[OFFICIAL] Ubiquiti Networks, Home/SOHO/Enterprise Networking
|
|
 Jul 26 2016, 02:36 PM, updated 10 months ago
Show posts by this member only | Post
#1
|
 
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk   
|
 Ubiquiti Networking Products Commonly Used In Malaysia / Singapore airFiber Wireless Backhaul » Click to show Spoiler - click again to hide... « Enterprise Access Points » Click to show Spoiler - click again to hide... « airMax Fixed Outdoor Wireless » Click to show Spoiler - click again to hide... « This post has been edited by pandera999: Dec 3 2018, 12:10 PM |
|
|
|
|
|
Jul 26 2016, 02:36 PM
Show posts by this member only | Post
#2
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
UBNT Series Switching and Routing » Click to show Spoiler - click again to hide... « EdgeMax Carrier Routing » Click to show Spoiler - click again to hide... « UBNT UFiber » Click to show Spoiler - click again to hide... « Amplify Wi-Fi » Click to show Spoiler - click again to hide... « QUOTE Edge Switch or UBNT Switch How to Update Firmware?EdgeSwitch targets the Broadband / ISP / Carrier market while UBNT Switch targets the Enterprise / SMB market. The UBNT switch products are designed for a wider IT audience, and therefore, tend to be simpler, and easier to use. Unlike the EdgeSwitch, there is no built-in software user interface on the UBNT Switch. **Update UBNT Controller on Linux** Updating UBNT Controller    Distributors & Master Resellers  This post has been edited by pandera999: Feb 1 2025, 01:42 PM |
|
|
Jul 26 2016, 02:41 PM
Show posts by this member only | Post
#3
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
New Product  *price is for US market. Some units may only for US & Canada market. Do contact local supplier for more info Gaming Performance Tutorials Tutorial on Ubiquiti EdgeRouter for Telekom Malaysia Unifi/Maxis Fiber credits to wanttotree This post has been edited by pandera999: Jan 17 2019, 12:36 AM |
|
|
Jul 27 2016, 12:11 AM
Show posts by this member only | IPv6 | Post
#4
|
Junior Member
87 posts Joined: Jul 2016
|
Am keen to start using an edge router but am not too sure how to configure it for unifi
|
|
|
Jul 27 2016, 12:38 AM
Show posts by this member only | Post
#5
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(sikentut @ Jul 27 2016, 12:11 AM) Am keen to start using an edge router but am not too sure how to configure it for unifi i have 1 friend using it for unifi.. modem - edge router lite (setting as 1wan+2lan) the configuration is kinda user friendly.. have wizard setting to do it for you. then, just a little configuration, then you are done. |
|
|
Jul 27 2016, 01:35 AM
Show posts by this member only | Post
#6
|
Senior Member
975 posts Joined: Sep 2004 From: Setapak 
|
QUOTE(sikentut @ Jul 27 2016, 12:11 AM) Am keen to start using an edge router but am not too sure how to configure it for unifi me too, just curious to configure pppoe+hypptv. configure pppoe vlan, no problem..to configure for both, im still  |
|
|
|
|
|
Jul 27 2016, 10:18 AM
Show posts by this member only | Post
#7
|
|
Junior Member
87 posts Joined: Jul 2016
|
QUOTE(rioven @ Jul 27 2016, 01:35 AM) me too, just curious to configure pppoe+hypptv. configure pppoe vlan, no problem..to configure for both, im still Maybe a how-to guide would be good? |
|
|
Jul 29 2016, 01:50 PM
Show posts by this member only | Post
#8
|
Senior Member
960 posts Joined: Jan 2003
|
im using unifi and TPlink router (TL-WR1043ND), can i turn off wifi access on tp link router and use UNIFI AP AC LITE?
|
|
|
Jul 29 2016, 05:05 PM
Show posts by this member only | Post
#9
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(IceBikers @ Jul 29 2016, 01:50 PM) im using unifi and TPlink router (TL-WR1043ND), can i turn off wifi access on tp link router and use UNIFI AP AC LITE? yes. why not. |
|
|
Jul 29 2016, 05:06 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(rioven @ Jul 27 2016, 01:35 AM) me too, just curious to configure pppoe+hypptv. configure pppoe vlan, no problem..to configure for both, im still QUOTE(sikentut @ Jul 27 2016, 10:18 AM) Maybe a how-to guide would be good? currently ppoe+happytv is using which device? tm device?  |
|
|
Jul 29 2016, 05:38 PM
|
|
Junior Member
322 posts Joined: Dec 2007
|
Can you propose a complete system for 3 storey semi-d, if I want to maximize speed with cat 5e cables, swicthes and wifi on all three floor with some coverage to the outside garden as well?
|
|
|
Jul 29 2016, 05:51 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(kutitata @ Jul 29 2016, 05:38 PM) Can you propose a complete system for 3 storey semi-d, if I want to maximize speed with cat 5e cables, swicthes and wifi on all three floor with some coverage to the outside garden as well? can u send email to QUOTE jennifer@advancedatan.com the detail of your requirement? we will give proposal for you.  |
|
|
Jul 29 2016, 09:06 PM
|
|
Senior Member
975 posts Joined: Sep 2004 From: Setapak
|
QUOTE(pandera999 @ Jul 29 2016, 05:06 PM) currently ppoe+happytv is using which device? tm device? last time I configure for a friend once (luckily he don't bother about hypptv). the way I configure that time (about 2 years ago) using CLIQUOTE configure Now I try to figure it out if I wanna both (vlan pppoe+hypptv). i have a basic knowledge to configure few brands like dlink, asus, tplink and mikrotik.set interfaces ethernet eth1 vif 10 pppoe 0 user-id <username> set interfaces ethernet eth1 vif 10 pppoe 0 password <password> commit save |
|
|
|
|
|
Jul 30 2016, 08:25 AM
|
|
Senior Member
960 posts Joined: Jan 2003
|
QUOTE(pandera999 @ Jul 29 2016, 05:05 PM) yes. why not. thanks.knowing that the OS controller isnt built into the AP, but a software in PC/MAC/Mobile. Does the controller need to run keep open? |
|
|
Jul 30 2016, 03:54 PM
|
|
Junior Member
87 posts Joined: Jul 2016
|
QUOTE(pandera999 @ Jul 29 2016, 05:06 PM) currently ppoe+happytv is using which device? tm device? Using an Asus tt-n56u |
|
|
Aug 1 2016, 09:21 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(rioven @ Jul 29 2016, 09:06 PM) last time I configure for a friend once (luckily he don't bother about hypptv). the way I configure that time (about 2 years ago) using CLI currently how do u think they configure for happytv+ppoe? 2 WAN or 2 LAN? Now I try to figure it out if I wanna both (vlan pppoe+hypptv). i have a basic knowledge to configure few brands like dlink, asus, tplink and mikrotik. edge OS CLI? QUOTE(IceBikers @ Jul 30 2016, 08:25 AM) thanks. its ok to close. controller just for configuration and do some changes+monitoring. knowing that the OS controller isnt built into the AP, but a software in PC/MAC/Mobile. Does the controller need to run keep open? |
|
|
Aug 1 2016, 05:03 PM
|
|
Senior Member
975 posts Joined: Sep 2004 From: Setapak
|
QUOTE(pandera999 @ Aug 1 2016, 09:21 AM) currently how do u think they configure for happytv+ppoe? 2 WAN or 2 LAN? most probably 1wan+2lan (in wizard), after that need to add vlan for PPPoE and hypptv. Yup edge OS do have CLI, which most ubnt user used for advance config (there are a lot of video Edge OS CLI). The only way that I can figure it out (let say eth1 from unifi modem and eth2 for hypptv) edge OS CLI? QUOTE configure Bridge may cause performance drop because is using some cpu power. im not sure if bridge will disable pppoe offloadset interfaces ethernet eth1 vif 500 pppoe 0 user-id <username> set interfaces ethernet eth1 vif 500 pppoe 0 password <password> set interfaces bridge br0 set interfaces ethernet eth1 vif 600 bridge-group bridge br0 set interfaces ethernet eth2 vif 600 bridge-group bridge br0 commit save |
|
|
Aug 1 2016, 05:26 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(rioven @ Aug 1 2016, 05:03 PM) most probably 1wan+2lan (in wizard), after that need to add vlan for PPPoE and hypptv. Yup edge OS do have CLI, which most ubnt user used for advance config (there are a lot of video Edge OS CLI). The only way that I can figure it out (let say eth1 from unifi modem and eth2 for hypptv) i might want try to experimenting it. Bridge may cause performance drop because is using some cpu power. im not sure if bridge will disable pppoe offload  will share once done experimenting have happytv too... but we dont have the tv but we paid expensive. TM cheating us. |
|
|
Aug 2 2016, 07:04 PM
|
|
Junior Member
383 posts Joined: May 2005
|
For home user that thinking of getting ER-L, I suggest get ER-X instead. ER-L ideally paired with switches & ER-L only will be fast if you use the hardware offloading feature. You can get ER-X for half the price of ER-L. Anything that require CPU such as QoS or VPN, ER-X will be fine (2x880MHz MIPS32 vs 2x500MHz MIPS64 of ER-L). ER-X does have per port VLAN tagging & some basic HW offloading features added in latest firmware.
|
|
|
Aug 5 2016, 02:42 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jio @ Aug 2 2016, 07:04 PM) For home user that thinking of getting ER-L, I suggest get ER-X instead. ER-L ideally paired with switches & ER-L only will be fast if you use the hardware offloading feature. You can get ER-X for half the price of ER-L. Anything that require CPU such as QoS or VPN, ER-X will be fine (2x880MHz MIPS32 vs 2x500MHz MIPS64 of ER-L). ER-X does have per port VLAN tagging & some basic HW offloading features added in latest firmware. true. ER-L very limited port. for personal user, ER-X is much better |
|
|
Aug 6 2016, 09:34 PM
|
Junior Member
321 posts Joined: Jan 2003
|
Am using UNIFI AP, and Unifi AP-LR series.
Nice thin client AP with controller, best of all license if free for controller software. Overall, controller features aren't impressive but suitable for average SME business and cafe environment usage. One thing cool compare to average home AP like TPlink, I have been switching on the unit for months, still running stable. |
|
|
Aug 6 2016, 09:51 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(goolias @ Aug 6 2016, 09:34 PM) Am using UNIFI AP, and Unifi AP-LR series. great Nice thin client AP with controller, best of all license if free for controller software. Overall, controller features aren't impressive but suitable for average SME business and cafe environment usage. One thing cool compare to average home AP like TPlink, I have been switching on the unit for months, still running stable.  personal usage or sme business usage? . the gui also quite user friendly.. esp the switches and firewall... + having cloudkey enable u to control via cloud without attending the place |
|
|
Aug 8 2016, 01:51 PM
|
|
Junior Member
87 posts Joined: Jul 2016
|
QUOTE(pandera999 @ Aug 6 2016, 09:51 PM) great How much is the erx with unifi setup? personal usage or sme business usage? . the gui also quite user friendly.. esp the switches and firewall... + having cloudkey enable u to control via cloud without attending the place |
|
|
Aug 8 2016, 03:00 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(sikentut @ Aug 8 2016, 01:51 PM) How much is the erx with unifi setup? rm320 |
|
|
Aug 8 2016, 03:12 PM
|
|
Junior Member
87 posts Joined: Jul 2016
|
QUOTE(pandera999 @ Aug 8 2016, 03:00 PM) rm320 Does the device come with QoS? |
|
|
Aug 8 2016, 04:10 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(sikentut @ Aug 8 2016, 03:12 PM) Does the device come with QoS? yes. it comes with qoS |
|
|
Aug 9 2016, 04:48 PM
|
|
Junior Member
52 posts Joined: Jan 2009
|
Where can I get an ERL in Penang?
I want to give it a try! My current home network is as follows: - 1) 100Mbps TIME Fiber 2) D-Link DIR-850L (came with TIME package) as main router to assign IP & routing. I have the WiFi radio turn off. I don't like the limited feature & cannot use DD-WRT firmware! 3) Use Aztech HomePlug 500Mbps to wire to 3 rooms for 3 APs. 4) Living room - TP-Link Archer C7 v2 as AP (5GHz only). 5) Room one - Linksys EA2700 as AP (5GHZ only). 6) Room two - Apple AirExpress 2012 Gen2 as AP (both 2.4GHZ & 5GHz) With laptop direct connect to DIR-850L, I can get close to 100Mbps speedtest to time.com. However, thru my iPhone6S connected to Archer C7 with channel 149 at 80MHz channel width, I only roughly get 75+Mbps downlink & 80+Mbps uplink. I want to try a "better" wired router. This post has been edited by wafer: Aug 9 2016, 04:52 PM |
|
|
Aug 9 2016, 05:16 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wafer @ Aug 9 2016, 04:48 PM) Where can I get an ERL in Penang? its kinda enterprise router.. so it might be costly a bit... try check lelong.I want to give it a try! My current home network is as follows: - 1) 100Mbps TIME Fiber 2) D-Link DIR-850L (came with TIME package) as main router to assign IP & routing. I have the WiFi radio turn off. I don't like the limited feature & cannot use DD-WRT firmware! 3) Use Aztech HomePlug 500Mbps to wire to 3 rooms for 3 APs. 4) Living room - TP-Link Archer C7 v2 as AP (5GHz only). 5) Room one - Linksys EA2700 as AP (5GHZ only). 6) Room two - Apple AirExpress 2012 Gen2 as AP (both 2.4GHZ & 5GHz) With laptop direct connect to DIR-850L, I can get close to 100Mbps speedtest to time.com. However, thru my iPhone6S connected to Archer C7 with channel 149 at 80MHz channel width, I only roughly get 75+Mbps downlink & 80+Mbps uplink. I want to try a "better" wired router. |
|
|
Aug 9 2016, 05:30 PM
|
|
Junior Member
52 posts Joined: Jan 2009
|
ERL maybe an over-kill in my home. Let me check more on ER-X.
My biggest problem of the D-Link router is that QoS is not working. The moment I setup QoS, it kills the network speed down to ~8Mbps. This post has been edited by wafer: Aug 9 2016, 05:32 PM |
|
|
Aug 9 2016, 05:36 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wafer @ Aug 9 2016, 05:30 PM) ERL maybe an over-kill in my home. Let me check more on ER-X. wow... dlink qos is killing speed My biggest problem of the D-Link router is that QoS is not working. The moment I setup QoS, it kills the network speed down to ~8Mbps.  for home usage, its much better use ERX. ERL is good usage with switches. |
|
|
Aug 10 2016, 10:28 AM
|
|
Junior Member
52 posts Joined: Jan 2009
|
I have a question on ER-X with SFP.
The TIME.com Fiber comes with a Huawei EchoLife HG8240H ONT. Since ER-X has a SFP port, can I plug the fiber optic directly into ER-X without an ONT & set it up to run? |
|
|
Aug 10 2016, 10:39 AM
|
|
Junior Member
321 posts Joined: Jan 2003
|
QUOTE(wafer @ Aug 10 2016, 10:28 AM) I have a question on ER-X with SFP. dun think so, Time OLT and CPE OLT is tied by proprietary protocol.The TIME.com Fiber comes with a Huawei EchoLife HG8240H ONT. Since ER-X has a SFP port, can I plug the fiber optic directly into ER-X without an ONT & set it up to run? However, you can always ask Time about it, their technician seem better than TM. |
|
|
Aug 10 2016, 12:14 PM
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
I read great reviews for this product but there isn't any proper seller channel here in malaysia so there's not a lot of information I can get about the products.
