CPU - 1 fan
north bridge - 1 fan
2 front intake - 2 fans
1 side intake - 1 fan
1 rear exhaust - 1 fan
1 top exhaust - 1 fan
PSU - 2 fans
GPU - 1 fan
HDD - 1 fan

11 fans total

CPU - 1x90mm fan
1 front intake - 1x120mm fan
1 side intake - 2x80m fans
1 rear exhaust - 1x120mm fan
1 top exhaust - 1x120mm fan
PSU - 1 fan
GPU - 1 fan

8 fans total

1 x 90mm (cpu)
2 x 80mm (2 x hdd)
3 x 120mm fan (front & bottom intake + rear exhaust)
2 x 80mm (top intake + rear exhaust)
2 x 60mm (ram)
2 x 40mm (chipset)
1 x 120mm (psu fan)
2 x gpu fan (7950GX2)




This post has been edited by arjuna_mfna: Feb 5 2007, 12:25 PM

CPU - 1 fan
north bridge - 1 fan
2 front intake - 1 fan
1 side intake - 1 fan
1 rear exhaust - 1 fan
PSU - 2 fans
GPU - 1 fan
PCI cooler - 2 fans

= 10 fans only

CPU -1 fan
Front intake - 1x12cm fan
Rear exhaust - 1x12cm fan
PSU - 1 fan

4 fans only

CPU - 1 fan
front intake - 1 fan
1 rear exhaust - 1 fan
PSU - 2 fans
GPU - 1 fan

= 6 fans only

CPU - 1 fan
PSU - 1 fan
GPU - 1 fan
front intake - 1 fan

dats it ..... 4 fans

8cm front intake - 2
8cm bottom hdd cooling - 2
8cm rear exhaust - 2
12cm top exhaust - 1
cpu cooler fan - 1
psu fan - 1

total: 9 fan

12 Cm Intake for HDD bay - 1 Papst 4412M GL/A
12 Cm Intake for Processor - 1 Papst 4412M GL/1
12 Cm Intake for Heatsink - 1 ADDA12L Series Hypro
12 Cm Exhaust for Graphics card - 1 Papst 4412M GL/B
12 Cm Blower for PCI Slot Exhaust -1 ADDA Unknown
8 Cm Exhaust for PSU and HDD bays - 2 Panaflo Hydrowave

7 Fans and that's about it.

Planning to upgrade the whole system to Papst Sintecs.

This post has been edited by empire23: Feb 12 2007, 01:15 AM

empire23,

howz the papst, any good?

front = 1 X 120mm
back = 2 X 80mm
cpu = 1 (not sure size)
hdd = 1 (not sure size)
psu = 1 x 120mm
total = 6 fans

^ for the Speeds they give nice, but not nice enough because they have a low frequency resonance that requires silicone dampeners to make sure the hum isn't transfered to my case which is rattle prone.

Planning on the few replacement candidates below. The flow figures for the 14 dbA's are pretty good

4412 F/2GL
4412 F/2GLLL
4414 F/2M

This post has been edited by empire23: Feb 12 2007, 01:38 AM

cpu x 2 fan
Gpu x 1 fan
Psu x 2 (8cm) fan
hard-disk x 1 (12cm) fan
casing x 3 fan

total 9 fan

i got 8 in my case, mostly 120mm

intake 1x120mm
exhaust 2x120mm
psu 1x80mm and 1x90mm (n
cpu 1x120mm
graphic card 1x120mm
1x80mm (got extra, so just attach it )

appreciate the info..at least its not a high pitched wail whihc some fans make.


Anyway heres the number of fans in my casing, list not finalised yet as im still experimenting:

4 x 120mm Thermaltake blue led fan
1 x 120mm Lian Li/Adda fan
1 x 120mm Vizo UV Led fan
1 x 140mm Evercool Red Scorpion
1 x zalman fatality fan for gc, forgot if its 80 or 90mm.
1 x 80mm psu fan

This post has been edited by cablesguy: Feb 23 2007, 12:25 AM

CPU - Stock intel (for now) =1
GC -Zalman =1
PSU -Acbel 120mm =1
Northbridge =1
Hdd (TT 92mm attached) =1
Front intake(TT LED 120mm) =1
Rear intake (CM white 120mm =1
Side panel (vantec UVLED 92mm) =1

TOTAL = 8 fans

CPU-watercooled
GC-1 120mm nidec beta v
Chipset-1 80mm delta ffb
pwm-1 120mm ultra high pressure nmb alu fan
ram-two 60mm allngap custom ram coolers nmb
around the mobo-4 120mm nmb fans
psu-1 psu acbel 80mm

yeah i know its crazy, but i run open bench style so like that lah...

2 x 120mm Cpu fan(adda + CM UV fan on xp-120)
2 x 40mm (pccooling fan & hsf for N/B-S/B)
2 x 120mm front and rear case(cool HDD bay & exzos fan)
1 x 120mm PSU fan
1 x 120mm Transparent side panel fan (direct GC blow)
1 x GC fan

tat all of my fan : vote for 9 fan

1- HSF
1- PSU
1- casing outake

will add 1 VGA and 2 more casing VERY soon

1-HSF
1-GC
1-PSU
1-80mm Front Casing
1-120mm Rear Casing

5 only