done that, still stuck at 5%.
yup, i remembered i changed that settings.
but not as high as double the value.
i increased by 10, and then i got different error, hence i didnt go any higher.

My HDMI monitor dont have speaker, any idea how i can have sound from this GT1? can it use USB speakers?

Hi guys,

I tried to update my Beelink Mini MXIII-II (S905X) over the air (latest firmware - 2017/6/6). After the update was done (but not fully completed), it restarted (as usual) so that it could optimize the apps. When it got to the 7th app to optimize, it didn't progress and hung after several minutes. I foolishly thought that maybe powering it off might restart the whole thing. But when I tried to power it on, it just can't. It will not power on. The blue light indicator won't light up.

I've read through this forum and tried many things. I tried to press the reset button at the bottom, but it will not turn on.

I tried to do the USB burning tool version 2.0.5.15 and 2.0.8 countless of times, but it stuck at 7%: [HUB1-1] [0x30201004]UBOOT/Disk initialize/Send command/Error result. Actually, the blue light lighted up once when I did the burning tool for the first time, at that time tool became idle for almost a minute at the 7% stage and after that the error message came out. Then, subsequently when I tried to do the burning tool again, the blue light didn't light up at the 7% stage. The error came up immediately at the 7% stage. I used many image files that I downloaded from the net, namely 106M0, 110M0, 112M0_AP6212, 112M0_Nano-20170606 and 112M0_Stock-20170606. All of them got stuck at 7%.

I also tried the SDcard method, but like I said, pressing the reset button will not let the blue light up and turn the power on.

I am not good in this, so maybe I missed something or just am not up to this. That's why I need your guys' help.

I have important data in the unit, so worst come to worst, I want my data back and don't care about the rest.

I hope you guys can help me.

Thank you.

Thank you for your feedback bro. However, it still got stuck at 7%. I've tried the burning tool version 2.0.5.15, 2.0.7.2 and 2.0.8 and all of them yield the same result.