I'm planning to upgrade my home wireless router/modem combo. Currently using streamyx. It will be great if the router signal can get thru 3 floors. Anyone can point me to the right direction ? |
|
|
Aug 10 2016, 02:33 PM
|
|
Junior Member
52 posts Joined: Jan 2009
|
QUOTE(meh_man @ Aug 10 2016, 12:14 PM) I read great reviews for this product but there isn't any proper seller channel here in malaysia so there's not a lot of information I can get about the products. Hi meh-man,I'm planning to upgrade my home wireless router/modem combo. Currently using streamyx. It will be great if the router signal can get thru 3 floors. Anyone can point me to the right direction ? There is no short answer to your question. If I needed to redo my whole network again, I could: - 1) Plan for >100Mbps fiber boardband, 2) Use Gigabit switch, LAN & CAT6 cables, 3) Use dedicated wired router to manage DCHP, routing traffic, QoS, etc. 4) Use WiFi APs to cover all 3 floors (diff SSID). WiFi-AC at 5GHz channel is rated at 867Mbps, but range is much lower than WiFi-N at 2.4GHz. Note. It is too early to consider mesh-Wifi (Eero or Luma)! No point paying premium to be their lab rat...! |
|
|
Aug 10 2016, 06:51 PM
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
QUOTE(wafer @ Aug 10 2016, 02:33 PM) Hi meh-man, Hi I just reread my post and I think I was too vague with what I want out of the setup. I live in a rural area so i doubt unify is coming anytime soon. I only plan to get a wireless AP since I think that's all I can afford for the moment. I plan to reuse the modem TM gave me. Plus this is for home use so at most its 5-10 max at a time. So a high end router is out of the question. I'm sick and tired of generic low quality bullshit products from tp,asus dlink etc. There is no short answer to your question. If I needed to redo my whole network again, I could: - 1) Plan for >100Mbps fiber boardband, 2) Use Gigabit switch, LAN & CAT6 cables, 3) Use dedicated wired router to manage DCHP, routing traffic, QoS, etc. 4) Use WiFi APs to cover all 3 floors (diff SSID). WiFi-AC at 5GHz channel is rated at 867Mbps, but range is much lower than WiFi-N at 2.4GHz. Note. It is too early to consider mesh-Wifi (Eero or Luma)! No point paying premium to be their lab rat...! TLDR version : What is the cheapest wireless AP compatible with streamyx ? |
|
|
Aug 10 2016, 08:58 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(meh_man @ Aug 10 2016, 06:51 PM) Hi I just reread my post and I think I was too vague with what I want out of the setup. I live in a rural area so i doubt unify is coming anytime soon. I only plan to get a wireless AP since I think that's all I can afford for the moment. I plan to reuse the modem TM gave me. Plus this is for home use so at most its 5-10 max at a time. So a high end router is out of the question. I'm sick and tired of generic low quality bullshit products from tp,asus dlink etc. there is Wireless AP long range... up to 183mTLDR version : What is the cheapest wireless AP compatible with streamyx ? |
|
|
Aug 10 2016, 09:11 PM
|
|
Junior Member
76 posts Joined: May 2008 From: Sabah
|
QUOTE(pandera999 @ Aug 10 2016, 08:58 PM) there is Wireless AP long range... up to 183m Model number ? Any rough estimate on the pricing ? |
|
|
Aug 10 2016, 10:17 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(meh_man @ Aug 10 2016, 09:11 PM) Model number ? Any rough estimate on the pricing ? UAP LR only...visit my sig.. ubiquiti products kinda focus from SME range.. so, its probably pricey a bit for u.. but, so far.. no issue |
|
|
Sep 7 2016, 02:30 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
Manage do load balacing using Edge Router PoE 5 Port. 4 WAN/ 1 Lan.
|
|
|
Sep 7 2016, 02:32 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(meh_man @ Aug 10 2016, 09:11 PM) Model number ? Any rough estimate on the pricing ? UAP LR, rm400 |
|
|
Sep 8 2016, 02:11 PM
|
|
Junior Member
87 posts Joined: Jul 2016
|
QUOTE(pandera999 @ Sep 7 2016, 02:32 PM) UAP LR, rm400 Ac version? |
|
|
Sep 8 2016, 02:32 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(sikentut @ Sep 8 2016, 02:11 PM) Ac version? uap ac lr - 510 per unit, exclude gst and delivery |
|
|
Sep 16 2016, 12:52 PM
|
Senior Member
4,776 posts Joined: Jan 2003
|
Hi Pandera999, I am keen to move to an edgerouter for my 500mb time fiber connection at home. Currently using an Asus rt-ac68u as router/AP combo device. It's good and stable but I'm curious about ubiquiti now
 Thinking of having an edgerouter dedicated to routing ie with NAT and the Asus as my dual band AP. What do you recommend - the erx or erlite? Do quote your prices too if you don't mind. Thanks. |
|
|
Sep 16 2016, 04:35 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(kmrdeva @ Sep 16 2016, 12:52 PM) Hi Pandera999, I am keen to move to an edgerouter for my 500mb time fiber connection at home. Currently using an Asus rt-ac68u as router/AP combo device. It's good and stable but I'm curious about ubiquiti now hi, im using ERLite for tm fiber for time being.... and want to switch time fiber soon too.... there is something good and bad bout ubiquiti honestly to say. the good thing is, its suitable for sme, and can customized using CLI due to build in linux in router. and can be configured according to ur needs, + support load balancing features in case you have 2 different ISP. the bad is, it might be pricey for some people especially home user. sometimes, hard to configure as well. Thinking of having an edgerouter dedicated to routing ie with NAT and the Asus as my dual band AP. What do you recommend - the erx or erlite? Do quote your prices too if you don't mind. Thanks. if you are using it for home using, i recommend u to get ERX around RM326 (not include gst and delivery) edge router lite is suitable if you have switches, but if u are home user, its might be not that suitable for you unless you have switches. p/s: i dont sell ubnt...  i just create garage sales for my friend... since she is handle everything so far and using my acc to view sometimes. since there is no ubiquiti discussion thread here, therefore i create one to get more feedback from user.This post has been edited by pandera999: Sep 16 2016, 04:35 PM |
|
|
Sep 18 2016, 08:55 PM
|
|
Senior Member
4,776 posts Joined: Jan 2003
|
QUOTE(pandera999 @ Sep 16 2016, 04:35 PM) if you are using it for home using, i recommend u to get ERX around RM326 (not include gst and delivery) ER-X seems to have high speed processor but lower RAM that ER-Lite. Still not too sure which can really support a 500mbps WAN.edge router lite is suitable if you have switches, but if u are home user, its might be not that suitable for you unless you have switches. I have gigabit switches, no worries about the limited Ethernet ports on both routers. |
|
|
Sep 18 2016, 09:37 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(kmrdeva @ Sep 18 2016, 08:55 PM) ER-X seems to have high speed processor but lower RAM that ER-Lite. Still not too sure which can really support a 500mbps WAN. 500mbps... well... what will u use it for? may explain in detailI have gigabit switches, no worries about the limited Ethernet ports on both routers. |
|
|
Sep 18 2016, 10:04 PM
|
|
Senior Member
4,776 posts Joined: Jan 2003
|
QUOTE(pandera999 @ Sep 18 2016, 09:37 PM) 500mbps... well... what will u use it for? may explain in detail I'm already using an Asus RT-AC68U with my 500Mb Time Fibre connection. Home user here with about 12 devices (wireless and wired). Biggest use case is concurrent streaming of HD media - Netflix, iFlix, Youtube, Spotify and web browsing. I don't need VPN server functionality or DMZ and such.My question is - will the ER-X or ER-Lite be a better NAT router for my home vs. the RT-AC68U? Or am I better off using consumer-grade stuff like Netgear, Linksys, Asus? |
|
|
Sep 19 2016, 09:36 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(kmrdeva @ Sep 18 2016, 10:04 PM) I'm already using an Asus RT-AC68U with my 500Mb Time Fibre connection. Home user here with about 12 devices (wireless and wired). Biggest use case is concurrent streaming of HD media - Netflix, iFlix, Youtube, Spotify and web browsing. I don't need VPN server functionality or DMZ and such. ER-Lite is much suitable and sustain your packet transfer need.. but it comes with 3 port only and not support wifi. u might need asus router to become dumb router to broadcast wifi since u have few devices that will access internet through it.....My question is - will the ER-X or ER-Lite be a better NAT router for my home vs. the RT-AC68U? Or am I better off using consumer-grade stuff like Netgear, Linksys, Asus? |
|
|
Sep 19 2016, 12:40 PM
|
|
Senior Member
4,776 posts Joined: Jan 2003
|
QUOTE(pandera999 @ Sep 19 2016, 09:36 AM) ER-Lite is much suitable and sustain your packet transfer need.. but it comes with 3 port only and not support wifi. u might need asus router to become dumb router to broadcast wifi since u have few devices that will access internet through it..... So ER-Lite it is then, slower CPU but more RAM and with hardware acceleration too, I believe.3 ports, i.e. 1 for WAN (PPPOE). Can the remaining 2 ethernet ports be grouped into a LAN? Need to expand the LAN port with a gigabit switch. No problem. I've managed Fortigate and Netscreen firewalls in my previous job plus used PFSense before, so learning the CLI is not a big issue. Yeah, if I go for the ER-Lite the plan is to set the AC68U as my dual band wifi access point. How much does the ER-Lite go for, buddy? |
|
|
Sep 19 2016, 12:54 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(kmrdeva @ Sep 19 2016, 12:40 PM) So ER-Lite it is then, slower CPU but more RAM and with hardware acceleration too, I believe. then it should be not an issue to u to have this ER-Lite... 3 ports, i.e. 1 for WAN (PPPOE). Can the remaining 2 ethernet ports be grouped into a LAN? Need to expand the LAN port with a gigabit switch. No problem. I've managed Fortigate and Netscreen firewalls in my previous job plus used PFSense before, so learning the CLI is not a big issue. Yeah, if I go for the ER-Lite the plan is to set the AC68U as my dual band wifi access point. How much does the ER-Lite go for, buddy? yes.. 2 remaining port can be grouped into LAN... and its fully customize router.. with user friendly interface.. i pm u the price. |
|
|
Sep 20 2016, 12:36 PM
|
Junior Member
18 posts Joined: Mar 2016
|
Hi,
Can you give the cheapest solution to create point-to-point wireless connection between 2 buildings upto 2km apart? And also suitable for weather condition in Malaysia (a lot of rain, thunder etc.). As for bandwidth, it is not important, I only need 10mbs connection between the two points. Thanks. This post has been edited by zebrabiker: Sep 20 2016, 12:41 PM |
|
|
Sep 20 2016, 12:42 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(zebrabiker @ Sep 20 2016, 12:36 PM) Hi, can use NanoBeam 5AC-19 due to good outdoor design and loss signal is much less during heavy rain+thunder. even there is lightning rod nearby, i still suggest to put surge arrestor to prevent damage..Can you give the cheapest solution to create point-to-point wireless connection between 2 buildings upto 2km apart? And also suitable for weather condition in Malaysia (a lot of rain, thunder etc.). Thanks. |
|
|
Sep 20 2016, 12:55 PM
|
|
Junior Member
18 posts Joined: Mar 2016
|
QUOTE(pandera999 @ Sep 20 2016, 12:42 PM) can use NanoBeam 5AC-19 due to good outdoor design and loss signal is much less during heavy rain+thunder. even there is lightning rod nearby, i still suggest to put surge arrestor to prevent damage.. Thanks for the very quick reply I edited my post but you answered it too fast.. Like I mentioned in my edited post, I dont need a lot of bandwidth, only enough for internet connection between the 2 points about 10mbs. In addition, the elevation of the points will be quite low and so the signal might go through some trees. Are there any other cheaper but reliable alternatives that fit my requirements? |
|
|
Sep 20 2016, 02:26 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(zebrabiker @ Sep 20 2016, 12:55 PM) Thanks for the very quick reply welcome I edited my post but you answered it too fast.. Like I mentioned in my edited post, I dont need a lot of bandwidth, only enough for internet connection between the 2 points about 10mbs. In addition, the elevation of the points will be quite low and so the signal might go through some trees. Are there any other cheaper but reliable alternatives that fit my requirements? powerbeam as alternative (have dish) but once again, we did have test it before, during heavy rain + trees blocking.. signal interference kinda worse.. that was 600m distance... as your case, 2km distance will be a very big issue... |
|
|
Sep 20 2016, 02:30 PM
|
Senior Member
1,144 posts Joined: Jan 2003 From: Republik Of Kelantanese
|
baru terjebak dengan ubnt. sedang mencari USG 2nd kalau ada yang nak jual murah2
 |
|
|
Sep 20 2016, 02:49 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(AsuKi @ Sep 20 2016, 02:30 PM) baru terjebak dengan ubnt. sedang mencari USG 2nd kalau ada yang nak jual murah2  maybe at garage sales.. |
|
|
Sep 20 2016, 03:41 PM
|
|
Junior Member
18 posts Joined: Mar 2016
|
QUOTE(pandera999 @ Sep 20 2016, 02:26 PM) welcome The distance is actually only about 500m and I have just checked the line of sight between the two points seems to be clear from trees and other obstructions. From the information I got in ubiquiti forum, signal below 10ghz is not affected by rain but I dont know about heavy rain. I think my setup would be possible with either litebeam or nanobeam from what I have gathered, powerbeam is way out of my budget. powerbeam as alternative (have dish) but once again, we did have test it before, during heavy rain + trees blocking.. signal interference kinda worse.. that was 600m distance... as your case, 2km distance will be a very big issue...My big concern is now how to protect the two stations from direct lightning strikes. Does a lightning arrester attached on top of of the mounting beam going to help the stations from being hit by lightning? |
|
|
Sep 20 2016, 04:14 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(zebrabiker @ Sep 20 2016, 03:41 PM) The distance is actually only about 500m and I have just checked the line of sight between the two points seems to be clear from trees and other obstructions. From the information I got in ubiquiti forum, signal below 10ghz is not affected by rain but I dont know about heavy rain. I think my setup would be possible with either litebeam or nanobeam from what I have gathered, powerbeam is way out of my budget. nanobeam is should be efficient enuf to deliver good speed and able to work well during heavy rain and thunder. according to my friend in malaysia, he did setup it on 1 company in puchong which the company use nanobeam as temporary device. distance was 600m. nanobeam giving good air quality. My big concern is now how to protect the two stations from direct lightning strikes. Does a lightning arrester attached on top of of the mounting beam going to help the stations from being hit by lightning? surge arrestor usually put behind that protect the device not really attach on mounting beam. so, nanobeam will be expose outside.. and surge arrestor usually put behind nanobeam but not on the mounting pole QUOTE  |
|
|
Sep 20 2016, 07:35 PM
|
|
Junior Member
18 posts Joined: Mar 2016
|
QUOTE(pandera999 @ Sep 20 2016, 04:14 PM) nanobeam is should be efficient enuf to deliver good speed and able to work well during heavy rain and thunder. according to my friend in malaysia, he did setup it on 1 company in puchong which the company use nanobeam as temporary device. distance was 600m. nanobeam giving good air quality. From what I understood from the diagram you gave, the lightning arrester will protect the poe adapter and other networking devices if the nanobeam is hit by lightning but of course the nanobeam would be destroyed. What I meant in my previous post, I dont want lightning to hit the nanobeam but I used the wrong word, what I meant was lightning rod when I said lightning arrester. So, if I put a lightning rod, properly grounded above and near the nanobeam would it help to protect the nanobeam against lightning strike?surge arrestor usually put behind that protect the device not really attach on mounting beam. so, nanobeam will be expose outside.. and surge arrestor usually put behind nanobeam but not on the mounting pole |
|
|
Sep 20 2016, 08:19 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(zebrabiker @ Sep 20 2016, 07:35 PM) From what I understood from the diagram you gave, the lightning arrester will protect the poe adapter and other networking devices if the nanobeam is hit by lightning but of course the nanobeam would be destroyed. What I meant in my previous post, I dont want lightning to hit the nanobeam but I used the wrong word, what I meant was lightning rod when I said lightning arrester. So, if I put a lightning rod, properly grounded above and near the nanobeam would it help to protect the nanobeam against lightning strike? yes.... exactly... because there is must be lighting rod that will attract the lightning some anything surrounding will not get strike.. but for peace of mind... its better to have lightning arrestor to protect the device.. |
|
|
Sep 27 2016, 05:12 PM
|
Junior Member
57 posts Joined: May 2006 From: Somewhere
|
To all sifus here,
I really2 need help. I am using Ubiquiti Unifi USG Pro Gateway router, trying to connect VoIP server (I am using freepbx) to tm unifi vdsl. Voip server is 10.30.1.10 in subnet 10.30.0.0/16. From my colleague, TM VoIP is on VLAN 400. I have retrieved SIP account from modem and already put into VoIP server. If I do setting like below, my ubiquiti USG gateway will drop pppoe 2 and make it dhcp, which i will lose the internet connection. i am planning to adjust settings like this: » Click to show Spoiler - click again to hide... « |
|
|
Oct 4 2016, 01:21 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(afhm @ Sep 27 2016, 05:12 PM) To all sifus here, any full config?I really2 need help. I am using Ubiquiti Unifi USG Pro Gateway router, trying to connect VoIP server (I am using freepbx) to tm unifi vdsl. Voip server is 10.30.1.10 in subnet 10.30.0.0/16. From my colleague, TM VoIP is on VLAN 400. I have retrieved SIP account from modem and already put into VoIP server. If I do setting like below, my ubiquiti USG gateway will drop pppoe 2 and make it dhcp, which i will lose the internet connection. i am planning to adjust settings like this: » Click to show Spoiler - click again to hide... « |
|
|
Oct 9 2016, 05:47 AM
|
Junior Member
113 posts Joined: Jan 2011
|
hello. got question regarding ubiquity edgeswitch ES‑16‑XG. if buy this switch, can it connect to other switch brand through sfp+ port?
