1xHSF
3xcasing
1xpsu
1xgc

mine is 6:

1. HSF
2. PSU
3. Side panel
4. inlet
5. outlet
6. GPU

Gonna change inlet and outlet to 120mm CM fan...

BTW, can anyone suggest what size is optimum for inlet(front), outlet(back) & sidepanel fan...

one more thing is about the suck/blow. which fan suppose to blow & suck...

NOOB here

for my pc, not really high -end

1 fan ~ PSU
1 fan ~cpu [if with copper heatsink = very cool liau and enough]
1 fan suck out the heat in the casing [ locate at back of case]
1 fan suck in fresh air [ locate at front of ur case] or if no you can just plug the fan to help the circulate the air in the case,

mine is :

6x 120mm on wc radiator.
1x 120mm at hard disk


i think that all...dont like too much fan cos it will collect dust...

2 for HSF
1 x 12cm CM at the back for exhaust
1 x 12cm CM at the front for cool air intake...

1 PSU fan
1 GC fan
1 small fan for X-Fi card

me..err:

>>

.1 PSU fan
.2 Case fan, (1 at the back, 1 at front side)
.1 GPU fan
.1 HSF
.1 large side panel fan (dunno what the actual size of the fan)

<<

This post has been edited by atomik: Jan 27 2009, 09:51 PM

i got 12 fans!! Lol

bro, what casing are you using?

2 x 12cm fan on top
1 x 12cm at back
1 x 12cm side panel
1 x 14cm front
1 x 12cm CPU
1 x 14cm PSU
1 x Graphic Card fan (Zalman)

2x 80cm - exhaust
1x 80cm - NB
2x 80cm - intake
1x 40cm - ram

80cm? OMG.. tat is really big..

my fans:
2x 120mm - intake
3x 80mm - exhaust
1x 80mm - GC
1- HSf
1- PSU
all in my caplang casing..

LOL at 80cm fan

btw mine:
1 x 14cm fan (exhaust)
4 x 12cm fan (2 exhaust 2 intake,1 of them is the hsf fan)
1 x 8cm fan (exhaust)
1 x gc fan

1. 80mm x 1 = PC Power & Cooling 750W RED PSU
2. 120mm x 120mm x 25mm = ADDA Fan -> HDD Cage 1
3. 120mm x 120mm x 25mm = ADDA Fan -> HDD Cage 2
4. 120mm x 120mm x 38mm = Panaflo Fan -> 5.25" Drive Bay area
5. 120mm x 120mm x 25mm = ADDA Fan -> Exhaust
6. 120mm x 120mm x 25mm = Lian Li Fan -> HDD Cage 3 (exhaust)
7. 120mm x 120mm x 25mm = Vizo UV LED -> PCI Fan
8. 70mm x 70mm x 15mm = CoFan -> North Bridge Fan
9. 120mm x 120mm x 38mm = Sanyo Denki Fan -> CPU (ThermalRight HR-01 - pull)
10. 120mm x 120mm x 38mm = Sanyo Denki Fan -> CPU (ThermalRight HR-01 - push)

total 10 altogether...

damn... am i 120mm fan freak...

This post has been edited by sniper69: Apr 5 2009, 11:27 AM

im only using 7 fan
all 120mm fan

-Desktop-
3 for intake
2 for exhaust
2 for ram
1 for hdd
1 for gc
1 for hsf

-10 fans-

-Laptop-
2 120mm fans =)

This post has been edited by Jinster: Apr 5 2009, 04:21 PM

---

Added on April 5, 2009, 4:47 pm-Desktop-
2x 120 CM/=intake
1x80mm vaio=intake
1x 120mm CM=exhaust
1x140 mm GB=exhaust psu
1x 60mm =exhaust psu
2x 120mm for the processor
2x 80mm for GPU

total fan 10

casing shinobi hybrid with i cute casing

This post has been edited by mc_guiver: Apr 5 2009, 04:49 PM

3 fans.

1 = CPU
2 = GC
3 = the fan attached to my casing. i think to suck out hot air.

My HTPC (SFF - Silverstone SG01 casing)

5 fans

120mm PSU fan sucking air right off the Nitrogon NT-06 Lite heatsink (passive)
80mm CM silent fan for 2x HDs
80mm CM silent fan for blowhole on top
80mm CM silent fan for rear blowhole (over TV tuner card)
Slot blower fan sucking air off onboard GPU (hot!) and blowing it out back

Original Silverstone fans did not have RPM sensing wire, so I replaced them with the CM silent fans (RPM sensing) to keep noise levels down.

8 fans.
all cm 90cfm blue fan.
2 on geminII
1 at front.
1 at bottom.
1 at side panel.
1 at back
2 at top

8 fans

1 back
1 front
1 cpu
1 gpu
3 extra fan for....
1 external hdd