This is the error log:
[22:44:18 255][Global][Inf]--Scan usb device
[22:44:18 255][Global][Inf]--Aml scan WorldCup Device
[22:44:18 474][Global][Inf]--Host: USB xHCI Compliant Host Controller
[22:44:18 474][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_a12f&subsys_06f81028&rev_31#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[22:44:18 474][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&26782c79&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[22:44:18 474][Global][Inf]-------->[Port0]NoDeviceConnected
[22:44:18 474][Global][Inf]-------->[Port1]NoDeviceConnected
[22:44:18 474][Global][Inf]-------->[Port2]Other device
[22:44:18 474][Global][Inf]-------->[Port3]Other device
[22:44:18 474][Global][Inf]-------->[Port4]NoDeviceConnected
[22:44:18 474][Global][Inf]-------->[Port5]Other device
[22:44:18 474][Global][Inf]-------->[Port6]NoDeviceConnected
[22:44:18 474][Global][Inf]-------->[Port7]Other device
[22:44:18 474][Global][Inf]-------->[Port8]NoDeviceConnected
[22:44:18 474][Global][Inf]-------->[Port9]NoDeviceConnected
[22:44:18 474][Global][Err]-------->[Port10]Error connect status 3
[22:44:18 489][Global][Err]-------->[Port11]Error connect status 3
[22:44:18 489][Global][Err]-------->[Port12]Error connect status 3
[22:44:18 489][Global][Err]-------->[Port13]Error connect status 3
[22:44:18 489][Global][Err]-------->[Port14]Error connect status 3
[22:44:18 489][Global][Err]-------->[Port15]Error connect status 3
[22:44:18 489][Global][Inf]-------->[Port16]NoDeviceConnected
[22:44:18 489][Global][Inf]-------->[Port17]NoDeviceConnected
[22:44:18 489][Global][Inf]-------->[Port18]NoDeviceConnected
[22:44:18 489][Global][Inf]-------->[Port19]NoDeviceConnected
[22:44:18 489][Global][Inf]--Scan USB host controller complete
[22:44:18 489][Global][Inf]--Update data center with HubMap
[22:44:24 598][Global][Inf]--User click open button
[22:44:33 280][Global][Inf]--Image path D:\Software\Beelink Mini MXIII-II\MINIMXIII-II_104M0 rev2.img
[22:44:42 028][Global][Inf]--Parsing burning package
[22:44:42 028][Global][Inf]--Load configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp
[22:44:42 028][Global][Inf]--Parse burning configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp\burn_config.xml
[22:44:42 074][Global][Inf]--Get burning key
[22:44:47 185][Global][Inf]--User click start button
[22:44:47 185][Global][Inf]--SetErase
[22:44:47 185][Global][Inf]--Enable burning 1
[22:44:47 185][Global][Inf]--Scan usb device
[22:44:47 185][Global][Inf]--Aml scan WorldCup Device
[22:44:47 238][Global][Inf]--Host: USB xHCI Compliant Host Controller
[22:44:47 238][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_a12f&subsys_06f81028&rev_31#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[22:44:47 238][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&26782c79&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[22:44:47 238][Global][Inf]-------->[Port0]NoDeviceConnected
[22:44:47 238][Global][Inf]-------->[Port1]NoDeviceConnected
[22:44:47 238][Global][Inf]-------->[Port2]Other device
[22:44:47 238][Global][Inf]-------->[Port3]Other device
[22:44:47 238][Global][Inf]-------->[Port4]NoDeviceConnected
[22:44:47 238][Global][Inf]-------->[Port5]Other device
[22:44:47 238][Global][Inf]-------->[Port6]NoDeviceConnected
[22:44:47 238][Global][Inf]-------->[Port7]Other device
[22:44:47 238][Global][Inf]-------->[Port8]NoDeviceConnected
[22:44:47 238][Global][Inf]-------->[Port9]NoDeviceConnected
[22:44:47 238][Global][Err]-------->[Port10]Error connect status 3
[22:44:47 238][Global][Err]-------->[Port11]Error connect status 3
[22:44:47 238][Global][Err]-------->[Port12]Error connect status 3
[22:44:47 238][Global][Err]-------->[Port13]Error connect status 3
[22:44:47 238][Global][Err]-------->[Port14]Error connect status 3
[22:44:47 238][Global][Err]-------->[Port15]Error connect status 3
[22:44:47 238][Global][Inf]-------->[Port16]NoDeviceConnected
[22:44:47 238][Global][Inf]-------->[Port17]NoDeviceConnected
[22:44:47 238][Global][Inf]-------->[Port18]NoDeviceConnected
[22:44:47 238][Global][Inf]-------->[Port19]NoDeviceConnected
[22:44:47 238][Global][Inf]--Scan USB host controller complete
[22:44:47 238][Global][Inf]--Update data center with HubMap
[22:46:09 266][Global][War]--User click stop button
[22:46:09 282][Global][Inf]--Enable burning 0
[22:46:11 485][Global][Inf]--User click refresh button
[22:46:31 236][Global][Inf]--User click start button
[22:46:31 236][Global][Inf]--SetErase
[22:46:31 236][Global][Inf]--Enable burning 1
[22:46:31 236][Global][Inf]--Scan usb device
[22:46:31 236][Global][Inf]--Aml scan WorldCup Device
[22:46:31 236][Global][Inf]--Host: USB xHCI Compliant Host Controller
[22:46:31 236][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_a12f&subsys_06f81028&rev_31#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[22:46:31 236][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&26782c79&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[22:46:31 236][Global][Inf]-------->[Port0]NoDeviceConnected