|
|
|
Oct 9 2016, 10:35 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(faizrs @ Oct 9 2016, 05:47 AM) hello. got question regarding ubiquity edgeswitch ES‑16‑XG. if buy this switch, can it connect to other switch brand through sfp+ port? It's able to support 10G sfp + shd be compatible with most switches. |
|
|
Oct 9 2016, 02:26 PM
|
|
Junior Member
113 posts Joined: Jan 2011
|
still worry a bit to buy. if I lend u my 10g transceiver to try on ubnt switch can u help me test?? or anyone?
|
|
|
Oct 10 2016, 10:30 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(faizrs @ Oct 9 2016, 02:26 PM) still worry a bit to buy. if I lend u my 10g transceiver to try on ubnt switch can u help me test?? or anyone? what is your device? we might able to check compatibility for you. |
|
|
Oct 10 2016, 01:27 PM
|
|
Junior Member
113 posts Joined: Jan 2011
|
QUOTE(pandera999 @ Oct 10 2016, 10:30 AM) what is your device? we might able to check compatibility for you. ruijie |
|
|
Oct 10 2016, 02:20 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(faizrs @ Oct 10 2016, 01:27 PM) ruijie can be more specifics?  |
|
|
Oct 10 2016, 04:38 PM
|
|
Junior Member
113 posts Joined: Jan 2011
|
M12000-16XS-DA on RG-S12000
This post has been edited by faizrs: Oct 10 2016, 04:40 PM |
|
|
Oct 10 2016, 05:22 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(faizrs @ Oct 10 2016, 04:38 PM) M12000-16XS-DA on RG-S12000 what i see there, M12000 have technical documentation saying 16 Ports 10G (SFP+) ; so, ES‑16‑XG is compatible with M12000, as the edgeswitch able to support 10G sfp+ |
|
|
Oct 10 2016, 05:38 PM
|
|
Junior Member
113 posts Joined: Jan 2011
|
QUOTE(pandera999 @ Oct 10 2016, 05:22 PM) what i see there, M12000 have technical documentation saying 16 Ports 10G (SFP+) ; so, ES‑16‑XG is compatible with M12000, as the edgeswitch able to support 10G sfp+ yes of course. but can ES‑16‑XG accept ruijie 10g transceiver/module. or may one of these module can be use on ruijie sfp+ port?  This post has been edited by faizrs: Oct 10 2016, 05:40 PM |
|
|
Oct 10 2016, 06:18 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(faizrs @ Oct 10 2016, 05:38 PM) yes of course. but can ES‑16‑XG accept ruijie 10g transceiver/module. or may one of these module can be use on ruijie sfp+ port? regarding to the forum.. they end up give comment on this matter and give other solutions. spf+ prefered than DACjust confirm with malaysia site, there is no current sfp switches available to test in malaysia site, else, i would like to test with ruijie too. |
|
|
Oct 10 2016, 06:36 PM
|
|
Junior Member
113 posts Joined: Jan 2011
|
yeah, not planning to use with dac and there are a few transceiver reported working from that thread. just interested with ES‑16‑XG for its low price compare with other 10Gb switch brand even you have to buy it from abroad. ruijie distro quote over rm60k for one 16-port expansion module. D-link also sell similar 8-port sfp+ switch but with rm19k price tag... so it's worth a look. anyway, thank you.
|
|
|
Oct 11 2016, 07:08 PM
|
|
Junior Member
21 posts Joined: May 2011
|
I'm using UAP-AC LR , from my experience sometimes the 5g radio was unstable and I had to restart the device. anyway its not a big prob.
|
|
|
Oct 11 2016, 11:01 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(kenfriend @ Oct 11 2016, 07:08 PM) I'm using UAP-AC LR , from my experience sometimes the 5g radio was unstable and I had to restart the device. anyway its not a big prob. ohh.. thanks for sharing... do you update the firmware? there is new version of controller too |
|
|
Oct 11 2016, 11:35 PM
|
|
Junior Member
21 posts Joined: May 2011
|
QUOTE(pandera999 @ Oct 11 2016, 11:01 PM) ohh.. thanks for sharing... do you update the firmware? My controller is on v.5.06 , because of the issue I recently updated the UAP firmware and hadn't encounter any issue yet. there is new version of controller too |
|
|
Oct 11 2016, 11:53 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(kenfriend @ Oct 11 2016, 11:35 PM) My controller is on v.5.06 , because of the issue I recently updated the UAP firmware and hadn't encounter any issue yet. oh i see.. thats good.. im using a PoE5, ERLite, and AC lite.. so far.. works great.. and stable... |
|
|
Oct 19 2016, 10:52 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
able to do Quad Load Balance using ER Poe5, with 2 DIfferent ISP. TM, and OHANA. its superb
|
|
|
Oct 19 2016, 11:15 AM
|
Junior Member
321 posts Joined: Apr 2006 From: Klang | Shah Alam
|
was planning to overhaul my home network, currently:
- main Archer C7 (PPoE, 2.4Ghz WDS AP, 5GHZ) - 801ndv7 2.4GHz Client WDS - 840RE 2.4GHz Client WDS First 2 running DDWRT w/QoS and some filters turned on for Access Restrictions My main pain point is coverage as I have a dead zone in my home where none of the WiFi signals can reach, even if its literraly 10steps away from the router I guess my point is this, is it worth swapping out the C7 and 801nd for ER-L and AP AC (or LR)? My main upgrade point is the security and filtering I would be able to do that is not possible with DDWRT (stuff gets broken in newer builds quite often :/ ) I could technically keep the C7 and add in ER-L > AP AC > C7 (Rebroadcast) Or is there a better way to do this? |
|
|
Oct 19 2016, 02:29 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(pizzaboyj @ Oct 19 2016, 11:15 AM) was planning to overhaul my home network, currently: ERL have 3 ports.... well.. technically.. yes, you can do in that way. no problem...- main Archer C7 (PPoE, 2.4Ghz WDS AP, 5GHZ) - 801ndv7 2.4GHz Client WDS - 840RE 2.4GHz Client WDS First 2 running DDWRT w/QoS and some filters turned on for Access Restrictions My main pain point is coverage as I have a dead zone in my home where none of the WiFi signals can reach, even if its literraly 10steps away from the router I guess my point is this, is it worth swapping out the C7 and 801nd for ER-L and AP AC (or LR)? My main upgrade point is the security and filtering I would be able to do that is not possible with DDWRT (stuff gets broken in newer builds quite often :/ ) I could technically keep the C7 and add in ER-L > AP AC > C7 (Rebroadcast) Or is there a better way to do this? |
|
|
Nov 7 2016, 10:25 AM
|
|
Junior Member
322 posts Joined: Dec 2007
|
Would an UbiQuiti setup for Unifi like this be ok?
Fiber Modem : Unifi Fiber Modem -Router : Ubiquiti Edge Router X --Switch : TS-8-PRO ---Study Room Ethernet ---Android Box 1 ---UAP-AC-LITE POE (Ground Floor) ---Android Box 2 ---UAP-AC-LITE POE (First Floor) ---CCTV DVR ---UAP-AC-LITE POE (Second Floor) Basically I want to use POE for the ceiling wireless APs, connect everything to the switch connect the switch to the router. |
|
|
Nov 7 2016, 12:10 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(kutitata @ Nov 7 2016, 10:25 AM) Would an UbiQuiti setup for Unifi like this be ok? TS-8-Pro able to provide power to the ac lite. so, no need worry bout adapter. Fiber Modem : Unifi Fiber Modem -Router : Ubiquiti Edge Router X --Switch : TS-8-PRO ---Study Room Ethernet ---Android Box 1 ---UAP-AC-LITE POE (Ground Floor) ---Android Box 2 ---UAP-AC-LITE POE (First Floor) ---CCTV DVR ---UAP-AC-LITE POE (Second Floor) Basically I want to use POE for the ceiling wireless APs, connect everything to the switch connect the switch to the router. the setup looks good. fiber modem -> ERX -> TS-8-Pro -> CCTV DVR + 3 x AC Lite |
|
|
Nov 7 2016, 03:02 PM
|
|
Junior Member
322 posts Joined: Dec 2007
|
QUOTE(pandera999 @ Nov 7 2016, 12:10 PM) TS-8-Pro able to provide power to the ac lite. so, no need worry bout adapter. The Android box also using wired connection. So total 7 connections to the TS-8-Pro.the setup looks good. fiber modem -> ERX -> TS-8-Pro -> CCTV DVR + 3 x AC Lite For CCTV and android box using existing cat5e cables but for study room and AC Lite x 3 using cat6. Can such a setup support Hypp TV? I plan to house the ERX and TS-8-Pro in the DB closet as that is the location the Unifi fiber terminates and also all the existing cat5e cabling. Does the ERX and TS-8-Pro need aircon? hopefully not  What is the range of the AC Lite in normal malaysian concrete and brick house? I plan to install them in front of stairwell to maximize clear distances to users/clients. Can you provide a quote to supply and install including setup? I will run the cables myself. Would also need somesort of rack that can house the fiber modem, ERX and TS-Pro  |
|
|
Nov 7 2016, 03:47 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(kutitata @ Nov 7 2016, 03:02 PM) The Android box also using wired connection. So total 7 connections to the TS-8-Pro. cat6 only for outdoor. why you need use outdoor cable for indoor device. For CCTV and android box using existing cat5e cables but for study room and AC Lite x 3 using cat6. Can such a setup support Hypp TV? I plan to house the ERX and TS-8-Pro in the DB closet as that is the location the Unifi fiber terminates and also all the existing cat5e cabling. Does the ERX and TS-8-Pro need aircon? hopefully not What is the range of the AC Lite in normal malaysian concrete and brick house? I plan to install them in front of stairwell to maximize clear distances to users/clients. Can you provide a quote to supply and install including setup? I will run the cables myself. Would also need somesort of rack that can house the fiber modem, ERX and TS-Pro too rich? yes, can setup hypp tv.. u using tm right. since tm using vlan tagging, i think it will works.. never try personally using hyppTv. i might request for decoder for hypptv from tm to try it out.. only hypptv i cant guarantee but for others, yes. no issue. even using OHANA ISP as well... running quad load balancing with no issue... with 3 different ISP. AC lite is 25% smaller than the standard UniFi AP with range 122m (400 ft). but of course, concrete and brick house is the real obstacle. normally, if thick wall and want to save cost, AC LR will be the best option. do you running some kind of hostel? i will ask my friend to you. if you want proper quote, pm me your name, hp num and address. I just running some this subs forum and discussion, for sales / quotation, i just helping her its directly import from US. so, they are not 3rd party. kinda master reseller i think |
|
|
Nov 7 2016, 04:08 PM
|
|
Junior Member
322 posts Joined: Dec 2007
|
QUOTE(pandera999 @ Nov 7 2016, 03:47 PM) cat6 only for outdoor. why you need use outdoor cable for indoor device. 1. I running Cat6 for HDMI so might as well use the same for the new cables too rich? yes, can setup hypp tv.. u using tm right. since tm using vlan tagging, i think it will works.. never try personally using hyppTv. i might request for decoder for hypptv from tm to try it out.. only hypptv i cant guarantee but for others, yes. no issue. even using OHANA ISP as well... running quad load balancing with no issue... with 3 different ISP. AC lite is 25% smaller than the standard UniFi AP with range 122m (400 ft). but of course, concrete and brick house is the real obstacle. normally, if thick wall and want to save cost, AC LR will be the best option. do you running some kind of hostel? i will ask my friend to you. if you want proper quote, pm me your name, hp num and address. I just running some this subs forum and discussion, for sales / quotation, i just helping her its directly import from US. so, they are not 3rd party. kinda master reseller i think 2. so better to use AC LR 3. this is for a house lar, not hostel, but it is a three generation house so plenty of users, plenty of devices, so many streaming and what not, I want it to be reliable, and fast! |
|
|
Nov 7 2016, 04:54 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(kutitata @ Nov 7 2016, 04:08 PM) 1. I running Cat6 for HDMI so might as well use the same for the new cables they tell me.2. so better to use AC LR 3. this is for a house lar, not hostel, but it is a three generation house so plenty of users, plenty of devices, so many streaming and what not, I want it to be reliable, and fast! QUOTE They dont configure hypptv and android box and not selling cctv dvr. cat6 for hdmi... ohh.. ok.... |
|
|
 Nov 10 2016, 02:16 AM
|
Junior Member
117 posts Joined: Feb 2008 From: Ampang
|
Hi Bro... I'm planning to use this kind of setup for gaming / etc...
