RM529+RM20 With Shipping
HDMI CAR PC 7" TOUCHSCREEN





Specs
Manufacturer Specification

Main Function: 7 Inch Touchscreen Car Monitor (HD, AV, VGA)
Color: Black (Just like Knight Rider)
Material: Hard molded ABS
Screen: 7 Inch TFT LCD Touchscreen (1440000 Pixels)
Native Screen Resolution: 800 x 480 (VGA)
UP Resolution: 1720 x 1440 (VGA)
Brightness: 300cd/m2 (without touchscreen)
Contrast: 500:1
Viewing Angle: 70°/70°, 50°/60° (L/R, U/D)
Video Signal Input: 0.7 - 1.4Vp-p/75O
VGA Signal Input: H:30 - 60KHz, V:60-75Hz
Speaker: 250mW/7O
Color System: PAL-4.43, NTSC-3.57
Power Source: DC9-15V
Signal Input: PC, VGA, AV1, AV2, HDMI 1.2
Display Ratio: 16:9, 4:3
Power requirements +5VDC ( Maximum 100mA, typical 70mA, 50mV peak to peak maximum ripple)
Operating temperature 0 to 50Degrees Celsius
Storage Temperature -40 to 80Degrees Celsius
Relative Humidity 95% at 60 Degrees Celsius
Protocol RS232 Model: 9600 bauds, None parity, 8 data bits and 1 stop bit
USB Model: USB 1.1 Low speed
PS/2 Model: PS/2 mouse
Resolution 2048 X 2048
Report rate RS232 Model: Max. 160 points/sec
USB Model: Max. 160 points/sec
PS/2 Model: Max. 140 points/sec
Response time Resistive: Max. 35 ms
Capacitive: Max. 20 ms
Pin out definition
- 4 wire model: X+, Y+, X-, Y-
- 5 wire model: UL, UR, COM, LR, LL
- 8 wire model: X+, X+ref, Y+, Y+ref, X- , X-ref, Y-, Y-ref
Panel resistance 4, 8 wire resistive model: 200 ~ 900 ohm ( pin to pin on the same layer ) 5 wire resistive model: 50 ~ 200 ohm ( pin to pin on)
Inputs:
- VGA
- AV1 with mono sound
- AV2 no sound (for rear view camera)
- Camera Switch Remote Wire
- HDMI
Remote Controller: Yes
Supported Operating Systems for Touchscreen Software: Windows 97SE, XP, Vista, Windows 7, Linux, MAC
Certification: CE, FCC, RoHS
Dimensions: W:209 x L:145 x D:35 (mm)
Bracket: W:95 x L:140 x D:32 (mm)
Manufacturers Ref: UIYF062JH624
Calibration Fast full oriental 4 points position
Compensation Accuracy 25 points linearity compensation
Draw Test Position and linearity verification
Language Support 10 languages for Windows
Advanced Feature
- Support monitor / display rotation
- Support multiple monitor / display
- Support QVGA and Half-VGA function
- Support edge compensation
- Support constant touch
Controller Setting
- Support multiple controllers
- Dynamical add / remove controllers
- Change Controller interface without reboot
Mouse Emulator 1. Right / Left button emulation
- Normal / Click on touch / Click on release mode
- Auto right button
Sound Notification
- Sound option (No Sound / Touch Down / Lift Up)
- Frequency adjustment
- Duration adjustment
Double Click
- Configurable double click speed
- Configurable double click area
OS support 1. Windows 95 / 98 / ME / NT4 / 2000 / XP / Windows 7
Windows XP Tablet PC Edition
- Windows CE 2.12 / 3.0 / .NET
- Linux ( RedHat / Fedora / Mandrake /Suse / YellowDog )
- iMac. OS9.X / OSX
- MS-DOS
Support display resolution: 320x200, 640x200, 640x350, 640x480, 800x600, 1024x768 and 1280x1024
COM port support
- Support COM 1
- COM 256 for Windows and Linux
- COM 8 for DOS
Color: Brightness, Contrast, Color Temperature
Adjust: Auto Config, H Position, V Position, Phase, Clock
OSD:
- H position, V Position, OSD Time Out, Transparent
- Languages: English, Chinese, French, Italian, German, Spanish, Japanese, Russian
Settings: Reset, Display Ratio, LR, UD
Sound: Volume Control
User friendly
Low Energy Consumption
Can also be used as a tablet PC
4, 9 and 25 point touchscreen calibration
Detachable & Adhesive stand, can be placed on your Cars' dashboard
7 inch Touchscreen Monitor
User Manual - English
Remote Control
Car Cigar Lighter Power Adapter
SKS Cable (USB Cable, AV 9PIN VGA
Driver CD
Stylus / Touch Pen
Stand
Stand Sticky Pad
Mounting Frame
Power Adapter (100-240v)
Is it easy to install this LCD touch screen in my car?
Yes, you can place it anywhere you wish. It is provide with a mounting plate which has a foam rubber adhesive bottom so you can fix it on any flat surface. If you need to make use of the LCD touch screen monitor somewhere else, is can be easily detached from the base and taken out of the car.
Is it easy to install at my work desk?
Yes, it can be placed anywhere you wish. It is provide with a mounting stand which has a foam rubber adhesive bottom so you can fix it on any part of your desktop. By rotating the screen left or right you can make sure you always have it rotated to provide easy access to the information you want.
Can this LCD touch screen monitor be used for film making purposes?
Yes, this 7 inch LCD touch screen monitor is the perfect tool for location and studio filming. It provides flexible viewing in a size that is easy to mount on top of cameras or hold in your hands.

But i just afraid the touchscreen is not industrial gred which later on lari in the hot sun and lari at the night time like the old liliput.... secondly i also notice no reverse signal input.....

There also a problem if u want to fix in the dashboard coz the socket is on the side, even after we bukak the panel edi we need to desolder and relocate the socket... dunno how easy is this stuff!

---

Added on September 3, 2010, 4:51 pmSHIZZZZ CHECK OUT LELONG.COM... lotsa car pc monitor cheap cheap edi..... yahooooo....

Sorry littlemin... maybe our one is higher quality but i saw the same unit in lelong... ask the fellar highest resolution is how much... he says 800x600 onli... if we push up the monitor blank out..