[22:46:31 236][Global][Inf]-------->[Port1]NoDeviceConnected
[22:46:31 236][Global][Inf]-------->[Port2]Other device
[22:46:31 236][Global][Inf]-------->[Port3]Other device
[22:46:31 236][Global][Inf]-------->[Port4]NoDeviceConnected
[22:46:31 252][Global][Inf]-------->[Port5]Other device
[22:46:31 252][Global][Inf]-------->[Port6]NoDeviceConnected
[22:46:31 252][Global][Inf]-------->[Port7]Other device
[22:46:31 252][Global][Inf]-------->[Port8]NoDeviceConnected
[22:46:31 252][Global][Inf]-------->[Port9]NoDeviceConnected
[22:46:31 252][Global][Err]-------->[Port10]Error connect status 3
[22:46:31 252][Global][Err]-------->[Port11]Error connect status 3
[22:46:31 252][Global][Err]-------->[Port12]Error connect status 3
[22:46:31 252][Global][Err]-------->[Port13]Error connect status 3
[22:46:31 252][Global][Err]-------->[Port14]Error connect status 3
[22:46:31 252][Global][Err]-------->[Port15]Error connect status 3
[22:46:31 252][Global][Inf]-------->[Port16]NoDeviceConnected
[22:46:31 252][Global][Inf]-------->[Port17]NoDeviceConnected
[22:46:31 252][Global][Inf]-------->[Port18]NoDeviceConnected
[22:46:31 252][Global][Inf]-------->[Port19]NoDeviceConnected
[22:46:31 252][Global][Inf]--Scan USB host controller complete
[22:46:31 252][Global][Inf]--Update data center with HubMap
[22:46:42 460][Global][Inf]--Catch DBT_DEVICEARRIVAL
[22:46:42 460][Global][Inf]--Scan usb device
[22:46:42 460][Global][Inf]--Aml scan WorldCup Device
[22:46:42 460][Global][Inf]--Host: USB xHCI Compliant Host Controller
[22:46:42 460][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_a12f&subsys_06f81028&rev_31#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[22:46:42 460][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&26782c79&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[22:46:42 460][Global][Inf]-------->[Port0]NoDeviceConnected
[22:46:42 460][Global][Inf]-------->[Port1]NoDeviceConnected
[22:46:42 460][Global][Inf]-------->[Port2]Other device
[22:46:42 460][Global][Inf]-------->[Port3]Other device
[22:46:42 460][Global][Inf]-------->[Port4]\\?\usb#vid_1b8e&pid_c003#5&37feeb43&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[22:46:42 460][Global][Inf]-------->[Port5]Other device
[22:46:42 460][Global][Inf]-------->[Port6]NoDeviceConnected
[22:46:42 460][Global][Inf]-------->[Port7]Other device
[22:46:42 460][Global][Inf]-------->[Port8]NoDeviceConnected
[22:46:42 460][Global][Inf]-------->[Port9]NoDeviceConnected
[22:46:42 460][Global][Err]-------->[Port10]Error connect status 3
[22:46:42 460][Global][Err]-------->[Port11]Error connect status 3
[22:46:42 460][Global][Err]-------->[Port12]Error connect status 3
[22:46:42 460][Global][Err]-------->[Port13]Error connect status 3
[22:46:42 460][Global][Err]-------->[Port14]Error connect status 3
[22:46:42 460][Global][Err]-------->[Port15]Error connect status 3
[22:46:42 460][Global][Inf]-------->[Port16]NoDeviceConnected
[22:46:42 460][Global][Inf]-------->[Port17]NoDeviceConnected
[22:46:42 460][Global][Inf]-------->[Port18]NoDeviceConnected
[22:46:42 460][Global][Inf]-------->[Port19]NoDeviceConnected
[22:46:42 460][Global][Inf]--Scan USB host controller complete
[22:46:42 460][Global][Inf]--Update data center with HubMap
[22:46:42 460][Global][Inf]--Insert new hub1
[22:46:42 491][Global][Inf]--Update hub1 device data
[22:46:42 491][Global][Inf]--Update HUB1-1
[22:46:42 491][HUB1-1][Inf]--Update device path
[22:46:42 491][Global][Inf]--Update HUB1-2
[22:46:42 491][HUB1-2][Inf]--Update device path
[22:46:42 491][Global][Inf]--Update HUB1-3
[22:46:42 491][HUB1-3][Inf]--Update device path
[22:46:42 491][Global][Inf]--Update HUB1-4
[22:46:42 491][HUB1-4][Inf]--Update device path
[22:46:42 491][Global][Inf]--Update HUB1-5 \\?\usb#vid_1b8e&pid_c003#5&37feeb43&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[22:46:42 491][HUB1-5][Inf]--Update device path
[22:46:42 507][Global][Inf]--Begin thread for HUB1-5
[22:46:42 507][Global][Inf]--Burning thread HUB1-5 start
[22:46:42 507][Global][Inf]--Update HUB1-6
[22:46:42 507][HUB1-6][Inf]--Update device path
[22:46:42 507][Global][Inf]--Update HUB1-7
[22:46:42 507][HUB1-7][Inf]--Update device path
[22:46:42 507][Global][Inf]--Update HUB1-8
[22:46:42 507][HUB1-8][Inf]--Update device path
[22:46:42 507][Global][Inf]--Update HUB1-9
[22:46:42 507][HUB1-9][Inf]--Update device path
[22:46:42 507][Global][Inf]--Update HUB1-10
[22:46:42 507][HUB1-10][Inf]--Update device path
[22:46:42 507][Global][Inf]--Update HUB1-11
[22:46:42 507][HUB1-11][Inf]--Update device path
[22:46:42 507][Global][Inf]--Update HUB1-12
[22:46:42 507][HUB1-12][Inf]--Update device path
[22:46:42 507][Global][Inf]--Update HUB1-13
[22:46:42 507][HUB1-13][Inf]--Update device path
[22:46:42 507][Global][Inf]--Update HUB1-14
[22:46:42 507][HUB1-14][Inf]--Update device path