01.Router Z (192.168.1.1) connected to 1 ubiquiti AP (LBE-5ac-16-120) 02.1 Ubiquiti CPE I (LBE-5AC-23) at my friend house and connected to 1 of his LAN port router (A). 03.1 Ubiquiti CPE II (LBE-5AC-23) at my other friend house and connected to 1 of his LAN port router (B). * CPE I & II connected to ubiquiti AP * Router A & B will have different IP / Pool ... (192.168.2.X) & (192.168.3.X).. some question :- is it possible that people from router A & B communicate to each other and also communicate to (192.168.1.X)? ... can ubiquiti cater this kind of setup automatically via their route table?... or need to do static route via main router Z? * Do the setup as above can be troublesome? * Do you think the setup above expensive or it's value for money? * How much roughly the cheapest total cost of 1 AP (LBE-5ac-16-120) & 2 (LBE-5AC-23)? * Off Topic question, how good are the CPE tested indoor? .. example connecting 2 23dbi (ptp) across a few houses, does the wave can penatrate to few houses with straight indoor line for 300 meter and still can get good reception?.. this is a experimental question if perhaps someone / seller have done some experiment with this equipment.. P/S : Actually I'm planning budget for own cheap project with gaming friend related to networking / Streaming HD|4K & Gaming using product above... |
|
|
Nov 10 2016, 11:05 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(liquid.D @ Nov 10 2016, 02:16 AM) Hi Bro... I'm planning to use this kind of setup for gaming / etc... 01.Router Z (192.168.1.1) connected to 1 ubiquiti AP (LBE-5ac-16-120) 02.1 Ubiquiti CPE I (LBE-5AC-23) at my friend house and connected to 1 of his LAN port router (A). 03.1 Ubiquiti CPE II (LBE-5AC-23) at my other friend house and connected to 1 of his LAN port router (B). * CPE I & II connected to ubiquiti AP * Router A & B will have different IP / Pool ... (192.168.2.X) & (192.168.3.X).. some question :- is it possible that people from router A & B communicate to each other and also communicate to (192.168.1.X)? ... can ubiquiti cater this kind of setup automatically via their route table?... or need to do static route via main router Z? * Do the setup as above can be troublesome? * Do you think the setup above expensive or it's value for money? * How much roughly the cheapest total cost of 1 AP (LBE-5ac-16-120) & 2 (LBE-5AC-23)? * Off Topic question, how good are the CPE tested indoor? .. example connecting 2 23dbi (ptp) across a few houses, does the wave can penatrate to few houses with straight indoor line for 300 meter and still can get good reception?.. this is a experimental question if perhaps someone / seller have done some experiment with this equipment.. P/S : Actually I'm planning budget for own cheap project with gaming friend related to networking / Streaming HD|4K & Gaming using product above... » Click to show Spoiler - click again to hide... « so, your network diagram will look like as above right. good for me, no problem. Yes, it is still possible for you to make that IP config. I think its value for money. you had to provide internet bandwith and paid by sharing. while the hardware is one time paid instead monthly paid for the internet. as for me, its value for money. LBE-5ac-16-120 around rm470 per unit LBE-5AC-23 around rm360 per unit wave penetrate the house.. then the signal slowly become weak. its better if it does not need interference... then can enjoy full speed. but even if its indoor, the alignment need to be done properly.. I'd suggest you mount it as high as possible to get clear line of sight otherwise you will face issue. cheap project, cost more than 1k? the router you use, need to be consider as well. as long as it support big bandwith, then streaming and gaming on 4k will be not an issue. |
|
|
Nov 10 2016, 01:07 PM
|
|
Junior Member
117 posts Joined: Feb 2008 From: Ampang
|
QUOTE(pandera999 @ Nov 10 2016, 11:05 AM) » Click to show Spoiler - click again to hide... « so, your network diagram will look like as above right. good for me, no problem. Yes, it is still possible for you to make that IP config. I think its value for money. you had to provide internet bandwith and paid by sharing. while the hardware is one time paid instead monthly paid for the internet. as for me, its value for money. LBE-5ac-16-120 around rm470 per unit LBE-5AC-23 around rm360 per unit wave penetrate the house.. then the signal slowly become weak. its better if it does not need interference... then can enjoy full speed. but even if its indoor, the alignment need to be done properly.. I'd suggest you mount it as high as possible to get clear line of sight otherwise you will face issue. cheap project, cost more than 1k? the router you use, need to be consider as well. as long as it support big bandwith, then streaming and gaming on 4k will be not an issue. |
|
|
Nov 10 2016, 02:02 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(liquid.D @ Nov 10 2016, 01:07 PM) Look Nice... May I know LBE-5AC-23 around rm360 per unit <- This 1 also can do ptp with 2 unit directly connected via bridge (80Mhz Bandwidth) Right? ... You Have this stock? I think the price around that... I dont sell it, my friend does. Need check with him too. I just helping him open the thread only. and if any request, i will pass over to her. She order it from US directly. so, probably there is price different. Depends with current MYR rate.yes. it can do ptp.. she still waiting new order to arrive. if you want, i can pass your message to her. |
|
|
 Nov 10 2016, 02:28 PM
|
|
Junior Member
117 posts Joined: Feb 2008 From: Ampang
|
QUOTE(pandera999 @ Nov 10 2016, 02:02 PM) I think the price around that... I dont sell it, my friend does. Need check with him too. I just helping him open the thread only. and if any request, i will pass over to her. She order it from US directly. so, probably there is price different. Depends with current MYR rate. Yup I'm looking for that kind of device, it's also "awaiting stock" status from another supplier in KL (I live near KL) so I'm finding other place that currently have LBE-5AC-23 stock and have easy access for warranty... perhaps you can forward to your friend and also how fast did the stock will arrive if she have ETA is better, I also would like to know the rate if I take more than 1 device, and also need to know location of him/her shop incase him/her stock is arriving faster than other vendor.. for LBE-5ac-16-120 unit it's in stock according to another vendor with slight different in price, I'm thinking to buy in bundle so that our "Network gaming / Sharing" project Price & warranty are well suited and easier to kick-start the project when all the necessary equipment are ready and accessible... yes. it can do ptp.. she still waiting new order to arrive. if you want, i can pass your message to her.  P/S : If his/her shop are around Selangor / KL then it's better option.  This post has been edited by liquid.D: Nov 10 2016, 02:29 PM |
|
|
Nov 10 2016, 02:58 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(liquid.D @ Nov 10 2016, 02:28 PM) Yup I'm looking for that kind of device, it's also "awaiting stock" status from another supplier in KL (I live near KL) so I'm finding other place that currently have LBE-5AC-23 stock and have easy access for warranty... perhaps you can forward to your friend and also how fast did the stock will arrive if she have ETA is better, I also would like to know the rate if I take more than 1 device, and also need to know location of him/her shop incase him/her stock is arriving faster than other vendor.. for LBE-5ac-16-120 unit it's in stock according to another vendor with slight different in price, I'm thinking to buy in bundle so that our "Network gaming / Sharing" project Price & warranty are well suited and easier to kick-start the project when all the necessary equipment are ready and accessible... its at subang jaya there. empire gallery. if you really want, then can confirm with me. because, around 10 units order only. you can check my signature. address and contact num. just that, this stock kinda hard to get and its limit this few months. quite long she wait for the stocks. P/S : If his/her shop are around Selangor / KL then it's better option. cz i need some unit for review and testing. i borrow from her as well. |
|
|
Nov 10 2016, 07:33 PM
|
|
Junior Member
117 posts Joined: Feb 2008 From: Ampang
|
QUOTE(pandera999 @ Nov 10 2016, 02:58 PM) its at subang jaya there. empire gallery. if you really want, then can confirm with me. because, around 10 units order only. you can check my signature. address and contact num. just that, this stock kinda hard to get and its limit this few months. quite long she wait for the stocks. Haha yeah the one in KL also sold out 30 already of that stuff.. so once the things landed have to grab hehe... btw I've just PM you on extra info I would like to know because I'm not really familiar, there are so much ubiquiti product and look alike hehe (but different speed / wave / use application) cz i need some unit for review and testing. i borrow from her as well.  ... and another one "ETH-SP Ubiquiti Outdoor Gigabit Ethernet Surge Protector" I'm not sure it's applied to all outdoor product or only power beam product... hehehe....  Perhaps u can try get extra Lyn discount with your best-friend  ... hehehe ************************************************************************************************* By the way suddenly I've think of another 1 configuration, not sure if this configuration are better in-term of performance and CPE Placing, but seems this configuration might add additional 200+ extra (this is just draft - because it's adding on additional cable $$ and CPE $$  .. hehehe Configuration as below :- 01.Router Z (192.168.1.1) connected to 2 CPE(LBE-5AC-23) through 2 of the router GigaLAN port (CPE III & CPE IV) 02. CPE III Will point (ptp) to CPE I as Below (bandwidth 80Mhz - Full Throttle). 03.1 Ubiquiti CPE I (LBE-5AC-23) at my friend house and connected to 1 of his LAN port router (A). 04. CPE IV Will point (ptp) to CPE II as Below (bandwidth 80Mhz - Full Throttle). 05.1 Ubiquiti CPE II (LBE-5AC-23) at my other friend house and connected to 1 of his LAN port router (B). * I think the CPE I,II,III,IV will have their own static IP same subnet IP range as Router Z (192.168.1.X) * Router A & B will have different IP / Pool ... (192.168.2.X) & (192.168.3.X).. P/S: Not Sure if this configuration will need more setting / static routing ... because from router A to router B will have to go through CPE Static IP .. Scenario From "Router A to Router B" the path will have to route like this ... (CPE I -> CPE III -> Router (Z) -> CPE IV -> CPE II) ... but from the throughput seems faster (in-theory) as dedicated bridge (80Mhz) and dedicated Gigabit Ethernet for both that connected to Router (Z)... but extra $$$ and maintenance as both pair should be configured & tuned ... not sure if Router A & router B static route table need to be be alter much... I guess Router Z is the one that need to do all that routing static Ip metric job... Just Theory.. hihihi.... by the way do you think the CPE need to be configure it's static route from router A.. to Router Z? This post has been edited by liquid.D: Nov 10 2016, 08:08 PM |
|
|
Nov 10 2016, 10:28 PM
|
Senior Member
1,040 posts Joined: Oct 2004 From: the other side
|
QUOTE(liquid.D @ Nov 10 2016, 07:33 PM) Haha yeah the one in KL also sold out 30 already of that stuff.. so once the things landed have to grab hehe... btw I've just PM you on extra info I would like to know because I'm not really familiar, there are so much ubiquiti product and look alike hehe (but different speed / wave / use application) 1. Regarding subnet, if you need everyone to see each other, better put everyone within the same subnet. Your router Z will be the only DHCP server in the network. You won't exhaust all the IPs. All AP and CPE should have static IP. ... and another one "ETH-SP Ubiquiti Outdoor Gigabit Ethernet Surge Protector" I'm not sure it's applied to all outdoor product or only power beam product... hehehe.... Perhaps u can try get extra Lyn discount with your best-friend ... hehehe ************************************************************************************************* By the way suddenly I've think of another 1 configuration, not sure if this configuration are better in-term of performance and CPE Placing, but seems this configuration might add additional 200+ extra (this is just draft - because it's adding on additional cable $$ and CPE $$ .. hehehe Configuration as below :- 01.Router Z (192.168.1.1) connected to 2 CPE(LBE-5AC-23) through 2 of the router GigaLAN port (CPE III & CPE IV) 02. CPE III Will point (ptp) to CPE I as Below (bandwidth 80Mhz - Full Throttle). 03.1 Ubiquiti CPE I (LBE-5AC-23) at my friend house and connected to 1 of his LAN port router (A). 04. CPE IV Will point (ptp) to CPE II as Below (bandwidth 80Mhz - Full Throttle). 05.1 Ubiquiti CPE II (LBE-5AC-23) at my other friend house and connected to 1 of his LAN port router (B). * I think the CPE I,II,III,IV will have their own static IP same subnet IP range as Router Z (192.168.1.X) * Router A & B will have different IP / Pool ... (192.168.2.X) & (192.168.3.X).. P/S: Not Sure if this configuration will need more setting / static routing ... because from router A to router B will have to go through CPE Static IP .. Scenario From "Router A to Router B" the path will have to route like this ... (CPE I -> CPE III -> Router (Z) -> CPE IV -> CPE II) ... but from the throughput seems faster (in-theory) as dedicated bridge (80Mhz) and dedicated Gigabit Ethernet for both that connected to Router (Z)... but extra $$$ and maintenance as both pair should be configured & tuned ... not sure if Router A & router B static route table need to be be alter much... I guess Router Z is the one that need to do all that routing static Ip metric job... Just Theory.. hihihi.... by the way do you think the CPE need to be configure it's static route from router A.. to Router Z? 2. To answer which setup provide best performance and value i need to know a few things: - Do both of your friend houses located within 120º from your house? - Do you have line of sight of both houses? - How much throughput would you think is good enough for your network? |
|
|
Nov 10 2016, 10:36 PM
|
|
Senior Member
1,040 posts Joined: Oct 2004 From: the other side
|
QUOTE(kutitata @ Nov 7 2016, 04:08 PM) 1. I running Cat6 for HDMI so might as well use the same for the new cables If the floor is too big, it's much better to use 2 AP than 1 LR AP.2. so better to use AC LR 3. this is for a house lar, not hostel, but it is a three generation house so plenty of users, plenty of devices, so many streaming and what not, I want it to be reliable, and fast! |
|
|
Nov 11 2016, 11:41 AM
|
|
Junior Member
117 posts Joined: Feb 2008 From: Ampang
|
QUOTE(irwan6179 @ Nov 10 2016, 10:28 PM) 1. Regarding subnet, if you need everyone to see each other, better put everyone within the same subnet. Your router Z will be the only DHCP server in the network. You won't exhaust all the IPs. All AP and CPE should have static IP. I see... that Interesting, if let say the people from Router A or Router B wanna have their mix internet connection, for example 1 of my friend already subscribe / use screamyx(with phone bundle) and with this project(because only he's sharing the cost in that house), so he wanted to know if his network (let say router B) wanna have his own DHCP supplying the router own IP address (perhaps same or different subnet).. but only his (laptop/desktop/handphone/xbox/ps4) have static IP that pointing to Router Z directly... so that his screamyx still there serving other in his house... and the house will only use single router... only he know that he is routing his packet towards ubiquiti CPE II -> CPE IV -> Router Z...2. To answer which setup provide best performance and value i need to know a few things: - Do both of your friend houses located within 120º from your house? - Do you have line of sight of both houses? - How much throughput would you think is good enough for your network? I'm not sure if the above scenario can be apply with ubiquiti AP + CPE (option to block DHCP spill over) ... maybe Router Z need to maintain static route of both destination / DHCP of some sort... ... quite challenging to think of the scenario .... Btw all router in hand currently are Aztech FG7008GR(AC),tp-dlink,d-link.. I read somewhere that OSPF are very good for mapping route dynamically, but I think I read that "OSPF option" not available on ubiquiti "router line".. is it correct?... I try to avoid using software router (pfsense) using mini-its intel J3060 (6W) .. hehe on paper it might have many router functionality matching enterprise router, try to avoid extra cost there... Btw based on your question.. : I guess both of my friend located around the 120º area just that their distance are different (perhaps around range 100º - 110º).. quite at the edge of sector antenna beam angle.. need to fine-tune AP for nice signal coverage... hehe, my current target are can be able to play game... shared file.. and also "4K streaming" .. "4K streaming" might tax the network a lot... but not sure how practical.. because all of us will have our own shared file location on each router, we just shared our FTP / shared folder to each other... hehehe for both house it's not so line of sight ... means I know the location of their house are.. but perhaps 2 - 3 obstacle before the signal reach them .. btw their house are less than 1 KM from mine.. This post has been edited by liquid.D: Nov 11 2016, 11:53 AM |
|
|
Nov 11 2016, 12:02 PM
|
Junior Member
177 posts Joined: Sep 2006
|
u don't need ospf. ur network too small. waste processor usage only.
static route is enough |
|
|
Nov 11 2016, 12:33 PM
|
|
Senior Member
1,040 posts Joined: Oct 2004 From: the other side
|
QUOTE(liquid.D @ Nov 11 2016, 11:41 AM) I see... that Interesting, if let say the people from Router A or Router B wanna have their mix internet connection, for example 1 of my friend already subscribe / use screamyx(with phone bundle) and with this project(because only he's sharing the cost in that house), so he wanted to know if his network (let say router B) wanna have his own DHCP supplying the router own IP address (perhaps same or different subnet).. but only his (laptop/desktop/handphone/xbox/ps4) have static IP that pointing to Router Z directly... so that his screamyx still there serving other in his house... and the house will only use single router... only he know that he is routing his packet towards ubiquiti CPE II -> CPE IV -> Router Z... Without line of sight, closing to 1km distance, I think it's nearly impossible. When you say 1 or 2 obstacles, is it a tree or a building? I'm not sure if the above scenario can be apply with ubiquiti AP + CPE (option to block DHCP spill over) ... maybe Router Z need to maintain static route of both destination / DHCP of some sort... ... quite challenging to think of the scenario .... Btw all router in hand currently are Aztech FG7008GR(AC),tp-dlink,d-link.. I read somewhere that OSPF are very good for mapping route dynamically, but I think I read that "OSPF option" not available on ubiquiti "router line".. is it correct?... I try to avoid using software router (pfsense) using mini-its intel J3060 (6W) .. hehe on paper it might have many router functionality matching enterprise router, try to avoid extra cost there... Btw based on your question.. : I guess both of my friend located around the 120º area just that their distance are different (perhaps around range 100º - 110º).. quite at the edge of sector antenna beam angle.. need to fine-tune AP for nice signal coverage... hehe, my current target are can be able to play game... shared file.. and also "4K streaming" .. "4K streaming" might tax the network a lot... but not sure how practical.. because all of us will have our own shared file location on each router, we just shared our FTP / shared folder to each other... hehehe for both house it's not so line of sight ... means I know the location of their house are.. but perhaps 2 - 3 obstacle before the signal reach them .. btw their house are less than 1 KM from mine.. 4k streaming can be 5mbps can be 20mbps. If got line of sight I think can achieve 100+mbps. Currently I'm using a pair of nanobeam ac at 200meter line of sight. It max and quite stable at 350mbps. You don't have to worry about existing streamyx, let others use that wifi and let your friend use your network on another AP(using existing in hand routers) . No need to complicate stuff. This post has been edited by irwan6179: Nov 11 2016, 12:37 PM |
|
|
Nov 11 2016, 04:50 PM
|
|
Junior Member
117 posts Joined: Feb 2008 From: Ampang
|
QUOTE(eastherd @ Nov 11 2016, 12:02 PM) u don't need ospf. ur network too small. waste processor usage only. Noted thanks eastherd, may I know if static route can be use on all kind of router? I means, not many router that have many options.. not sure if static route are standard function, because I think static route need to be maintain on all router that have different subnet so that they can talk to each other right. static route is enough |
|
|
Nov 11 2016, 04:56 PM
|
|
Junior Member
177 posts Joined: Sep 2006
|
static route is the basic routing function. Let say default route should be pointed to TM/TIME/Maxis router. That is static routing.
OSPF is more into dynamic routing. More suitable in enterprise when u have multi path links. If can forward traffics base on best path can failover. If you have only 1 path, there's no point using dynamic routing. |
|
|
Nov 11 2016, 05:10 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(liquid.D @ Nov 11 2016, 04:50 PM) Noted thanks eastherd, may I know if static route can be use on all kind of router? I means, not many router that have many options.. not sure if static route are standard function, because I think static route need to be maintain on all router that have different subnet so that they can talk to each other right. its better to have simple route. dont make it complex. so, can troubleshoot it easily if there is some error |
|
|
Nov 14 2016, 10:07 AM
|
Junior Member
23 posts Joined: Feb 2009
|
Hi, i am look for access point to extend my factory Wireless signal, currently i am using Streamyx 4MB. Any suggestion on which wireless AP to use ?
