here's my experience with samsung rm39 official screen protector:
2 pieces, feels better quality than those cheapo rm5 PET sp. not quite tempered glass feeling but better than usual PET.
covers almost all of the screen including almost 99% of the side edges, but not camera/iris scanner otherwise it'll interfere with image quality and infrared scanning.
very high in difficulty installing this SP without soap technique. if you misaligned it a bit too many degrees to the left or right theres a chance a small part of the edge of the SP will stick to the metal frame instead of screen and this will cause lifting.
i've installed it dried to test it out and couldn't get it 100% perfect, by my estimation about 1mm off centre. also had to spend quite a bit of time to squeeze out the bubbles compared to flat sp. also surprised that 2-3 dust speck bubbles were able to be flattened out. usually the bubble in normal PET SP will remain big no matter how much you try to squeeze it out.
any casing that is covering more than the metal edge frame or touching the edge screen will most probably cause SP to lift even after fitting casing correctly cos you'll most certainly drag the sp along when taking out the phone from your pants pocket.
personally not satisfied if it's not 100% correctly fitted, but will do for now until more reports and tests are out on the gorilla glass 5 durability. then i'll probably ditch the sp and go naked like my current s7e.
Samsung Galaxy Note 7 Official Discussion V4!, Release date postponed to September 2016
Aug 22 2016, 12:27 PM
Quote
0.0781sec
0.56
7 queries
GZIP Disabled