[22:46:42 507][Global][Inf]--Update HUB1-15
[22:46:42 507][HUB1-15][Inf]--Update device path
[22:46:42 507][Global][Inf]--Update HUB1-16
[22:46:42 507][HUB1-16][Inf]--Update device path
[22:46:42 507][Global][Inf]--Update HUB1-17
[22:46:42 507][HUB1-17][Inf]--Update device path
[22:46:42 507][Global][Inf]--Update HUB1-18
[22:46:42 507][HUB1-18][Inf]--Update device path
[22:46:42 507][Global][Inf]--Update HUB1-19
[22:46:42 507][HUB1-19][Inf]--Update device path
[22:46:42 507][Global][Inf]--Update HUB1-20
[22:46:42 507][HUB1-20][Inf]--Update device path
[22:46:42 523][Global][Inf]--Burning thread HUB1-5 begin run
[22:46:42 523][HUB1-5][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&37feeb43&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x000008d0
[22:46:42 585][HUB1-5][Inf]--CloneImageProxy
[22:46:42 647][HUB1-5][Inf]--Connect path=USB xHCI Compliant Host Controller/P0/P4
[22:46:42 647][HUB1-5][Inf]--Start burning...
[22:46:42 724][HUB1-5][Inf]--------------ERASE BOOTLOADER------------
[22:46:42 763][HUB1-5][Inf]--0-7-0-16
[22:46:42 763][HUB1-5][Inf]--Identify status success
[22:46:42 763][HUB1-5][Inf]--    low_power
[22:46:42 768][HUB1-5][Inf]--Low power command success
[22:46:42 772][HUB1-5][Inf]--Read low power success
[22:46:42 772][HUB1-5][Inf]--bootloader_is_old
[22:46:42 772][HUB1-5][Inf]--Bootloader command success
[22:46:42 776][HUB1-5][Inf]--Bootloader is old
[22:46:42 776][HUB1-5][Inf]--erase_bootloader
[22:46:42 776][HUB1-5][Inf]--Erase command success
[22:46:42 779][HUB1-5][Inf]--Read erase status success
[22:46:42 779][HUB1-5][Inf]--reset
[22:46:42 780][HUB1-5][Inf]--reset command success
[22:46:43 797][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[22:46:43 798][Global][Inf]--Scan usb device
[22:46:43 798][Global][Inf]--Aml scan WorldCup Device
[22:46:43 799][Global][Inf]--Host: USB xHCI Compliant Host Controller
[22:46:43 799][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_a12f&subsys_06f81028&rev_31#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[22:46:43 799][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&26782c79&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[22:46:43 799][Global][Inf]-------->[Port0]NoDeviceConnected
[22:46:43 799][Global][Inf]-------->[Port1]NoDeviceConnected
[22:46:43 799][Global][Inf]-------->[Port2]Other device
[22:46:43 800][Global][Inf]-------->[Port3]Other device
[22:46:43 800][Global][Inf]-------->[Port4]NoDeviceConnected
[22:46:43 800][Global][Inf]-------->[Port5]Other device
[22:46:43 800][Global][Inf]-------->[Port6]NoDeviceConnected
[22:46:43 801][Global][Inf]-------->[Port7]Other device
[22:46:43 801][Global][Inf]-------->[Port8]NoDeviceConnected
[22:46:43 801][Global][Inf]-------->[Port9]NoDeviceConnected
[22:46:43 801][Global][Err]-------->[Port10]Error connect status 3
[22:46:43 801][Global][Err]-------->[Port11]Error connect status 3
[22:46:43 801][Global][Err]-------->[Port12]Error connect status 3
[22:46:43 801][Global][Err]-------->[Port13]Error connect status 3
[22:46:43 801][Global][Err]-------->[Port14]Error connect status 3
[22:46:43 801][Global][Err]-------->[Port15]Error connect status 3
[22:46:43 801][Global][Inf]-------->[Port16]NoDeviceConnected
[22:46:43 801][Global][Inf]-------->[Port17]NoDeviceConnected
[22:46:43 801][Global][Inf]-------->[Port18]NoDeviceConnected
[22:46:43 801][Global][Inf]-------->[Port19]NoDeviceConnected
[22:46:43 801][Global][Inf]--Scan USB host controller complete
[22:46:43 801][Global][Inf]--Update data center with HubMap
[22:46:43 801][Global][Inf]--Update hub1 device data
[22:46:43 801][Global][Inf]--Update HUB1-1
[22:46:43 801][HUB1-1][Inf]--Update device path
[22:46:43 801][Global][Inf]--Update HUB1-2
[22:46:43 801][HUB1-2][Inf]--Update device path
[22:46:43 801][Global][Inf]--Update HUB1-3
[22:46:43 801][HUB1-3][Inf]--Update device path
[22:46:43 801][Global][Inf]--Update HUB1-4
[22:46:43 801][HUB1-4][Inf]--Update device path
[22:46:43 801][Global][Inf]--Update HUB1-5
[22:46:43 801][HUB1-5][Inf]--Update device path
[22:46:43 801][Global][Inf]--Update HUB1-6
[22:46:43 802][HUB1-6][Inf]--Update device path
[22:46:43 802][Global][Inf]--Update HUB1-7
[22:46:43 802][HUB1-7][Inf]--Update device path
[22:46:43 802][Global][Inf]--Update HUB1-8
[22:46:43 802][HUB1-8][Inf]--Update device path
[22:46:43 802][Global][Inf]--Update HUB1-9
[22:46:43 802][HUB1-9][Inf]--Update device path
[22:46:43 802][Global][Inf]--Update HUB1-10
[22:46:43 802][HUB1-10][Inf]--Update device path
[22:46:43 802][Global][Inf]--Update HUB1-11
[22:46:43 802][HUB1-11][Inf]--Update device path
[22:46:43 802][Global][Inf]--Update HUB1-12
[22:46:43 802][HUB1-12][Inf]--Update device path
[22:46:43 802][Global][Inf]--Update HUB1-13
[22:46:43 802][HUB1-13][Inf]--Update device path
[22:46:43 802][Global][Inf]--Update HUB1-14
[22:46:43 802][HUB1-14][Inf]--Update device path
[22:46:43 802][Global][Inf]--Update HUB1-15
[22:46:43 802][HUB1-15][Inf]--Update device path