Currently my setting for wireless AP is Tp-Link WA830RE somehow i felt the wireless signal is not strong enough at some spot. This post has been edited by fairypark: Nov 14 2016, 10:08 AM |
|
|
Nov 14 2016, 10:21 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(fairypark @ Nov 14 2016, 10:07 AM) Hi, i am look for access point to extend my factory Wireless signal, currently i am using Streamyx 4MB. Any suggestion on which wireless AP to use ? You need wireless to cover a particular area or need cover all the factory floor? Wireless signal is not strong at some spot due to distance?Currently my setting for wireless AP is Tp-Link WA830RE somehow i felt the wireless signal is not strong enough at some spot. |
|
|
 Nov 14 2016, 06:39 PM
|
|
Junior Member
117 posts Joined: Feb 2008 From: Ampang
|
QUOTE(pandera999 @ Nov 11 2016, 05:10 PM) its better to have simple route. dont make it complex. so, can troubleshoot it easily if there is some error Yea Bro perhaps that the easiest way right, really keen to have setup network for gaming with lowest ping possible... hehe ... |
|
|
Nov 15 2016, 08:40 AM
|
Junior Member
260 posts Joined: Oct 2007
|
Hi,
May I know how is the capability of AC LR model for 2 semi D house with just for Wifi hotspot purpose? There are quick numbers of edge of wall due to re-construct it 2 in 1....or any proposal? Planned to use TM Unifi modem and connect to one Wifi router as hotspot... |
|
|
Nov 15 2016, 09:27 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(eprince @ Nov 15 2016, 08:40 AM) Hi, unifi internet speed, its better use ac lr + now its end cycle of uap lr. May I know how is the capability of AC LR model for 2 semi D house with just for Wifi hotspot purpose? There are quick numbers of edge of wall due to re-construct it 2 in 1....or any proposal? Planned to use TM Unifi modem and connect to one Wifi router as hotspot... uap lr and uap ac lr range is the same at 183m (600 ft). But AC LR able to run simultaneous band. and have 5Ghz frequency. while uap lr only have 2.4Ghz Speed and Range values may vary and are based on optimal environments.. |
|
|
Nov 15 2016, 11:04 AM
|
|
Junior Member
260 posts Joined: Oct 2007
|
QUOTE(pandera999 @ Nov 15 2016, 09:27 AM) unifi internet speed, its better use ac lr + now its end cycle of uap lr. Do you think its sufficient to fully covered 2 semiD house with total build up area 60 x 70ft?uap lr and uap ac lr range is the same at 183m (600 ft). But AC LR able to run simultaneous band. and have 5Ghz frequency. while uap lr only have 2.4Ghz Speed and Range values may vary and are based on optimal environments.. Can you provide me model and price for the wireless router? thanks. |
|
|
Nov 15 2016, 01:46 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(eprince @ Nov 15 2016, 11:04 AM) Do you think its sufficient to fully covered 2 semiD house with total build up area 60 x 70ft? 1 unit for each semiD? based on my exp, 2 unit per semiD at least. then able cover all floor. + position also influence the signalCan you provide me model and price for the wireless router? thanks. |
|
|
Dec 20 2016, 03:00 PM
|
|
Junior Member
322 posts Joined: Dec 2007
|
any company that can set up configure ubiquiti devices for unifi?
|
|
|
Dec 20 2016, 03:17 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(kutitata @ Dec 20 2016, 03:00 PM) any company that can set up configure ubiquiti devices for unifi? you can check the details on on first page. or check master reseller on ubnt website |
|
|
Dec 20 2016, 05:42 PM
|
|
Junior Member
322 posts Joined: Dec 2007
|
QUOTE(goolias @ Aug 6 2016, 09:34 PM) Am using UNIFI AP, and Unifi AP-LR series. what router are you using?Nice thin client AP with controller, best of all license if free for controller software. Overall, controller features aren't impressive but suitable for average SME business and cafe environment usage. One thing cool compare to average home AP like TPlink, I have been switching on the unit for months, still running stable. |
|
|
Dec 20 2016, 05:47 PM
|
|
Junior Member
322 posts Joined: Dec 2007
|
QUOTE(jio @ Aug 2 2016, 07:04 PM) For home user that thinking of getting ER-L, I suggest get ER-X instead. ER-L ideally paired with switches & ER-L only will be fast if you use the hardware offloading feature. You can get ER-X for half the price of ER-L. Anything that require CPU such as QoS or VPN, ER-X will be fine (2x880MHz MIPS32 vs 2x500MHz MIPS64 of ER-L). ER-X does have per port VLAN tagging & some basic HW offloading features added in latest firmware. How about if ER-L paired with TS-8 to drive 3 AP AC (LR)?Does ER-L have real advantage over ER-X? |
|
|
Dec 20 2016, 06:43 PM
|
|
Junior Member
383 posts Joined: May 2005
|
QUOTE(kutitata @ Dec 20 2016, 05:47 PM) How about if ER-L paired with TS-8 to drive 3 AP AC (LR)? Then you might as well use ERPoe-5 if you only need 3 POE ports. If you only need the POE output, TS-8 is abit under utilised. Unless you thinking of getting 5 pack.Does ER-L have real advantage over ER-X? The main advantage of ER-L over ER-X is due to routing performance between networks (multiple subnet or VLAN) plus some other hardware acceleration/offload such as IPSec hw acceleration (ER-X also had this but slower). If you want to use it for non hw accelerated function such as QoS or OpenVPN, it will actually be slower than ER-X in that particular task. But I recommend Mikrotik hEX R3 (similar processor as ER-X & can run Dude server) over ER-X unless you need full OpenVPN server or other features in EdgeOS not available in RouterOS. Mikrotik hEX POE is good low budget choice with POE 802.3at support, the CPU is slower than hEX R3 & ER-X, but still pretty decent. This post has been edited by jio: Dec 20 2016, 06:54 PM |
|
|
Dec 21 2016, 11:09 AM
|
|
Junior Member
27 posts Joined: Mar 2007
|
Hi, please quote me your best price for Edgerouter Lite include postage to sabah.
Thanks. |
|
|
Dec 26 2016, 04:06 PM
|
|
Junior Member
322 posts Joined: Dec 2007
|
QUOTE(jio @ Dec 20 2016, 06:43 PM) Then you might as well use ERPoe-5 if you only need 3 POE ports. If you only need the POE output, TS-8 is abit under utilised. Unless you thinking of getting 5 pack. the set up is for home use:-The main advantage of ER-L over ER-X is due to routing performance between networks (multiple subnet or VLAN) plus some other hardware acceleration/offload such as IPSec hw acceleration (ER-X also had this but slower). If you want to use it for non hw accelerated function such as QoS or OpenVPN, it will actually be slower than ER-X in that particular task. But I recommend Mikrotik hEX R3 (similar processor as ER-X & can run Dude server) over ER-X unless you need full OpenVPN server or other features in EdgeOS not available in RouterOS. Mikrotik hEX POE is good low budget choice with POE 802.3at support, the CPU is slower than hEX R3 & ER-X, but still pretty decent. Unifi Fiber Modem -ER-X --Desktop --Desktop --TS-8 ---Android Box 1 ---UAP‑AC‑LR 1 ---Android Box 2 ---UAP‑AC‑LR 2 ---CCTV DVR ---UAP‑AC‑LR 3 ---Desktop I am not sure whether I need those extra features or not I am looking to get the best experience and reliability based for unifi |
|
|
Dec 26 2016, 06:50 PM
|
Junior Member
677 posts Joined: Apr 2008
|
Hey guys, i have made a tutorial for setting up edge router with unifi or maxis with iptv. Hope it helps. Cheers
|
|
|
Dec 26 2016, 07:58 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Dec 26 2016, 06:50 PM) Hey guys, i have made a tutorial for setting up edge router with unifi or maxis with iptv. Hope it helps. Cheers  wow... amazing.... never tried it.... works so far? |
|
|
Dec 26 2016, 10:29 PM
Show posts by this member only | IPv6 | Post
#118
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(pandera999 @ Dec 26 2016, 07:58 PM) wow... amazing.... never tried it.... works so far? |
|
|
Dec 27 2016, 12:39 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Dec 26 2016, 10:29 PM) Yup, been using it for months now. Helped a few forumers here too. I have been getting a lot of request. So i decided to post it to the public so everyone will be able to set up theirs easy. thats great... i never had chance to try it.. even i have unifi. Since im always away totally no chance to try.. are you blogging? |
|
|
Dec 27 2016, 10:21 AM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(pandera999 @ Dec 27 2016, 12:39 AM) thats great... i never had chance to try it.. even i have unifi. Since im always away totally no chance to try.. are you blogging? No i have not, blog does sound like a good idea. Im no expert, but im gonna try to setup my own web server soon, who knows. Always away huh, sounds like u have a better life than i do. Btw back to the topic, u can give it a try sooner or later. Its more like a 15mins setup for a first timer. Its only click click n done. CheersThis post has been edited by wanttotree: Dec 27 2016, 10:24 AM |
|
|
Dec 27 2016, 12:25 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Dec 27 2016, 10:21 AM) No i have not, blog does sound like a good idea. Im no expert, but im gonna try to setup my own web server soon, who knows. Always away huh, sounds like u have a better life than i do. Btw back to the topic, u can give it a try sooner or later. Its more like a 15mins setup for a first timer. Its only click click n done. Cheers not better life, but travel all the time. having meetings. oh, does it using vlan tagging to set iptv? |
|
|
Dec 27 2016, 08:23 PM
Show posts by this member only | IPv6 | Post
#122
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(pandera999 @ Dec 27 2016, 12:25 PM) not better life, but travel all the time. having meetings. Yes it does bro. Can set it up easily. Ur using one are u?oh, does it using vlan tagging to set iptv? |
|
|
Dec 27 2016, 10:34 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Dec 27 2016, 08:23 PM) Yes it does bro. Can set it up easily. Ur using one are u? using ERlite, poe5, ES switch, unifi Switch, AP's too... im using quad load balancer on ERpoe5... its running stable so far.. and much user friendly than cisco.. + the license free |
|
|
Dec 28 2016, 09:45 AM
Show posts by this member only | IPv6 | Post
#124
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(pandera999 @ Dec 27 2016, 10:34 PM) using ERlite, poe5, ES switch, unifi Switch, AP's too... im using quad load balancer on ERpoe5... its running stable so far.. and much user friendly than cisco.. + the license free Nice. Those are full on ubiquiti man. How is the performance using wan through all 4 wans? Does it go through the switch chip or straight to cpu? i always wonder. Btw whats your isp? 4 diff ones?This post has been edited by wanttotree: Dec 28 2016, 09:45 AM |
|
|
Dec 28 2016, 11:37 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Dec 28 2016, 09:45 AM) Nice. Those are full on ubiquiti man. How is the performance using wan through all 4 wans? Does it go through the switch chip or straight to cpu? i always wonder. Btw whats your isp? 4 diff ones? so far stable and good performance; not doing fail over. as I need big bandwidth. the wans straight to cpu then switch. Yes, 2 Different ISP, Ohana and TM Unifi. 2 WAN each. so total 4.. |
|
|
Dec 28 2016, 02:42 PM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(pandera999 @ Dec 28 2016, 11:37 AM) so far stable and good performance; not doing fail over. as I need big bandwidth. the wans straight to cpu then switch. Yes, 2 Different ISP, Ohana and TM Unifi. 2 WAN each. so total 4.. so im guessing ur doing 100mbps each? nice setup and that er-poe potential is scratched almost half way. must be a big number of users in yr place. are u in any chance running a server/s behind that router? maybe a good ol vpn? =) |
|
|
Dec 28 2016, 03:04 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Dec 28 2016, 02:42 PM) so im guessing ur doing 100mbps each? nice setup and that er-poe potential is scratched almost half way. must be a big number of users in yr place. are u in any chance running a server/s behind that router? maybe a good ol vpn? =) yes.. because, around my area are 2 restaurant, 1 office and 1 mini hotel. so i provide service for them. yes, there are running servers + cctv.vpn currently down... few months back it was good but then, after i setup quad wans balancing, vpn also down even the setup is good but it still mystery. |
|
|
Dec 28 2016, 03:38 PM
Show posts by this member only | IPv6 | Post
#128
|
|
Junior Member
677 posts Joined: Apr 2008
|
may i know if if u run vpn on the router or dedicated server? Its a known issue for running vpn server on edgerouter using multi wan.
|
|
|
Dec 28 2016, 06:14 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Dec 28 2016, 03:38 PM) may i know if if u run vpn on the router or dedicated server? Its a known issue for running vpn server on edgerouter using multi wan. vpn run on the router. its not a known issue... probably some bugs... especially port forwarding issue... if running on multi wan. for sure have difficult times handling port forwarding. over than 5 port forwarding will cause u headache. i guess, there is limitation for a router than real load balancer. |
|
|
Dec 28 2016, 07:43 PM
Show posts by this member only | IPv6 | Post
#130
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(pandera999 @ Dec 28 2016, 06:14 PM) vpn run on the router. its not a known issue... probably some bugs... especially port forwarding issue... if running on multi wan. for sure have difficult times handling port forwarding. over than 5 port forwarding will cause u headache. i guess, there is limitation for a router than real load balancer. Yea i agree. I wouldnt use a built in vpn in your case. Port forwarding is a headache? Is it like a bug issue? Yea there are a few some bugs needed ironing on edgerouter. In my case, i need l2tp client interface which is non existence.i guess its a waiting game. Anyway, since there are many clients connected to yr system, are u segmenting them via vlan? How did u do yours? |
|
|
Dec 29 2016, 02:00 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Dec 28 2016, 07:43 PM) Yea i agree. I wouldnt use a built in vpn in your case. Port forwarding is a headache? Is it like a bug issue? Yea there are a few some bugs needed ironing on edgerouter. In my case, i need l2tp client interface which is non existence.i guess its a waiting game. Anyway, since there are many clients connected to yr system, are u segmenting them via vlan? How did u do yours? some bugs, but yeah.. waiting ubiquity programmer to fix the bug. however, it is usable and still great for enterprise level + good gui with user friendly interface.yeah.. segmenting them via vlan... have a lots of vlan and sometimes, i confuse my ownself (have 6 or 7 of them)  so i keep it simple, by using specific vlan for each site. |
|
|
Dec 29 2016, 07:51 AM
Show posts by this member only | IPv6 | Post
#132
|
|
Junior Member
677 posts Joined: Apr 2008
|
Ahaa.. i would imagine that will be confusing. Btw, does pppoe on unifi biz require vlan? I dont suppose they hav an iptv with it right? Btw, is there any free hotspot deployed around your system area? I may go to the area and check it out. LOL
|
|
|
Dec 29 2016, 11:52 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Dec 29 2016, 07:51 AM) Ahaa.. i would imagine that will be confusing. Btw, does pppoe on unifi biz require vlan? I dont suppose they hav an iptv with it right? Btw, is there any free hotspot deployed around your system area? I may go to the area and check it out. LOL no hotspot deploy, just normal wifi... erm, TM pppoe in malaysia have vlan tagging. just that, unifi biz dont have iptv... have you heard about Aries Telecomunication? provide 1Gbps. using fully ipv6 |
|
|
Dec 29 2016, 02:35 PM
Show posts by this member only | IPv6 | Post
#134
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(pandera999 @ Dec 29 2016, 11:52 AM) no hotspot deploy, just normal wifi... Holly wow! That must be amazing. Just one thing tho, if its ipv6 only, then the rest of ipv4 wont work. I can count my ipv6 use with one hand. Lol. Maybe can setup the router to tunnel an ipv4 route. But i have not study that yet. Cz most isp uses a stacked protocol anyway. Damn thats interesting erm, TM pppoe in malaysia have vlan tagging. just that, unifi biz dont have iptv... have you heard about Aries Telecomunication? provide 1Gbps. using fully ipv6 |
|
|
Dec 29 2016, 06:12 PM
|
Senior Member
1,820 posts Joined: May 2010 From: Kuala Lumpur
|
Got ER-Lite yesterday and setup within 10 minutes, all running fine.
OpenVPN site-to-site VPN setup to ER-8 sitting in UK office, working without issues (had Windows 10 drop L2TP VPN every couple of hours before - hence taken this approach) Now I've set up the VPN I'd like to block some of the traffic as I only really need to have connection to the NVR for CCTV and RDP into a couple of machines. Also, the ER-8 side doesn't need access to any devices in my internal network. Is there an easy way to set this up, or just a bunch of custom firewall rules? Previously only used client to site VPN so that was a little easier. |
|
|
Dec 29 2016, 09:16 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Dec 29 2016, 02:35 PM) Holly wow! That must be amazing. Just one thing tho, if its ipv6 only, then the rest of ipv4 wont work. I can count my ipv6 use with one hand. Lol. Maybe can setup the router to tunnel an ipv4 route. But i have not study that yet. Cz most isp uses a stacked protocol anyway. Damn thats interesting yea, they said they focus on klang area for time being.. and i dont think malaysia prepare for this ipv6 yet.... still lacking in facilities. + ipv6 is very expensive |
|
|
Dec 29 2016, 09:20 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(rjb123 @ Dec 29 2016, 06:12 PM) Got ER-Lite yesterday and setup within 10 minutes, all running fine. OpenVPN site-to-site VPN setup to ER-8 sitting in UK office, working without issues (had Windows 10 drop L2TP VPN every couple of hours before - hence taken this approach) Now I've set up the VPN I'd like to block some of the traffic as I only really need to have connection to the NVR for CCTV and RDP into a couple of machines. Also, the ER-8 side doesn't need access to any devices in my internal network. Is there an easy way to set this up, or just a bunch of custom firewall rules? Previously only used client to site VPN so that was a little easier. this more likely firewall rules |
|
|
Dec 29 2016, 09:49 PM
|
|
Senior Member
1,820 posts Joined: May 2010 From: Kuala Lumpur
|
QUOTE(pandera999 @ Dec 29 2016, 09:20 PM) this more likely firewall rulesThought there might be an easier way that's all. |
|
|
Dec 29 2016, 10:44 PM
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
Ubiquiti Unifi AP a bit sad. Really need to tweak to get the best out of it.Auto function like no function
 |
|
|
Dec 30 2016, 12:02 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(cloudstrife07 @ Dec 29 2016, 10:44 PM) Ubiquiti Unifi AP a bit sad. Really need to tweak to get the best out of it.Auto function like no function latest firmware? how bout its channel? |
|
|
Dec 30 2016, 01:14 AM
|
|
Senior Member
4,688 posts Joined: Jan 2003 From: http://127.0.0.1
|
QUOTE(pandera999 @ Dec 30 2016, 12:02 AM) latest firmware? ya latest. controller on 5.3.8.2. how bout its channel?the Auto function in transmit power is still useless and there is still no active channel sensing. This post has been edited by cloudstrife07: Dec 30 2016, 01:14 AM |
|
|
Dec 30 2016, 04:39 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(cloudstrife07 @ Dec 30 2016, 01:14 AM) ya latest. controller on 5.3.8.2. thats weird.. did you contact ubnt support? live chat? the Auto function in transmit power is still useless and there is still no active channel sensing. |
|
|
Jan 5 2017, 05:27 PM
|
Junior Member
97 posts Joined: Apr 2009
|
Hi, I plan to change my router to EdgeRouter but not sure if I really need to.
