check at fb page zordaq motorsport.. they can repair the iafm problem..

last time i had same issue but luckily i found out it in early stage.. so repairing iafm cost me rm50 only..

Depends on the damage bro.. for mine, he just change something and charge rm50 and after that no iafm sound..

price estimate front rm220per piece , rear rm120 per piece; normal one usually is KYB = KAYABA

fr pricing contact either
1) @allenultra (monroe, APM)
2) tom's Autopart
3) zordaq
4) Autohaus KL

p/s:i forgot how much i change KYB front, need to recheck receipt later.

Around RM100

Skip monroe. I was using it and leaked after 10 months. Get KYB RS ultra. 

Any recommendation for Saga BLM Auto (2008 ) engine mounting? I was quoted RM550 for a whole set with installation which I think is quite expensive considering the labor cost is RM200. I looked around online it cost around RM170 to RM230 but not sure which brand is good.

use LED . super bright type. min 3 x the brightness.

l had tried
1. halogen type.. phillips extreme,
2. 100watts .
    all disappointed.
3. hid - good but illegal

pls align the headlights. after fitting new bulbs.

yes. plug n play. adjust light beam height

Answer to no. 3

A good paint job would set you back for about rm4k

anyone tried castrol magnatec 10w-40? would you recommend it for saga flx?

Btw anyone know a reputable workshop for:

1) Replacing new drive shafts
2) Replacing new shock absorbers

My BLM after 11 yrs needs to replace already. Thanks.

Has he changed this hazard button? I had that happen to me once. Shop wants RM100 to replace it while the store only sells it for under RM30, hope he can follow this and DIY.

edit: This video has a better camera angle.

All in, how much ya? TQ.

Depends your condition:
Absorber:
if all 4 pcs front and back absorber should be around RM510 for KYB Excel G exclude labour (slightly better than Stock for handling).
If you go for better KYB RS Ultra Slightly expensive around RM560 exclude labour (Stiffer but alot better than stock).
Above price also exclude mounting and bush front 1 pair about 100, back 1pair about 80.

Spring:
If spring ok don't need change unless u feel ur spring very soft, original 4pcs 220 say really if not lowered FLX stock spring is ok already not too "soft". 

Lower Arm:
My FLX always got issue with lower arm. I really dunno is parts quality issue or what Original or Mitsubishi i used also same. Each year change 1 side. Rm 120-130 per side.

Stablizer link:
Ori 80 OEM about 40, but i usually go for ori OEM i takut the bush not tahan. So left and right sendiri x2 la.

Tie rod body + rack end + rubber boot :
1 set left right RM80

Drive shaft :
Left and Right 550 (Auto and Manual might have slight different price, this is Manual price, but wont too far apart la)

Engine Mounting:
1 set - Auto 200, Manual 230
All these exclude labour ya. Happy major maintenance for ware and tear.

Where you change your absorber and spring? how much ya ? I found 1 at Shah Alam absorber only full set charging me RM900 for KYB RS Ultra

How bad is the leak? As is do you need to top up engine oil before schedule service?