[22:46:43 802][Global][Inf]--Update HUB1-16
[22:46:43 802][HUB1-16][Inf]--Update device path
[22:46:43 802][Global][Inf]--Update HUB1-17
[22:46:43 802][HUB1-17][Inf]--Update device path
[22:46:43 802][Global][Inf]--Update HUB1-18
[22:46:43 802][HUB1-18][Inf]--Update device path
[22:46:43 802][Global][Inf]--Update HUB1-19
[22:46:43 802][HUB1-19][Inf]--Update device path
[22:46:43 802][Global][Inf]--Update HUB1-20
[22:46:43 802][HUB1-20][Inf]--Update device path
[22:46:43 817][HUB1-5][Inf]--Device is removed
[22:46:46 798][Global][Inf]--Catch DBT_DEVICEARRIVAL
[22:46:46 798][Global][Inf]--Scan usb device
[22:46:46 798][Global][Inf]--Aml scan WorldCup Device
[22:46:46 798][Global][Inf]--Host: USB xHCI Compliant Host Controller
[22:46:46 798][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_a12f&subsys_06f81028&rev_31#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[22:46:46 798][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&26782c79&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[22:46:46 798][Global][Inf]-------->[Port0]NoDeviceConnected
[22:46:46 798][Global][Inf]-------->[Port1]NoDeviceConnected
[22:46:46 798][Global][Inf]-------->[Port2]Other device
[22:46:46 798][Global][Inf]-------->[Port3]Other device
[22:46:46 798][Global][Inf]-------->[Port4]\\?\usb#vid_1b8e&pid_c003#5&37feeb43&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[22:46:46 798][Global][Inf]-------->[Port5]Other device
[22:46:46 798][Global][Inf]-------->[Port6]NoDeviceConnected
[22:46:46 798][Global][Inf]-------->[Port7]Other device
[22:46:46 798][Global][Inf]-------->[Port8]NoDeviceConnected
[22:46:46 798][Global][Inf]-------->[Port9]NoDeviceConnected
[22:46:46 798][Global][Err]-------->[Port10]Error connect status 3
[22:46:46 798][Global][Err]-------->[Port11]Error connect status 3
[22:46:46 798][Global][Err]-------->[Port12]Error connect status 3
[22:46:46 798][Global][Err]-------->[Port13]Error connect status 3
[22:46:46 798][Global][Err]-------->[Port14]Error connect status 3
[22:46:46 798][Global][Err]-------->[Port15]Error connect status 3
[22:46:46 798][Global][Inf]-------->[Port16]NoDeviceConnected
[22:46:46 798][Global][Inf]-------->[Port17]NoDeviceConnected
[22:46:46 798][Global][Inf]-------->[Port18]NoDeviceConnected
[22:46:46 798][Global][Inf]-------->[Port19]NoDeviceConnected
[22:46:46 798][Global][Inf]--Scan USB host controller complete
[22:46:46 798][Global][Inf]--Update data center with HubMap
[22:46:46 798][Global][Inf]--Update hub1 device data
[22:46:46 798][Global][Inf]--Update HUB1-1
[22:46:46 798][HUB1-1][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-2
[22:46:46 798][HUB1-2][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-3
[22:46:46 798][HUB1-3][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-4
[22:46:46 798][HUB1-4][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-5 \\?\usb#vid_1b8e&pid_c003#5&37feeb43&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[22:46:46 798][HUB1-5][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-6
[22:46:46 798][HUB1-6][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-7
[22:46:46 798][HUB1-7][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-8
[22:46:46 798][HUB1-8][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-9
[22:46:46 798][HUB1-9][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-10
[22:46:46 798][HUB1-10][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-11
[22:46:46 798][HUB1-11][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-12
[22:46:46 798][HUB1-12][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-13
[22:46:46 798][HUB1-13][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-14
[22:46:46 798][HUB1-14][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-15
[22:46:46 798][HUB1-15][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-16
[22:46:46 798][HUB1-16][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-17
[22:46:46 798][HUB1-17][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-18
[22:46:46 798][HUB1-18][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-19
[22:46:46 798][HUB1-19][Inf]--Update device path
[22:46:46 798][Global][Inf]--Update HUB1-20
[22:46:46 798][HUB1-20][Inf]--Update device path
[22:46:46 829][HUB1-5][Inf]--Device is connected
[22:46:46 829][HUB1-5][Inf]--Close device handle 0x000008d0
[22:46:46 892][HUB1-5][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&37feeb43&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x00000704
[22:46:46 970][HUB1-5][Inf]-------------Download DDR.USB-----------
[22:46:46 970][HUB1-5][Inf]--2-2-0-0
[22:46:46 970][HUB1-5][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[22:46:47 481][HUB1-5][Inf]--Control write pll reg1 0xd9000000:0x00005183
[22:46:47 988][HUB1-5][Inf]--Write initial succeed
[22:46:47 988][HUB1-5][Inf]--Upload encrypt at 0xc8100228
[22:46:47 988][HUB1-5][Inf]--ulValue = 0xadfc318c
[22:46:47 988][HUB1-5][Inf]--Read encrypt value succeed