Currently using Unifi 100mb Asus rt-n66u>tplink 16port gigabit switch + toughswitch 5port>2 UAP, 1 UAP-LR (3 floor) All via cat.5e Devices 2 NAS 3 streaming box Unifi hypptv Cctv Wifi devices: around 20 connected at the same time. Thanks This post has been edited by marzuki1611: Jan 5 2017, 05:27 PM |
|
|
Jan 6 2017, 12:19 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(marzuki1611 @ Jan 5 2017, 05:27 PM) Hi, I plan to change my router to EdgeRouter but not sure if I really need to. u have tplink 16port switch.. why u need another toughswitch 5 port? Currently using Unifi 100mb Asus rt-n66u>tplink 16port gigabit switch + toughswitch 5port>2 UAP, 1 UAP-LR (3 floor) All via cat.5e Devices 2 NAS 3 streaming box Unifi hypptv Cctv Wifi devices: around 20 connected at the same time. Thanks now total u have is 21 port... if me, i setup it in this way (using full ubiquiti) edge router lite > edge switch 24 port > 3 UAP (PoE via switch) |
|
|
Jan 10 2017, 04:07 PM
|
Senior Member
2,763 posts Joined: Jan 2010
|
hi, wanna ask for advice to setup ubiquiti wifi networks around the house,
3 storey house, main unifi access at middle floor. currently using old unifi router, unifi 50mb wanna change all to use ubiquiti, and setup middle floor as the main unifi connection, with acces point on top and btm floor, something like below: 
any suggestion? what would i need? |
|
|
Jan 10 2017, 05:15 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(deadravel @ Jan 10 2017, 04:07 PM) hi, wanna ask for advice to setup ubiquiti wifi networks around the house, probably, you need edge router poe5.., 1 port for unifi, 2 port will be use for AP's. have extra 2 port.3 storey house, main unifi access at middle floor. currently using old unifi router, unifi 50mb wanna change all to use ubiquiti, and setup middle floor as the main unifi connection, with acces point on top and btm floor, something like below:
any suggestion? what would i need? |
|
|
Jan 10 2017, 06:31 PM
|
|
Senior Member
2,763 posts Joined: Jan 2010
|
QUOTE(pandera999 @ Jan 10 2017, 05:15 PM) probably, you need edge router poe5.., 1 port for unifi, 2 port will be use for AP's. have extra 2 port. does ubiquiti have any wifi router? i wanna replace my unifi router fully. |
|
|
Jan 10 2017, 06:53 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(deadravel @ Jan 10 2017, 06:31 PM) does ubiquiti have any wifi router? i wanna replace my unifi router fully. nope.. no wifi router..if u need wifi router.. then current wifi router can become AP for mid floor |
|
|
Jan 10 2017, 07:03 PM
|
|
Senior Member
2,763 posts Joined: Jan 2010
|
QUOTE(pandera999 @ Jan 10 2017, 06:53 PM) nope.. no wifi router..if u need wifi router.. then current wifi router can become AP for mid floor the current one faulty. lolmeaning I need to get a router and 3 access point on each floor? how much roughly will the devices cost |
|
|
Jan 10 2017, 07:44 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(deadravel @ Jan 10 2017, 07:03 PM) the current one faulty. lol oh, then, u might need 1 ap each floor... so total is 3 ap and 1 edge router.. but u are using for home usage right.. so kinda pricey for home usage.. because ubiquiti kinda focus on enterprise.. 1 ap cost about 450+. edge router poe5. another 500+ i think.... it cost u 1k+meaning I need to get a router and 3 access point on each floor? how much roughly will the devices cost |
|
|
Jan 10 2017, 09:32 PM
|
|
Senior Member
2,763 posts Joined: Jan 2010
|
QUOTE(pandera999 @ Jan 10 2017, 07:44 PM) oh, then, u might need 1 ap each floor... so total is 3 ap and 1 edge router.. but u are using for home usage right.. so kinda pricey for home usage.. because ubiquiti kinda focus on enterprise.. 1 ap cost about 450+. edge router poe5. another 500+ i think.... it cost u 1k+ 3 ap + 1 router should be near 2k wew |
|
|
Jan 10 2017, 11:09 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(deadravel @ Jan 10 2017, 09:32 PM) 3 ap + 1 router should be near 2k eh.. sorry.. wew yeah.. thats the price.. but, i can guarantee that, no signal quality drop.. |
|
|
Jan 12 2017, 10:32 AM
|
|
Junior Member
322 posts Joined: Dec 2007
|
deadravel I am also considering the same, 3 AP and 1 router it should be amazing!
|
|
|
Jan 13 2017, 01:23 AM
|
Junior Member
317 posts Joined: Jan 2008 From: Your Face. 
|
QUOTE(deadravel @ Jan 10 2017, 04:07 PM) hi, wanna ask for advice to setup ubiquiti wifi networks around the house, I have the exact same setup as you, and have the same targeted setup as your drawing, how do you plan to do the cabling? that's the only thing stopping me atm.... 3 storey house, main unifi access at middle floor. currently using old unifi router, unifi 50mb wanna change all to use ubiquiti, and setup middle floor as the main unifi connection, with acces point on top and btm floor, something like below:
any suggestion? what would i need? |
|
|
Jan 13 2017, 09:13 AM
|
|
Senior Member
2,763 posts Joined: Jan 2010
|
QUOTE(ee7han @ Jan 13 2017, 01:23 AM) I have the exact same setup as you, and have the same targeted setup as your drawing, how do you plan to do the cabling? that's the only thing stopping me atm.... lol. no idea yet, but not so soon as welli planned to just route the cable out of the wall (to the outside) then route from outside to top floor ceiling and btm floor ceiling. that way i dont have to break so much walls. |
|
|
Jan 13 2017, 03:42 PM
|
|
Junior Member
317 posts Joined: Jan 2008 From: Your Face.
|
QUOTE(deadravel @ Jan 13 2017, 09:13 AM) lol. no idea yet, but not so soon as well you'll be routing through the roof-ceiling? hmm, sounds like a feasible idea, I do not intend to break walls too. Well, good luck with your upgrade!i planned to just route the cable out of the wall (to the outside) then route from outside to top floor ceiling and btm floor ceiling. that way i dont have to break so much walls. |
|
|
Jan 15 2017, 03:32 PM
|
|
Senior Member
1,820 posts Joined: May 2010 From: Kuala Lumpur
|
I've been using EdgeRouter Lite for a few weeks now and it's fantastic - not a single hiccup
Been running with a constant OpenVPN site-to-site tunnel to my office in UK (on an ER-8) and it hasn't dropped the connection once. Using L2TP before and I was getting drops more often (which I suspect were related to my NIC) Don't regret the purchase one bit! Now just need to figure out how to setup a Client-to-Site OpenVPN for when I'm travelling next month. |
|
|
Jan 15 2017, 05:36 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(rjb123 @ Jan 15 2017, 03:32 PM) I've been using EdgeRouter Lite for a few weeks now and it's fantastic - not a single hiccup im still having problem with vpn... i hate it... it works previously suddenly not working Been running with a constant OpenVPN site-to-site tunnel to my office in UK (on an ER-8) and it hasn't dropped the connection once. Using L2TP before and I was getting drops more often (which I suspect were related to my NIC) Don't regret the purchase one bit! Now just need to figure out how to setup a Client-to-Site OpenVPN for when I'm travelling next month.  |
|
|
Jan 15 2017, 06:48 PM
|
|
Junior Member
383 posts Joined: May 2005
|
QUOTE(pandera999 @ Jan 15 2017, 05:36 PM) im still having problem with vpn... i hate it... it works previously suddenly not working If you have multiple WAN connection, make sure VPN connection not load balanced to a different WAN from the original WAN when the VPN was initiated. Also some ISP throttle common VPN protocols (that used fixed port & protocol) for consumer internet. |
|
|
Jan 15 2017, 06:58 PM
|
|
Senior Member
1,820 posts Joined: May 2010 From: Kuala Lumpur
|
QUOTE(pandera999 @ Jan 15 2017, 05:36 PM) im still having problem with vpn... i hate it... it works previously suddenly not working To be honest the setup was a bit more hassle as had to use CLI rather than GUI, but after working no problems at all.Did you have a look at the logs? Might shed some light as to why it's not working |
|
|
Jan 15 2017, 08:21 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jio @ Jan 15 2017, 06:48 PM) If you have multiple WAN connection, make sure VPN connection not load balanced to a different WAN from the original WAN when the VPN was initiated. Also some ISP throttle common VPN protocols (that used fixed port & protocol) for consumer internet. just using single WAN. I'm still doing some test as well.. no idea why it suddenly fail. still not that free to troubleshoot at the moment.. will check it next coming thursday. |
|
|
Jan 15 2017, 08:23 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(rjb123 @ Jan 15 2017, 06:58 PM) To be honest the setup was a bit more hassle as had to use CLI rather than GUI, but after working no problems at all. yes. using CLI.. reboot.. then it will works normally. im wondering if i do something weird the router last time. Did you have a look at the logs? Might shed some light as to why it's not working |
|
|
Jan 17 2017, 09:42 AM
|
Junior Member
30 posts Joined: Oct 2009
|
QUOTE(rjb123 @ Jan 15 2017, 03:32 PM) I've been using EdgeRouter Lite for a few weeks now and it's fantastic - not a single hiccup Hi bro,Been running with a constant OpenVPN site-to-site tunnel to my office in UK (on an ER-8) and it hasn't dropped the connection once. Using L2TP before and I was getting drops more often (which I suspect were related to my NIC) Don't regret the purchase one bit! Now just need to figure out how to setup a Client-to-Site OpenVPN for when I'm travelling next month. May i know where did you buy your EdgeRouter Lite? In Malaysia? I'm planning to buy one unit. |
|
|
Jan 17 2017, 09:47 AM
|
|
Senior Member
1,820 posts Joined: May 2010 From: Kuala Lumpur
|
QUOTE(tezro @ Jan 17 2017, 09:42 AM) Hi bro, The company from the first post in here in Subang EmpireMay i know where did you buy your EdgeRouter Lite? In Malaysia? I'm planning to buy one unit. |
|
|
Jan 17 2017, 09:49 AM
|
|
Junior Member
273 posts Joined: Aug 2010
|
i am using NSM5 to beam wifi across 2km, perfect signal.....very happy with this product
|
|
|
Jan 17 2017, 10:06 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(key3hky @ Jan 17 2017, 09:49 AM) i am using NSM5 to beam wifi across 2km, perfect signal.....very happy with this product that nice to hear.. u use it as wireless bridge or cctv? |
|
|
Jan 17 2017, 10:11 AM
|
|
Junior Member
30 posts Joined: Oct 2009
|
QUOTE(rjb123 @ Jan 17 2017, 09:47 AM) The company from the first post in here in Subang Empire How do you purchase the router? Walk-in to the office or they ship it to your home using courier?Sorry bro. Too much asking question. |
|
|
Jan 17 2017, 10:16 AM
|
|
Senior Member
1,820 posts Joined: May 2010 From: Kuala Lumpur
|
QUOTE(tezro @ Jan 17 2017, 10:11 AM) How do you purchase the router? Walk-in to the office or they ship it to your home using courier? I collected it, but yeah they do use couriers too.Sorry bro. Too much asking question. Actually I was planning to buy it online initially as they're much cheaper overseas but being network equipment would probably negate those savings are paying for SIRIM. |
|
|
Jan 17 2017, 10:28 AM
|
|
Junior Member
30 posts Joined: Oct 2009
|
QUOTE(rjb123 @ Jan 17 2017, 10:16 AM) I collected it, but yeah they do use couriers too. Alright. Thank you.Actually I was planning to buy it online initially as they're much cheaper overseas but being network equipment would probably negate those savings are paying for SIRIM. I'm also thinking to buy this router from oversea but somehow i think better buy it locally. |
|
|
Jan 17 2017, 10:59 AM
|
|
Senior Member
718 posts Joined: Apr 2009 From: KL
|
hi ts,
any solution for: 1.) wifi for office (all glass partitions) 2.) wifi for guest or hotspots with accounting/security control what sort of pricing like? pm me. thx |
|
|
Jan 17 2017, 11:14 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(MISMan @ Jan 17 2017, 10:59 AM) hi ts, ugpm...any solution for: 1.) wifi for office (all glass partitions) 2.) wifi for guest or hotspots with accounting/security control what sort of pricing like? pm me. thx |
|
|
Jan 17 2017, 11:18 AM
|
|
Senior Member
1,820 posts Joined: May 2010 From: Kuala Lumpur
|
QUOTE(tezro @ Jan 17 2017, 10:28 AM) Alright. Thank you. Overseas is much cheaper - the box even states "less than $100"I'm also thinking to buy this router from oversea but somehow i think better buy it locally. But if I was to import shipping would be around $20 USD, and SIRIM agent as I don't have time to do it myself would cost another RM200. In the end the price will work out the same, so makes sense to get it locally. |
|
|
Jan 17 2017, 02:41 PM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(rjb123 @ Jan 17 2017, 11:18 AM) Overseas is much cheaper - the box even states "less than $100" Thank you for sharing yr experience. In my case its a little different. I ordered my erl from latvia and i collected it without sirim. Took a week to arrive to my house. That was around 6months ago. (Am i lucky?)But if I was to import shipping would be around $20 USD, and SIRIM agent as I don't have time to do it myself would cost another RM200. In the end the price will work out the same, so makes sense to get it locally. And then, a week ago i ordered a ccr router from poland, dhl called me 2 days after shipment saying that i need sirim for it. I told them that it wasnt a wifi router and told them to send it to me asap. Then what do u know. They sent it to me a day later. Again without sirim(lucky again?). In my understanding, u dont need sirim for wired router, but u need sirim for radio related product such as wifi ap. Am i wrong? Im here to share my experience, someone maybe have a clearer understanding about sirim approvals. |
|
|
Jan 17 2017, 02:44 PM
|
|
Senior Member
1,820 posts Joined: May 2010 From: Kuala Lumpur
|
QUOTE(wanttotree @ Jan 17 2017, 02:41 PM) Thank you for sharing yr experience. In my case its a little different. I ordered my erl from latvia and i collected it without sirim. Took a week to arrive to my house. That was around 6months ago. (Am i lucky?) Not sure actually what the official rules for SIRIM are - I just tend to avoid importing networking related items just in case as often the saving isn't enough to justify.And then, a week ago i ordered a ccr router from poland, dhl called me 2 days after shipment saying that i need sirim for it. I told them that it wasnt a wifi router and told them to send it to me asap. Then what do u know. They sent it to me a day later. Again without sirim(lucky again?). In my understanding, u dont need sirim for wired router, but u need sirim for radio related product such as wifi ap. Am i wrong? Im here to share my experience, someone maybe have a clearer understanding about sirim approvals. Sometimes you do get lucky - I imported iPhones a few times, and once they went through without needing SIRIM. |
|
|
Jan 17 2017, 02:58 PM
|
|
Junior Member
383 posts Joined: May 2005
|
QUOTE(rjb123 @ Jan 17 2017, 02:44 PM) Not sure actually what the official rules for SIRIM are - I just tend to avoid importing networking related items just in case as often the saving isn't enough to justify. Router usually fine if below MYR500. I ordered networking stuffs few times from amazon/eurodk/ebay for the past few years. Just make sure each shipment value incl shipping is below MYR500 to avoid being stopped by Kastam. The one thing that they will likely to get red flagged is telephony products. They are not that smart to distinguish which is the telephony products. Even stupid things like "headset" that is unrelated to telephony they may flag it. But now the currency exchange rate is so bad, there very little saving compared to last time.Sometimes you do get lucky - I imported iPhones a few times, and once they went through without needing SIRIM. |
|
|
Jan 17 2017, 04:02 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Jan 17 2017, 02:41 PM) Thank you for sharing yr experience. In my case its a little different. I ordered my erl from latvia and i collected it without sirim. Took a week to arrive to my house. That was around 6months ago. (Am i lucky?) sirim? you mean MCMC permission to operate radio waves at certain power? And then, a week ago i ordered a ccr router from poland, dhl called me 2 days after shipment saying that i need sirim for it. I told them that it wasnt a wifi router and told them to send it to me asap. Then what do u know. They sent it to me a day later. Again without sirim(lucky again?). In my understanding, u dont need sirim for wired router, but u need sirim for radio related product such as wifi ap. Am i wrong? Im here to share my experience, someone maybe have a clearer understanding about sirim approvals. |
|
|
Jan 17 2017, 05:38 PM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(pandera999 @ Jan 17 2017, 04:02 PM) sirim? you mean MCMC permission to operate radio waves at certain power? Its much simpler than that. I mean law for importing non radio related router. Does it require sirim like the rest of wifi router in the market? |
|
|
Jan 17 2017, 07:13 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Jan 17 2017, 05:38 PM) Its much simpler than that. I mean law for importing non radio related router. Does it require sirim like the rest of wifi router in the market? i think there is.. but im also not clear about if it require sirim permission or not.. but for radio operation... there is law about it.. and once more... no one cares if u operate illegal channel or not... |
|
|
Jan 18 2017, 03:05 PM
|
|
Senior Member
1,040 posts Joined: Oct 2004 From: the other side
|
previously ordered mikrotik SXT Lite5 two times through ebay. Both times okay. Just that the first time I mistakenly use old office address and after failed delivery(and kept for 1 month), poslaju sent it back to Latvia.
