MSI....

I've a gtx550-ti , 1 gb gddr5 cyclone ii
Bought close to Rm500

still kicking since 2012

Sapphire for me. Long ago I had a MSI Radeon GPU that kicked the bucket just after 3 years. That Sapphire still lasted me 4+ years until I mothballed that system it was in.

Mine is Nvidia...

No OC

All clean, no dust clogged whatever

Thats why can last more than a decade..

I'd take the Pulse, maybe SWFT/Dual as well.

Review for 6700 XT Pulse
Sapphire PULSE and NITRO + RX 6700 XT test

Meaning after 4 years its kicked the bucket?
It's similar price for all of it.. I read quite number review.. Sapphire pulse is most choosen..but don't have review compare it to xfx swft 309.. I jz wondering the temperature since it have 3 fan.. I think probably I will go with pulse

still contemplating whether to get 7900 Xt or XTX. the price difference in malaysia is huge compared to US!

Nah its still alive (I guess?) as I haven't used it anymore for the last 10 years after I got my laptop and now my Alderlake rig. But the last time I recall running it, it was still working and gaming then.

Its becuz AMD Msia are smoking some strong stuff thinking their products are hot stuff. In USA/EU, AMD are fighting for marketshare so they keep giving discounts and promos (like getting Jedi Survivor game free!). Here they dun care their GPU dun even sell.

If convert the price still cheap in msia

Cheap here? RX 7900XTX MSRP is USD$1000 (RM 4475) but here the cheapest XTX is Asrock PG @RM 5099 (diff of RM 600)
Conversely
RTX 4080 MSRP is USD$1200 (RM 5370) but here cheapest 4080 is Zotac Sanitary Napkin @RM 5570 (diff of RM 200) which is a lot more reasonable

Whatmore Radeons go for sale in US under MSRP. I would have been a Radeon fan again if prices were more in tune with USA.

This post has been edited by babylon52281: Feb 27 2023, 02:44 PM

Maybe I check only old 1 generation.. Like 6000 series.. I find out it similar n cheaper a little bit.. If we buy from USA + postage ady more also.. I jz search like 6700xt 6750xt 6800xt and multiply 4.2..

RX6000s ady 2-3 years old and prices too much variable between our markets, cannot compare. The current new gens are closer to MSRP prices which Nvidia & AMD intends to sell us. So we can still compare our markets if we stick by official selling price.

If you buy from USA, you oso need to declare and pay duty/tax on it which will defo bump the price higher than getting locally lar. If you want to 'run under' you risk it getting impounded by Kastam and giving ur prized XTX to a lucky Kastam officer.

Kastam & LHDN are our 2 only most efficient Govt departments

Erm I installed my GPU now it show no signal.. What is the problem? Plug in dp and hdmi no matter to mobo or gpu it still show no signal.. Gpu fan is spinning

Whats your system spec?
Does keyboard capslock light turn on when you press it?

Not sure is it because I use the same pcie cable for 8 + 6.
I tried seperate it then it works...
then later on when i install amd adreline screen turn black after 10 min waiting still black.. force shutdown..
turn it on again then it works..

Since 2 pcie cable seperate i do another cable management...
once done no gpu signal again... then force shutdown...
Then now back to normal..

System i5 13400 + b760m wifi 16gb ddr5, kc3000 ssd, viva gold 750w

Then try my Genshin game on this system, setting auto selected high..
CPU temperature good, min 34C high 59C

But GPU seems high? I not sure which part should i focus on.
using Antec DP 502 Flux
Should i worry on this temperature?

Hotspot is usually that hot. If it reach 105c then you might need to reapply the thermal paste or RMA it.
If you experience some flicking/stuttering or screen goes black, try to turn off MPO. https://www.reddit.com/r/Amd/comments/yvyqc..._mpo_fixed_all/

Weird behaviour with the shutdown though;

Try ROG Realbench and Furmark for 1 hr at least. Monitor with HWINFO, you shd be maxing out at 230W TDP (right now I see its 155W). Ur fan speed is 971rpm so it looks to be too low? Can try upping the fan curve with Afterburner.

Do you guys all re apply themal paste? i think doing reapply will void the warranty right?
So far no issue on screen..
Genshin i find out the brightness sometimes will change.. maybe i try download other game like mw to try.
I tried to run another 2 bench mark in aircond room below is the ss result.
I not really sure what setting i need to put.
First picture is set the resolution , anti alliasing off and run bench mark.. i cannot use preset benchmark as it ask me to select other resolution error when i select any of the 4 box.
2nd picture i find out i should put anti alliasing, i put 8x..
3rd picture i cannot find full resolution, i just simply run it..


This post has been edited by eddie2020: Mar 2 2023, 07:49 PM

Look find imo. Like i said, hotspot below 100c is totally fine.
I suggest undervolt your card so it will either use less power and heat or same power and heat but higher boost clock.

Ok i think will try this.. Do we need to do some fan tuning?


I found out there is some random buzzing sound when the gpu is running hard, not sure its fan sound or what weird sound..
the benchmark did not run max 230w, it go to 185w and the fan did not go to max spin..