[22:46:48 013][HUB1-5][Inf]--Transfer complete
[22:46:48 013][HUB1-5][Inf]--Run at address 0xd9000000
[22:46:48 014][HUB1-5][Inf]--RunInRam succeed
[22:46:48 036][HUB1-5][Inf]--2-2-0-0
[22:46:48 036][HUB1-5][Inf]--CheckFileRunState succeed
[22:46:48 036][HUB1-5][Inf]--runResult:0x      0,paraMagic:0x7856efab
[22:46:48 036][HUB1-5][Inf]--ddrCapacity:0x    800
[22:46:48 061][HUB1-5][Inf]-------------Download UBOOT.USB-----------
[22:46:48 062][HUB1-5][Inf]--2-2-0-0
[22:46:48 062][HUB1-5][Inf]--ulValue = 0xadfc318c
[22:46:48 062][HUB1-5][Inf]--Download DDR.USB buffer at 0xd9000000
[22:46:48 070][HUB1-5][Inf]--Transfer complete
[22:46:48 070][HUB1-5][Inf]--Download UBOOT.USB buffer at 0x0200c000
[22:46:48 210][HUB1-5][Inf]--Transfer complete
[22:46:48 212][HUB1-5][Inf]--DownCheckPara succeed
[22:46:48 212][HUB1-5][Inf]--Run at address 0xd9000000
[22:46:48 252][HUB1-5][Inf]--ReadCheckPara succeed
[22:46:48 252][HUB1-5][Inf]--Download DDR.USB buffer at 0xd9000000
[22:46:48 261][HUB1-5][Inf]--Transfer complete
[22:46:48 261][HUB1-5][Inf]--DownRunPara succeed
[22:46:48 261][HUB1-5][Inf]--Run at address 0xd9000000
[22:46:49 616][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[22:46:49 616][Global][Inf]--Scan usb device
[22:46:49 616][Global][Inf]--Aml scan WorldCup Device
[22:46:49 631][Global][Inf]--Host: USB xHCI Compliant Host Controller
[22:46:49 631][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_a12f&subsys_06f81028&rev_31#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[22:46:49 631][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&26782c79&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[22:46:49 631][Global][Inf]-------->[Port0]NoDeviceConnected
[22:46:49 631][Global][Inf]-------->[Port1]NoDeviceConnected
[22:46:49 631][Global][Inf]-------->[Port2]Other device
[22:46:49 631][Global][Inf]-------->[Port3]Other device
[22:46:49 631][Global][Inf]-------->[Port4]NoDeviceConnected
[22:46:49 631][Global][Inf]-------->[Port5]Other device
[22:46:49 631][Global][Inf]-------->[Port6]NoDeviceConnected
[22:46:49 631][Global][Inf]-------->[Port7]Other device
[22:46:49 631][Global][Inf]-------->[Port8]NoDeviceConnected
[22:46:49 631][Global][Inf]-------->[Port9]NoDeviceConnected
[22:46:49 631][Global][Err]-------->[Port10]Error connect status 3
[22:46:49 631][Global][Err]-------->[Port11]Error connect status 3
[22:46:49 631][Global][Err]-------->[Port12]Error connect status 3
[22:46:49 631][Global][Err]-------->[Port13]Error connect status 3
[22:46:49 631][Global][Err]-------->[Port14]Error connect status 3
[22:46:49 631][Global][Err]-------->[Port15]Error connect status 3
[22:46:49 631][Global][Inf]-------->[Port16]NoDeviceConnected
[22:46:49 631][Global][Inf]-------->[Port17]NoDeviceConnected
[22:46:49 631][Global][Inf]-------->[Port18]NoDeviceConnected
[22:46:49 631][Global][Inf]-------->[Port19]NoDeviceConnected
[22:46:49 631][Global][Inf]--Scan USB host controller complete
[22:46:49 631][Global][Inf]--Update data center with HubMap
[22:46:49 631][Global][Inf]--Update hub1 device data
[22:46:49 631][Global][Inf]--Update HUB1-1
[22:46:49 631][HUB1-1][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-2
[22:46:49 631][HUB1-2][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-3
[22:46:49 631][HUB1-3][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-4
[22:46:49 631][HUB1-4][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-5
[22:46:49 631][HUB1-5][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-6
[22:46:49 631][HUB1-6][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-7
[22:46:49 631][HUB1-7][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-8
[22:46:49 631][HUB1-8][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-9
[22:46:49 631][HUB1-9][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-10
[22:46:49 631][HUB1-10][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-11
[22:46:49 631][HUB1-11][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-12
[22:46:49 631][HUB1-12][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-13
[22:46:49 631][HUB1-13][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-14
[22:46:49 631][HUB1-14][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-15
[22:46:49 631][HUB1-15][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-16
[22:46:49 631][HUB1-16][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-17
[22:46:49 631][HUB1-17][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-18
[22:46:49 631][HUB1-18][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-19
[22:46:49 631][HUB1-19][Inf]--Update device path
[22:46:49 631][Global][Inf]--Update HUB1-20
[22:46:49 631][HUB1-20][Inf]--Update device path
[22:46:49 678][HUB1-5][Inf]--Device is removed
[22:46:50 847][Global][Inf]--Catch DBT_DEVICEARRIVAL
[22:46:50 848][Global][Inf]--Scan usb device
[22:46:50 848][Global][Inf]--Aml scan WorldCup Device
[22:46:50 848][Global][Inf]--Host: USB xHCI Compliant Host Controller