|
|
|
Jan 21 2017, 02:45 PM
|
Junior Member
279 posts Joined: Nov 2008 From: Heart <3
|
just a quick questions all sifu, does UBNT UniFi Security Gateway compatible with TM UniFi ?
|
|
|
Jan 21 2017, 03:36 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(Shaney @ Jan 21 2017, 02:45 PM) just a quick questions all sifu, does UBNT UniFi Security Gateway compatible with TM UniFi ? i haven try it yet.. but edge router yes... since its fully customize.... and able to do vlan tagging, so it works well... pppoe with vlan tagging... so, im not sure how unifi gateway will do... |
|
|
Jan 21 2017, 04:11 PM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(Shaney @ Jan 21 2017, 02:45 PM) just a quick questions all sifu, does UBNT UniFi Security Gateway compatible with TM UniFi ? Yup unifi does support pppoe over vlan |
|
|
Jan 21 2017, 04:46 PM
|
|
Junior Member
279 posts Joined: Nov 2008 From: Heart <3
|
thanks
QUOTE(pandera999 @ Jan 21 2017, 03:36 PM) i haven try it yet.. but edge router yes... since its fully customize.... and able to do vlan tagging, so it works well... pppoe with vlan tagging... so, im not sure how unifi gateway will do... |
|
|
Jan 21 2017, 04:57 PM
|
|
Junior Member
279 posts Joined: Nov 2008 From: Heart <3
|
thanks!
I plan to do the similar setup like another forumer. Considering between three setup Unifi Modem > ERPoe-5 > 4 or 5 UBNT UAP AC Pro Unifi Modem > UBNT Security Gateway > TS-8-PRO > 4 or 5 UBNT UAP AC Pro Unifi Modem > Unifi Stock Router (reason : using hyppty box through wifi vlan tag) > TS-8-PRO> 4 or 5 UBNT UAP AC Pro I saw that UBNT AP can set vlan tag through wifi. So i guess i could set up a secondary WIFI SSID and vlan tag it for hypptbox? My setup = want every hardware do its own task rather than AIO to distribute the load in order to cater big family members of mine? 5 MBP, 2 MacMini, 2 Apple TV, 5 iPhone, 3 iPad, Printer and Etc. My current setup is following: Unifi Modem > Unifi Stock Router (reason : using hyppty box through wifi vlan tag) > 2 Apple Airport Extreme Router running in bridge mode as AP Hope you could give me some hints, sifu  By the way, my friend is giving me previous generations of UAP AC PRO (square design) I wonder is there much different between the latest and previous generation? QUOTE(wanttotree @ Jan 21 2017, 04:11 PM) Yup unifi does support pppoe over vlan This post has been edited by Shaney: Jan 21 2017, 04:58 PM |
|
|
Jan 21 2017, 05:01 PM
|
|
Junior Member
279 posts Joined: Nov 2008 From: Heart <3
|
does all UAP AC PRO need to get the unifi cloud key to manage ?
or can just browse to its IP link would do just like all others lower end UAP AC ? |
|
|
Jan 21 2017, 08:05 PM
Show posts by this member only | IPv6 | Post
#186
|
|
Junior Member
677 posts Joined: Apr 2008
|
No u dont need the cloud key to manage, unless u wanna do users load balancing, offsite management, or hotspot. I dont think uap any web gui. All managed by the controller.
|
|
|
Jan 24 2017, 09:52 AM
|
|
Junior Member
273 posts Joined: Aug 2010
|
QUOTE(pandera999 @ Jan 17 2017, 10:06 AM) that nice to hear.. u use it as wireless bridge or cctv? i am using it as a wireless bridge. Connection is flawless, almost getting 90% from the original transmitter speed. |
|
|
Feb 9 2017, 10:39 AM
|
|
Junior Member
23 posts Joined: Feb 2009
|
QUOTE(pandera999 @ Nov 14 2016, 10:21 AM) You need wireless to cover a particular area or need cover all the factory floor? Wireless signal is not strong at some spot due to distance? Sorry for the late reply, i need to cover a particular area. Not sure i should use NanoStation or NanoBeam ? |
|
|
Feb 9 2017, 10:55 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(fairypark @ Feb 9 2017, 10:39 AM) Sorry for the late reply, i need to cover a particular area. Not sure i should use NanoStation or NanoBeam ? nanostation can use as AP and PTP devices.. as in your case, make it become AP. let it broadcast the wifi.. but you might need to plan it properly. Nanobeam if only if, you have unifi then you able to fully utilized its speed. Nanobeam is a directional antenna and you could probably connect it with a phone or a laptop @ ~300ft at best. |
|
|
Feb 9 2017, 11:18 AM
|
|
Junior Member
23 posts Joined: Feb 2009
|
QUOTE(pandera999 @ Feb 9 2017, 10:55 AM) nanostation can use as AP and PTP devices.. as in your case, make it become AP. let it broadcast the wifi.. but you might need to plan it properly. Nanobeam if only if, you have unifi then you able to fully utilized its speed. Nanobeam is a directional antenna and you could probably connect it with a phone or a laptop @ ~300ft at best. Thanks for advice ! |
|
|
Feb 11 2017, 03:54 AM
|
|
Junior Member
279 posts Joined: Nov 2008 From: Heart <3
|
I wonder edge router poe-5 possible to use as switch and poe at the same time ?
Eg : Etho = wan Eth1 = lan Eth2-4 = poe If can that means we can save a lot on the ubiquiti switch + Poe |
|
|
Feb 11 2017, 05:08 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(Shaney @ Feb 11 2017, 03:54 AM) I wonder edge router poe-5 possible to use as switch and poe at the same time ? yes.. canEg : Etho = wan Eth1 = lan Eth2-4 = poe If can that means we can save a lot on the ubiquiti switch + Poe |
|
|
Feb 11 2017, 06:22 PM
Show posts by this member only | IPv6 | Post
#193
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(Shaney @ Feb 11 2017, 03:54 AM) I wonder edge router poe-5 possible to use as switch and poe at the same time ? Tbh the new us8 60w is cheaper and have more ports. Maybe u can look into that. Its on sale now, but not sure if local dist have it in stock yet. If i were u i would look for a good deal online. Eg: senetic.co.uk. (their shipping is cheaper than most places)Eg : Etho = wan Eth1 = lan Eth2-4 = poe If can that means we can save a lot on the ubiquiti switch + Poe This post has been edited by wanttotree: Feb 11 2017, 06:23 PM |
|
|
Feb 12 2017, 03:57 AM
|
|
Junior Member
279 posts Joined: Nov 2008 From: Heart <3
|
Thanks for the heads up guys.
|
|
|
Feb 12 2017, 10:43 AM
|
|
Senior Member
829 posts Joined: Apr 2007
|
if buy from oversea. its depend on you luck.. the best is try deal with seller to change the price to under rm200 below and remark as tester
|
|
|
Feb 13 2017, 01:27 PM
|
Senior Member
1,040 posts Joined: Mar 2006
|
Hi,
I'm plan to do bridge for a distance 2km and here is my configuration. Location A = Fiber time router (300MBP) > NBE-5AC-16 Location B = NBE-5AC-16 > Router. Is that I'm correct to setup like that ?. Thank you all sifu first. Regards Symon Lim |
|
|
Feb 13 2017, 01:54 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(lwk523 @ Feb 13 2017, 01:27 PM) Hi, yesI'm plan to do bridge for a distance 2km and here is my configuration. Location A = Fiber time router (300MBP) > NBE-5AC-16 Location B = NBE-5AC-16 > Router. Is that I'm correct to setup like that ?. Thank you all sifu first. Regards Symon Lim |
|
|
Feb 13 2017, 03:27 PM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(lwk523 @ Feb 13 2017, 01:27 PM) Hi, Damn this is rly interesting project. Location b is landed or high rise too?I'm plan to do bridge for a distance 2km and here is my configuration. Location A = Fiber time router (300MBP) > NBE-5AC-16 Location B = NBE-5AC-16 > Router. Is that I'm correct to setup like that ?. Thank you all sifu first. Regards Symon Lim |
|
|
Feb 13 2017, 04:33 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Feb 13 2017, 03:27 PM) Damn this is rly interesting project. Location b is landed or high rise too? its a common project.. the challenge is that, Line of Sight, and weather factor. especially heavy rain |
|
|
Feb 13 2017, 06:04 PM
|
|
Senior Member
1,040 posts Joined: Mar 2006
|
QUOTE(wanttotree @ Feb 13 2017, 03:27 PM) Damn this is rly interesting project. Location b is landed or high rise too? High rise sure with time fibre and another station is landed. |
|
|
Feb 13 2017, 06:10 PM
|
|
Senior Member
1,040 posts Joined: Mar 2006
|
QUOTE(pandera999 @ Feb 13 2017, 04:33 PM) its a common project.. the challenge is that, Line of Sight, and weather factor. especially heavy rain Thank bro,NBE-5AC-16 can provide strong signal strong even in heavy rain for 2KM distance ? or should I go for NBE-5AC-19 ? Location A = Fiber time router (300MBP) > NBE-5AC-16 AP mode Location B = NBE-5AC-16 > Router. station mode Is that correct for mode selection ? Thank alot pandera999 . This post has been edited by lwk523: Feb 13 2017, 06:12 PM |
|
|
Feb 13 2017, 07:04 PM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(lwk523 @ Feb 13 2017, 06:10 PM) Thank bro, What kind of throughput are u expecting out of this setup? I am planning to deploy similar setup but times 10 range and maybe no line of sight whatsoever. Not sure if its even possible.NBE-5AC-16 can provide strong signal strong even in heavy rain for 2KM distance ? or should I go for NBE-5AC-19 ? Location A = Fiber time router (300MBP) > NBE-5AC-16 AP mode Location B = NBE-5AC-16 > Router. station mode Is that correct for mode selection ? Thank alot pandera999 . |
|
|
Feb 13 2017, 09:24 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(lwk523 @ Feb 13 2017, 06:10 PM) Thank bro, yes.. correct...NBE-5AC-16 can provide strong signal strong even in heavy rain for 2KM distance ? or should I go for NBE-5AC-19 ? Location A = Fiber time router (300MBP) > NBE-5AC-16 AP mode Location B = NBE-5AC-16 > Router. station mode Is that correct for mode selection ? Thank alot pandera999 . |
|
|
Feb 13 2017, 09:25 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Feb 13 2017, 07:04 PM) What kind of throughput are u expecting out of this setup? I am planning to deploy similar setup but times 10 range and maybe no line of sight whatsoever. Not sure if its even possible. 10 times range? 20km....i suggest you get airFiber from which point to which point? |
|
|
Feb 17 2017, 07:06 AM
|
|
Junior Member
279 posts Joined: Nov 2008 From: Heart <3
|
what do you think of getting ubiquiti stuff from amazon usa and get it shipped back to malaysia?
pricing on amazon is really cheaper as compared to most of the online reseller from UK, AUSSIE. there are many company providing such services. even post malaysia providing such service through their official website - https://www.ezipoz.my.post i never try the service before. wonder and worried about the chance of the item getting taxed when passing through kastam? or all electronic stuff won't be taxed? as I'm planning to get complete set x2 = USG, cloud key, smart switch 8port 150w, uap ac pro x5 bundle. QUOTE(wanttotree @ Feb 11 2017, 06:22 PM) Tbh the new us8 60w is cheaper and have more ports. Maybe u can look into that. Its on sale now, but not sure if local dist have it in stock yet. If i were u i would look for a good deal online. Eg: senetic.co.uk. (their shipping is cheaper than most places) |
|
|
Feb 17 2017, 11:27 AM
|
|
Junior Member
677 posts Joined: Apr 2008
|
It wil definitely be charged gst bro. Uap ac pro will need sirim approval. Do yr comparison after price+shipping+gst. Mind you they dont calculate for u. Do it yrself. If the price difference is significance then it might be worth it. U do have to drive over to sirim office to get approval too. Once it arrived u will provide the documentations to customs. One more thing, if u are buying off amazon. Make sure u get uap that is international version. If u accidentally bought the us version, u will be disappointed to see the less powerful wifi strenght. Usually i will take arnd 2-3 weeks to look around the internet to look for the best deal so i would still save a lot after gst charges. I hope this helpes.
|
|
|
Feb 19 2017, 11:37 AM
|
|
Junior Member
279 posts Joined: Nov 2008 From: Heart <3
|
cheers
QUOTE(wanttotree @ Feb 17 2017, 11:27 AM) It wil definitely be charged gst bro. Uap ac pro will need sirim approval. Do yr comparison after price+shipping+gst. Mind you they dont calculate for u. Do it yrself. If the price difference is significance then it might be worth it. U do have to drive over to sirim office to get approval too. Once it arrived u will provide the documentations to customs. One more thing, if u are buying off amazon. Make sure u get uap that is international version. If u accidentally bought the us version, u will be disappointed to see the less powerful wifi strenght. Usually i will take arnd 2-3 weeks to look around the internet to look for the best deal so i would still save a lot after gst charges. I hope this helpes. |
|
|
Mar 1 2017, 03:42 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
rioven
do you know how to configure IPTV ™ on edge router? i believe it has vlan tagging of 600.. but, seems not working. is the vlan need to be in same IP range? |
|
|
Mar 1 2017, 07:19 PM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(pandera999 @ Mar 1 2017, 03:42 PM) rioven Hey man, i do. Check my tutorial. Its full setup for unifi(yes with iptv hypptv). Its in my post. Let me know how it goes. =)do you know how to configure IPTV ™ on edge router? i believe it has vlan tagging of 600.. but, seems not working. is the vlan need to be in same IP range? This post has been edited by wanttotree: Mar 1 2017, 07:20 PM |
|
|
Mar 3 2017, 02:57 PM
Show posts by this member only | IPv6 | Post
#210
|
|
Junior Member
29 posts Joined: Dec 2015
|
Hi there, any idea when the new UAP-AC-HD will be available in Malaysia?
|
|
|
Mar 3 2017, 05:59 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(tech noob @ Mar 3 2017, 02:57 PM) Hi there, any idea when the new UAP-AC-HD will be available in Malaysia? singapore also waiting for it.. and it will be very2 expensive |
|
|
Mar 10 2017, 05:37 PM
Show posts by this member only | IPv6 | Post
#212
|
|
Junior Member
29 posts Joined: Dec 2015
|
the price should be cheaper than cisco aironet 1852e, but both are out of stock
|
|
|
Mar 16 2017, 10:20 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
Configuring facebook login is damn difficult...
