Micro sim change to Nano sim

Where to do it
How to do it
Need $$?

If your simcard is old enough usually they can change FoC,

If not they charge like rm10 to replace sim card ( treated as you lost your old card )

Iinm for maxis hotlink if your old card is not 4G, you can change to nano 4G FoC

ok, will check with them

Welcome ifag

For digi if change RM15

Very leceh need to hand them IC and all
so I just ask ahbeng phone shop to cut, RM5 only

cut it yourself, i did that myself.

http://www.lelong.com.my/dual-nano-micro-s...7-01-Sale-I.htm

if u cheapo and want the convenience you can just cut it with a scissor
I had cut more then 5 piece all working perfectly, just pratice caution and try follow the outline as accurate as possible (actually meh simply cut just make sure it fit the sim holder and dun cut over the chip, u can cut into the chip no problem just make sure the sim chip still left 6 section intact lol)

I do this
But my signal always 3g

End up go to branch, pay rm10, get nano, and bang!
I got 4g in my house area

Cut version of sim not gonna goes well.
And the line always got bad signal

This post has been edited by acer7254: Oct 8 2016, 04:52 AM

No problems with mine, can get normal 4G fine but somehow cannot get 4G+ eventhough DiGi website say my area got 4G+ coverage

Should try change fresh new nano sim

Trust me it increase your signal

Few years back ifone mostly uses nano

cmon, now 2016, most phone already nano la

coz wanna save space and use as microsd...
I checked with other shop, baru RM10

Before this mine got cut from normal size to micro, so ugly, sometimes stuck also

But still havent contact service center, see can do it FOC or not..

i change digi nano sim for RM20

just diy can already

Maxis, over 10yrs customer, dealer shop, rm3

you recommend dealer shop over service center?

Using Celcom, didn't bother going to their store.

Seller did it for me during the time I bought my new phone, FOC.

Just gunting

Go internut download the template

i was desperate...went to maxis but they said they no specialised tool to do it. went to digi next door n they did it for me for RM5. the digi guy repeated n confirmed with me three times that if my sim card cannot be read after cutting, he not gonna be held responsible.

worked out fine for me. took like 20 seconds

Gunting kan ada.

Tis konlanfirm kena tipu. I chg at digi centre rm10 only

Cut yourself lor....Easy one

In the future, convert all your SIM cards to nano. Later just use adaptor. No need to cut or pay money.

Nowadays pipu use pico sim oledi... Nano sim is outdated...

My experience:

Digi FOC
Celcom FOC
Maxis FOC
OneXOX RM15
UMobile RM10

if your simcard not so old they do FOC

if need replace sim its charged

By standards, Nano Sim is a little thinner than average Sim cards. if the reader spring is not good, u'll experience bad signals, dropped etc

Now a days, so many /k tards know how to sunat SIM card.

Spring can adjust. No biggie.

Nope. It was nearer to me compare travel to service center.

How to get it done FOC?
and where?

I change digi centre plaza alam sentral ground floor

first time using nano sim dunno much about can get cheaper

myb he saw im just bought new phone then try increase the price

This post has been edited by lovesystem777: Oct 11 2016, 03:48 PM

ahbeng shop 2 mins settle