[22:46:50 848][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_a12f&subsys_06f81028&rev_31#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[22:46:50 849][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&26782c79&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[22:46:50 849][Global][Inf]-------->[Port0]NoDeviceConnected
[22:46:50 849][Global][Inf]-------->[Port1]NoDeviceConnected
[22:46:50 849][Global][Inf]-------->[Port2]Other device
[22:46:50 849][Global][Inf]-------->[Port3]Other device
[22:46:50 850][Global][Inf]-------->[Port4]\\?\usb#vid_1b8e&pid_c003#5&37feeb43&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[22:46:50 851][Global][Inf]-------->[Port5]Other device
[22:46:50 851][Global][Inf]-------->[Port6]NoDeviceConnected
[22:46:50 851][Global][Inf]-------->[Port7]Other device
[22:46:50 851][Global][Inf]-------->[Port8]NoDeviceConnected
[22:46:50 851][Global][Inf]-------->[Port9]NoDeviceConnected
[22:46:50 851][Global][Err]-------->[Port10]Error connect status 3
[22:46:50 851][Global][Err]-------->[Port11]Error connect status 3
[22:46:50 851][Global][Err]-------->[Port12]Error connect status 3
[22:46:50 851][Global][Err]-------->[Port13]Error connect status 3
[22:46:50 851][Global][Err]-------->[Port14]Error connect status 3
[22:46:50 851][Global][Err]-------->[Port15]Error connect status 3
[22:46:50 851][Global][Inf]-------->[Port16]NoDeviceConnected
[22:46:50 851][Global][Inf]-------->[Port17]NoDeviceConnected
[22:46:50 851][Global][Inf]-------->[Port18]NoDeviceConnected
[22:46:50 851][Global][Inf]-------->[Port19]NoDeviceConnected
[22:46:50 851][Global][Inf]--Scan USB host controller complete
[22:46:50 852][Global][Inf]--Update data center with HubMap
[22:46:50 852][Global][Inf]--Update hub1 device data
[22:46:50 852][Global][Inf]--Update HUB1-1
[22:46:50 852][HUB1-1][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-2
[22:46:50 852][HUB1-2][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-3
[22:46:50 852][HUB1-3][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-4
[22:46:50 852][HUB1-4][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-5 \\?\usb#vid_1b8e&pid_c003#5&37feeb43&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[22:46:50 852][HUB1-5][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-6
[22:46:50 852][HUB1-6][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-7
[22:46:50 852][HUB1-7][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-8
[22:46:50 852][HUB1-8][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-9
[22:46:50 852][HUB1-9][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-10
[22:46:50 852][HUB1-10][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-11
[22:46:50 852][HUB1-11][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-12
[22:46:50 852][HUB1-12][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-13
[22:46:50 852][HUB1-13][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-14
[22:46:50 852][HUB1-14][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-15
[22:46:50 852][HUB1-15][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-16
[22:46:50 852][HUB1-16][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-17
[22:46:50 852][HUB1-17][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-18
[22:46:50 852][HUB1-18][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-19
[22:46:50 852][HUB1-19][Inf]--Update device path
[22:46:50 852][Global][Inf]--Update HUB1-20
[22:46:50 852][HUB1-20][Inf]--Update device path
[22:46:50 906][HUB1-5][Inf]--Device is connected
[22:46:50 906][HUB1-5][Inf]--Close device handle 0x00000704
[22:46:50 969][HUB1-5][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&37feeb43&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}  0x00000a54
[22:46:56 032][HUB1-5][Inf]--0-7-0-16
[22:46:56 032][HUB1-5][Inf]--CheckFileRunState succeed
[22:46:56 048][HUB1-5][Inf]--    low_power
[22:46:56 063][HUB1-5][Inf]--Send command success
[22:46:56 063][HUB1-5][Inf]--Read command status success
[22:46:56 063][HUB1-5][Inf]-------------Download meson1.dtb-----------
[22:46:56 063][HUB1-5][Inf]--0-7-0-16
[22:46:56 095][HUB1-5][Inf]--    download mem dtb normal 77824
[22:46:56 095][HUB1-5][Inf]--Send download command success
[22:46:56 110][HUB1-5][Inf]--Read command status success
[22:46:56 142][HUB1-5][Inf]--Transfer complete
[22:46:56 142][HUB1-5][Inf]--Send download get_status command succeed
[22:46:56 157][HUB1-5][Inf]--get_status success
[22:46:56 673][HUB1-5][Inf]-------------ERASE FLASH-----------
[22:46:56 673][HUB1-5][Inf]--disk_initial 1
[22:46:56 673][HUB1-5][Inf]--Send command success
[22:46:57 798][HUB1-5][Err]--failed:[22:46:57 798][HUB1-5][Err]--Check command return failed
[22:46:57 923][HUB1-5][Err]--[0x30201004]UBOOT/Disk initialize/Send command/Error result
[22:46:57 923][HUB1-5][Inf]--Close device handle 0x00000a54
I hope I made a tiny mistake. Appreciate everybody's feedback. Thanks in advance.

