mine:
2 front intake
4 back exhaust
1 in psu
3 on radiator
1 on mosfet
1 on northbridge
2 on ram
2 on accelero s1 gpu cooler

you total it

This post has been edited by IcEMoCHa: Aug 2 2008, 01:24 PM

can use the mini fridge that's usually sold to put in cars to add to your cooling leh... going to try that sometime soon... need to mod it also... wan to try and build it inside my casing, instead of on my proc... hehehe...

1 x 120mm front intake (at HDD)
1 x 120mm side intake (at GPU / Mobo)
1 x 120mm exhaust
1 x GPU (4850 stock)
1 x CPU (AMD stock)

the PSU has 2 though, just noticed... not sure if they're both exhaust or only one of them is.

My old dusty rig which i seldom used. Standard setup for ancient stacker

3 x 120mm front intake on cage
1 x 120mm rear exhaust fan
1 x 120mm psu fan
1 x 120mm psu fan (Secondary PSU)
1 x 120mm CPU
1 x Mobo Curtain roll fan (don't recall the name, its used to cool the mobo)
1 x 80mm top exhaust.

I've stopped using delta and nidec beta v cause the noise is killing me. Now going mobile on laptop. the junk is left there like a white elephant.

I am having a HP PC. So i cant add fan at the front bcoz no holes or empty space..further more the HDD drive bay is there.. U guys have any idea how to put a fan in front for ventilation? I have

- a 80 mm fan UV LED at the side panel(just bought)
- a graphic card fan
- a cpu fan (not sure size)
- a rear fan(i think 120mm)

Planning to put a fan at the front.. bcoz there is no intake of air in my pc..

Any ideas?? Pls help me??

Thnx..

hjehey! im voter number 666.

well i've got 9 fans now in my rig;

4x 120mm (one intake; three exhaust)
2x 80mm (both exhaust)
2x 92mm (hsf)
1x 60mm (hsf)

top blowhole fan is modded with an on/off switch, and front intake is modded a 3 way switch.

maybe i'll get another fan for my sd964 since it support two fans config. but currently im happy with the air flows.

as for the switches, its use to regulate the voltages. plus, i get the option to switch them off for silence use, or when i sleep.

-edit- added another 92mm fan for my cpu to make push-pull config.

This post has been edited by arct: Dec 24 2008, 12:49 AM

1 140mm intake fan
1 120mm side panel fan
1 120mm exhaoust fan
2x120mm Hyper 212 fan
1 120mm psu fan

3x 120mm intake (Coolermaster HDD Module)
2x 120mm Sidepanel intake
1x 120mm exaust
2x Coolermaster PSU fan
1x stock hsf
1x GPu fan

Total =10

me only got 5 fan for my pc..mybe next month 10-12.hehe

now my cpu uses 7 fans excluding cooler's fan.

all CM product btw

11 for now. lastime start from 3

since i got no casing... here's the pictar...



120x120x38 Panaflo blowing towards triplets of my HDDs

120x120x25 ADDA blowing to GPU PWM area

120x120x38 Sanyo Denki blowing RAM

70x70x15 Co-Fan blowing Northbridge

120x120x25 CoolerMaster UV Fan blowing HR-01; 120x120x25 LianLi exhaust HR-01

so total... exclude GPU Fan... 6 fans

2x120mm CM intake fans
1x120mm CM sidepanel fan
2x120mm CM top fans
1x120mm CM exhaust fan
2x120mm CM hsf
1x80mm mobo side panel fan
1 Gpu fan

hehe....

@sniper69

dude! that's nice, you dont face dust prob? i even put filters on my intake fans and there'll still be dust!

clean everyday?

woah.. lazy. normally i clean like after each sem. around 3 to 4 months. after adding a top blowhole fan my rig is sucking in more dust than before. my cpu fan is already got abit dust already after a few weeks. before this it takes around half a year for dust to accumulate on the fan fin.

My beloved fan....

-8 X 120mm 90cfm Cooler Blue LED Fan.
-1 X 230mm Intake HDD Fan Red LED.
-2 X VGA Fan (SLi here)
-1 X Northbridge fan
-1 X PSU Fan
-1 X CPU Cooler fan

Cheers...

This post has been edited by bathuzsai: Dec 14 2008, 11:27 AM

5 x 120mm 90CFM Blue LED Silent Fan
1 x 140mm 60.9CFM Blue LED Silent Fan

with spare x1 90CFM Blue LED Silent Fan and 69.69CFM Silent Fan.

+2 Normal Stock Fan
+1 Blue LED Stock Fan

8

I have:

5 fans on my casings
1 fan for the radiator at the back (watercooling maa)
1 on the Graphic Card
1 on my PSU
3 Above my rams

that makes it 11 fans..