Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 PC in Car, do any of you have it?

views
     
Zyntherius
post Feb 12 2007, 08:07 PM

Getting Started
**
Junior Member
296 posts

Joined: Apr 2006
From: My Sanctuary @Klang Valley


I've build my self a pc for my car last year, this was my 1st DIY work...i still have it still working fine..and not much cash was spent on it.... the only thing that cost me at that time was the in dash TFT lcd...got it from Brothers, using the tv out on the GC. The case was made from an acrylic left overs from a signboard i had lying around...it is running on a P4 2.6, MSI micro ATX mainboard, HDD from a WD notebook HDD. Have 1 120mm vizo uv and 80mm vizo uv fan for cooling. In day time the temp will get as high as 49c, well i'm using the stock Intel fans...haven't change to any aftermarket ones, ram is a DDR 512 from Kingston and the psu i have to mod it a bit. No keyboard is attached to my cpu..only using a logitech wireless mouse. As logn as it can play MP3 and any movie file format...i'm good
Zyntherius
post Mar 2 2007, 11:52 AM

Getting Started
**
Junior Member
296 posts

Joined: Apr 2006
From: My Sanctuary @Klang Valley


QUOTE(EmperorMeng @ Feb 25 2007, 05:32 PM)
mind putting a pic?
*
you PM me asking to post the pix of my car pc..sorry for the delays... keep on forgetting to take pix...so here it is.. not much..coz i D.I.Y the enclosure... might be ugly..

Here's my Power/Reset button and Led's for HDD and Power
user posted image

I integrated my usb ports on my center console.
user posted image

This is my mouse to navigate through windows..ehehe..cute ain't it?
user posted image

And this is my 6.5 " indash TFT lcd i bought from brothers.... good enough for me!
user posted image

Ok now this is the CPU unit....not much but i laminate it with checked plate stickers...so that i doesn't absorb heat that is in the trunk.
user posted image

ok now this is a view of the internal parts... just the basic parts though!
user posted image

The coolers...1 unit of 120mm and 80 mm vizo fans.....mount 1 to blow and 1 to suck... the 80mm have the highest rpm so it is better for me to use it to suck all the hot air near the cpu HSF area.. i think it would be cooler that way.
user posted image

So this idling temp of my CPU....not bad huh? this was taken around 10am in the morning before i leave for work..
user posted image

this is taken after 45 minutes drive to my office.. i was running on Media Player 11 and the temp rise 3 degress... still ok larrr.. but if i run the visualization on the media player it can reach up to 44 degress..and you can see that the case temp irose quite a lot...which is still ok for me.
user posted image

and finally this is the night shot of my lcd running the media player visualization. biggrin.gif
user posted image



The End.....

This post has been edited by Zyntherius: Mar 2 2007, 01:07 PM
Zyntherius
post Mar 7 2007, 10:58 AM

Getting Started
**
Junior Member
296 posts

Joined: Apr 2006
From: My Sanctuary @Klang Valley


QUOTE(dman @ Mar 5 2007, 04:34 PM)
wow, impressive....even tho not new.
Will be much better if it is touch screen tongue.gif
*
Touch screen are expensive dude...especially the Liliput brand... plus its not easy to make touch screen works with pc's... requires special wiring..

@wcliang
I use an inverter to supply the power to the PSU.... The inverter i wired direct to the battery...its not a good idea to use the cigarettes lighter..becoz the fuse can't take it... and the inverter must be 300watss and above...

My inverters will not work if the pc is off..even though the inverter is switched on...i tried leaving the inverter switched on for 3 days without using the car ( that was on CNY holidays) after the 4th day... my car battery didn't die oso... so if incase i forgot to switch of the inverter my batter will not die..

This post has been edited by Zyntherius: Mar 7 2007, 11:04 AM

 

Change to:
| Lo-Fi Version
0.0158sec    0.37    7 queries    GZIP Disabled
Time is now: 6th December 2025 - 07:04 PM