Just asking bro, how do you know that from the log, the USB cable is not connected?

I'm using Dell PC (desktop).

I have used 2 different USB cables, but the result is the same.

The burning tool states that the device is connected (other wise different error code).

I don't get your final sentence bro.......

It doesn't make any difference.

Factory reset can't be even performed.

I have given up. I think I have to accept the fact that it is dead. But can the data inside the box be recovered at all?

Factory resetting was the first first, second, third, 4th,.... 10th thing I tried right after the box was bricked. The reason it's called "hard-bricked" is because the menu of the factory reset can't be accessed. When I pushed down the button nothing happens. The thing is, when I do the SDcard method of reflashing, it shows the box is upgrading, but it fails to upgrade after a few seconds. That's the only time when the blue light (power on) is lit.

Anyone encountered this b4 on MXiii ii stuck at boot? Have tried unplug the power still the same?

Hi, anyone here can confirm the hypptv everywhere working on Beelink GT1 or Mini MXIII-2 ?

Scumbag beelink. Mana A912 punya update 😂. At least provide the wifi firmware files ler

how many bits is BEELINK SEA I ?
Cant seem to find this info

Even after wipe data and reboot, still stuck at this... On mini mxiii ii....

After a day of use, I kinda like ATV version over normal Android. GT1 ultimate does perform better compared to normal 2gb ram GT1. Quite noticable when playing Hearthstone. Lesser loading time and animations are snappier. Just now I'm not sure if this is given by the extra Ram in GT1 or due to superceleron's mod to enable all 8 cores sync. Gonna keep this box till newer armlogic chip released

@khalid, did u perform any vent mods to your beelink devices? I'm thinking alang2 I cracked open the body, heatsinks or additional vents will help in the long run. Any tips?

Anyone try this?? mind to share comment and screenshot