|
|
|
Mar 16 2017, 05:20 PM
|
|
Junior Member
83 posts Joined: Mar 2017
|
beta tester. Unifi Controller
|
|
|
Mar 19 2017, 01:05 AM
|
Newbie
6 posts Joined: Mar 2017 From: kuala lumpur
|
Hi
I have Unifi and setup edgerouter-x with ap-ac-lr for simple home use. I configured using wanttotree tutorial. https://forum.lowyat.net/index.php?showtopi...276&hl=ubiquiti It is a simple enough config. QUESTION: 1. Will be changing to Time Fibre next month. I want to check on the vlan for TIME. (eg: unifi= 500 / maxis fiber= 621).... what's for TIME? 2. I suppose the rest of the setup is as per wanttotree instructions for unifi and maxis...? Btw, sharing the below youtube video for simple config on the edgerouter-x https://www.youtube.com/watch?v=f7FeYsJqotc There is also a side function that edge router-x owners can do to enhance the speed of your internet - hwnat offloading enable. see youtube video on using cli or config tree to enable this function. The last part of the video also shows passthrough poe - basically u can use the 24v injector (supplied together w any ap-ac) and use it to power both edgerouter-x and ap-ac (so u just need only one power plug). Cheers |
|
|
Mar 19 2017, 02:10 AM
|
All Stars
11,455 posts Joined: Oct 2007 From: KL
|
QUOTE(jpelorat @ Mar 19 2017, 01:05 AM) ... No VLAN for TIME, just configure pppoe as usual.QUESTION: 1. Will be changing to Time Fibre next month. I want to check on the vlan for TIME. (eg: unifi= 500 / maxis fiber= 621).... what's for TIME? 2. I suppose the rest of the setup is as per wanttotree instructions for unifi and maxis...? ... |
|
|
Mar 20 2017, 12:57 PM
|
|
Newbie
6 posts Joined: Mar 2017 From: kuala lumpur
|
QUOTE(soonwai @ Mar 19 2017, 02:10 AM) No VLAN for TIME, just configure pppoe as usual. Ah. I see. Thanks! |
|
|
Mar 21 2017, 08:29 PM
|
Senior Member
2,281 posts Joined: Feb 2012
|
any recommendation of mesh router?
|
|
|
Mar 31 2017, 12:18 PM
|
|
Junior Member
335 posts Joined: Apr 2006 From: Kuala Lumpur
|
TS posted a link to Lelong Sublime's website which sells Ubiquiti stuff. Is that where most of you get this HW? Or are there any retailers around KL area?
am thinking of getting AP & router. TQ |
|
|
Mar 31 2017, 01:02 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jack208 @ Mar 31 2017, 12:18 PM) TS posted a link to Lelong Sublime's website which sells Ubiquiti stuff. Is that where most of you get this HW? Or are there any retailers around KL area? am thinking of getting AP & router. TQ izit.. but i did not post any lelong website..there are 3 or 4 include sublime selling HW. but for advancedata, im pretty sure they directly import it from US |
|
|
Mar 31 2017, 05:46 PM
|
|
Senior Member
1,865 posts Joined: Jan 2003 From: XBOX Live
|
just curious where can we get the EdgeRouterX here
 |
|
|
Mar 31 2017, 07:26 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(calvin @ Mar 31 2017, 05:46 PM) just curious where can we get the EdgeRouterX here been looking for it? |
|
|
Apr 1 2017, 08:51 AM
|
|
Senior Member
1,865 posts Joined: Jan 2003 From: XBOX Live
|
QUOTE(pandera999 @ Mar 31 2017, 07:26 PM) been looking for it? Yeah.. I'm certain it wouldn't be on shelves here .. only seen them in SG |
|
|
Apr 1 2017, 11:35 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(calvin @ Apr 1 2017, 08:51 AM) Yeah.. I'm certain it wouldn't be on shelves here .. only seen them in SG have you check with local reseller? |
|
|
Apr 6 2017, 02:08 PM
|
|
All Stars
11,455 posts Joined: Oct 2007 From: KL
|
Does UBNT have a demo EdgeOS simulator somewhere on the internet? web or cli. Something like what Mikrotik has at http://demo.mt.lv.
Need to muck around with it as I have very little experience with edgeos and someone wants me to setup an ERL. This post has been edited by soonwai: Apr 6 2017, 02:13 PM |
|
|
Apr 6 2017, 03:21 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(soonwai @ Apr 6 2017, 02:08 PM) Does UBNT have a demo EdgeOS simulator somewhere on the internet? web or cli. Something like what Mikrotik has at http://demo.mt.lv. too bad i dont find any too...Need to muck around with it as I have very little experience with edgeos and someone wants me to setup an ERL. edgeOS is based on VyOS linux.. i dont really like VyOS and i feel EdgeOS have that kind of characteristics.... oh, what you plan to do with ERL? |
|
|
Apr 6 2017, 03:49 PM
|
|
All Stars
11,455 posts Joined: Oct 2007 From: KL
|
QUOTE(pandera999 @ Apr 6 2017, 03:21 PM) too bad i dont find any too... Just plain UniFi setup. There's a guide here by wanttotree so that's not a prob. Will probably have to do trunking for vlan 500 & 600 down to a switch. Conceptually, no problem, but no idea how to configure with EdgeOS.edgeOS is based on VyOS linux.. i dont really like VyOS and i feel EdgeOS have that kind of characteristics.... oh, what you plan to do with ERL? |
|
|
Apr 6 2017, 04:45 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(soonwai @ Apr 6 2017, 03:49 PM) Just plain UniFi setup. There's a guide here by wanttotree so that's not a prob. Will probably have to do trunking for vlan 500 & 600 down to a switch. Conceptually, no problem, but no idea how to configure with EdgeOS. just running wizard... do upgrade to latest firmware before you configure anything |
|
|
Apr 7 2017, 04:26 PM
|
|
All Stars
11,455 posts Joined: Oct 2007 From: KL
|
Anyone here planning to upgrade to UAP ACs? If you have an old UAP 2.4GHz you want to get rid off, let me know please. I need one to mess around with.
|
|
|
Apr 10 2017, 10:05 AM
|
|
Junior Member
83 posts Joined: Mar 2017
|
hardly to get used 1... unless someone want to replace current UAP to AC version.
|
|
|
Apr 12 2017, 11:02 AM
Show posts by this member only | IPv6 | Post
#231
|
|
Junior Member
335 posts Joined: Apr 2006 From: Kuala Lumpur
|
Those using the UAP-AC-LITE or others in this series, did you upgrade your firmware to the latest 3.7.51.6230?
|
|
|
Apr 12 2017, 11:27 AM
|
|
Junior Member
360 posts Joined: Jan 2003
|
anyone can recommend a good access point for office around 50 users?
This post has been edited by guardioo: Apr 12 2017, 11:28 AM |
|
|
Apr 12 2017, 11:56 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jack208 @ Apr 12 2017, 11:02 AM) Those using the UAP-AC-LITE or others in this series, did you upgrade your firmware to the latest 3.7.51.6230? i just plan to upgrade mine.. im using ac lite in my room.. is there somethings wrong? |
|
|
Apr 12 2017, 11:57 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(guardioo @ Apr 12 2017, 11:27 AM) anyone can recommend a good access point for office around 50 users? UAP units... and planted at few area to reduce traffiq in 1 AP |
|
|
Apr 12 2017, 12:36 PM
Show posts by this member only | IPv6 | Post
#235
|
|
Junior Member
335 posts Joined: Apr 2006 From: Kuala Lumpur
|
QUOTE(pandera999 @ Apr 12 2017, 11:56 AM) i just plan to upgrade mine.. im using ac lite in my room.. is there somethings wrong? haha.. no I dunno since I've not. So I thought of checking in here to see if anyone has done that. I only have one UAP so if it kena problems, then I'm screwed. if you have more than one, perhaps upgrade one unit first, do a test before you upgrade all the rest. You can track this thread https://community.ubnt.com/t5/UniFi-Wireles...890457#U1890457 |
|
|
Apr 12 2017, 01:07 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jack208 @ Apr 12 2017, 12:36 PM) haha.. no I dunno since I've not. So I thought of checking in here to see if anyone has done that. I only have one UAP so if it kena problems, then I'm screwed. if you have more than one, perhaps upgrade one unit first, do a test before you upgrade all the rest. its not stable yet it seems... do not upgrade the rest.. i haven upgrade it yet.. as im scared too You can track this thread https://community.ubnt.com/t5/UniFi-Wireles...890457#U1890457 wonder if its affect ac lite only or all AP... this gonna be fix sooner or later.. 2 weeks later perhaps |
|
|
Apr 12 2017, 02:08 PM
Show posts by this member only | IPv6 | Post
#237
|
|
Junior Member
335 posts Joined: Apr 2006 From: Kuala Lumpur
|
QUOTE(pandera999 @ Apr 12 2017, 01:07 PM) its not stable yet it seems... do not upgrade the rest.. i haven upgrade it yet.. as im scared too Which firmware are your AC-LITEs on now? wonder if its affect ac lite only or all AP... this gonna be fix sooner or later.. 2 weeks later perhaps |
|
|
Apr 12 2017, 04:04 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jack208 @ Apr 12 2017, 02:08 PM) Which firmware are your AC-LITEs on now? im still using 3.7.40.6115i did not realised there is new firmware being push to 5.4.11.... |
|
|
Apr 12 2017, 04:30 PM
|
|
Junior Member
335 posts Joined: Apr 2006 From: Kuala Lumpur
|
QUOTE(pandera999 @ Apr 12 2017, 04:04 PM) im still using 3.7.40.6115 I'm using 5.4.11 on the Controller now. So far okay...i did not realised there is new firmware being push to 5.4.11.... |
|
|
Apr 12 2017, 06:21 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jack208 @ Apr 12 2017, 04:30 PM) I'm using 5.4.11 on the Controller now. So far okay... i try beta.. 5.6 if i not mistaken... have sns features.. |
|
|
Apr 13 2017, 09:07 AM
|
|
Junior Member
335 posts Joined: Apr 2006 From: Kuala Lumpur
|
I've pushed in the new firmware to my AC-LITE. It's now on 3.7.51.6230. So far everything's good. Let me monitor it for a few days, and see if anything pops up.
|
|
|
Apr 13 2017, 10:31 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jack208 @ Apr 13 2017, 09:07 AM) I've pushed in the new firmware to my AC-LITE. It's now on 3.7.51.6230. So far everything's good. Let me monitor it for a few days, and see if anything pops up. alright... common issue they said... AP disconnected and unable to ping... happen on UAP so far.. |
|
|
Apr 13 2017, 10:37 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
UAP AC HD (the new) seems like cant be powerup by using switch 250w... needs more power
|
|
|
Apr 13 2017, 11:11 AM
|
|
Junior Member
383 posts Joined: May 2005
|
QUOTE(pandera999 @ Apr 13 2017, 10:37 AM) UAP AC HD (the new) seems like cant be powerup by using switch 250w... needs more power Don't plug it to passive POE 24v ports. You have to plug it to 802.at port. |
|
|
Apr 13 2017, 01:34 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jio @ Apr 13 2017, 11:11 AM) Don't plug it to passive POE 24v ports. You have to plug it to 802.at port. powerup via switch... but ac hd need more power even 250 have passive 48v |
|
|
Apr 13 2017, 02:18 PM
|
|
Junior Member
383 posts Joined: May 2005
|
QUOTE(pandera999 @ Apr 13 2017, 01:34 PM) powerup via switch... but ac hd need more power even 250 have passive 48v Edgeswitch 250W don't have 48V passive. You will have to set the port to 802.at if you want to use 48V, which is required for ac hd. Anyway you tested this power issue yourself or just based on 1 report on ubiquiti forum? I tested edgeswitch before it had no problem handling almost 20w in single port which is more than the ac hd peak power, but that doesn't mean you should use all the 24 ports for POE at the same time. If from that user report, with such minimal info without the full details, all you can do is speculate. This is the problem when dealing with users providing minimal details & omitting the rest because they sure it is not important. Until someone else can confirm it, please don't speculate. There is enough misinformation nowadays that make searching for real answer difficult. |
|
|
Apr 13 2017, 02:38 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jio @ Apr 13 2017, 02:18 PM) Edgeswitch 250W don't have 48V passive. You will have to set the port to 802.at if you want to use 48V, which is required for ac hd. Anyway you tested this power issue yourself or just based on 1 report on ubiquiti forum? I tested edgeswitch before it had no problem handling almost 20w in single port which is more than the ac hd peak power, but that doesn't mean you should use all the 24 ports for POE at the same time. If from that user report, with such minimal info without the full details, all you can do is speculate. This is the problem when dealing with users providing minimal details & omitting the rest because they sure it is not important. Until someone else can confirm it, please don't speculate. There is enough misinformation nowadays that make searching for real answer difficult. thanks... set it to poe+ 802.3at powerup... i was in the forum too.. thinking wanna try but, dont have switch have 1 ac hd unit given by ubnt to singapore side...haven test powerup via switch... cz, waiting new stocks... only test it comparing speed with ac pro... using iperf do u have the unit? |
|
|
Apr 14 2017, 07:23 PM
|
|
Junior Member
383 posts Joined: May 2005
|
QUOTE(pandera999 @ Apr 13 2017, 02:38 PM) thanks... Nope, I don't have ac hd & won't be seeing 1 due to the pricing. Hard to justify the cost unless you have enough high bandwidth wifi users. Most of the time user will use gigabit lan if they need the bandwidth. Unless everyone don't have fix location in the office & they all using those ultrabook or macbook without lan port. Also it is overkill & unnecessary for home use.set it to poe+ 802.3at powerup... i was in the forum too.. thinking wanna try but, dont have switch have 1 ac hd unit given by ubnt to singapore side...haven test powerup via switch... cz, waiting new stocks... only test it comparing speed with ac pro... using iperf do u have the unit? |
|
|
Apr 14 2017, 11:10 PM
|
Senior Member
726 posts Joined: Jan 2003
|
anyone manage to integrate captive portal for ubnt unifi series?
|
|
|
Apr 15 2017, 10:42 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jio @ Apr 14 2017, 07:23 PM) Nope, I don't have ac hd & won't be seeing 1 due to the pricing. Hard to justify the cost unless you have enough high bandwidth wifi users. Most of the time user will use gigabit lan if they need the bandwidth. Unless everyone don't have fix location in the office & they all using those ultrabook or macbook without lan port. Also it is overkill & unnecessary for home use. agree |
|
|
Apr 15 2017, 10:43 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(TrialUserXP @ Apr 14 2017, 11:10 PM) anyone manage to integrate captive portal for ubnt unifi series? isnt it the configuration inside the controller itself? unless you want something like SNS login. |
|
|
Apr 15 2017, 01:35 PM
|
Senior Member
1,679 posts Joined: Jan 2010 From: Penang
|
Hi, sorry I am new here but I am looking for ways to increase and stabilise my internet speed. Currently being tortured by streamyx unstable internet connection eventhough I paid for their 8mbps package. Can this be a solution to my problem? I stay at high rise town area in Penang (Don't need hypptv)
This post has been edited by starz92: Apr 15 2017, 01:44 PM |
|
|
Apr 15 2017, 07:01 PM
|
|
Junior Member
335 posts Joined: Apr 2006 From: Kuala Lumpur
|
Hmm.. here are some interesting stats.
My TM UniFi setup at home is still using their stock router which is D-link's DIR-850L, and I've their wifi APs still switched on. I assigned a different SSID to the UAP AC LITE access point. Both on the 802.11n 2.4Ghz network. D-link's on channel 11 while Ubiquiti on channel 1. Dlink DIR-850L - channel 11 - only 1 co-channel (signal at 70ish), no overlapping Ubiquiti AC LITE - channel 1 - 2 co-channel (signal at 90ish), no overlapping Neighbours APs mostly at 70ish onwards signal strength (that's at channel 11) The AC LITE signal strength is mostly weaker than those coming from the DIR-850L - AC LITE usually 60-67 - Dlink DIR850L usually 55-60 It seems to indicate the DIR-850L is not doing a bad job or is this just a case of me not tweaking properly the AC LITE for better signal strength? |
|
|
Apr 15 2017, 08:53 PM
Show posts by this member only | IPv6 | Post
#254
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(jack208 @ Apr 15 2017, 07:01 PM) Hmm.. here are some interesting stats. Try changing the tx power to high. And mount yr uap to the ceiling instead of putting it on a desktop. Btw, uap ac lite is not made for long range. Make sure channel width is at 20mhz instead of 20/40. Experiment on channel 6 or 13 as well. Is your 5ghz ac doing okay?My TM UniFi setup at home is still using their stock router which is D-link's DIR-850L, and I've their wifi APs still switched on. I assigned a different SSID to the UAP AC LITE access point. Both on the 802.11n 2.4Ghz network. D-link's on channel 11 while Ubiquiti on channel 1. Dlink DIR-850L - channel 11 - only 1 co-channel (signal at 70ish), no overlapping Ubiquiti AC LITE - channel 1 - 2 co-channel (signal at 90ish), no overlapping Neighbours APs mostly at 70ish onwards signal strength (that's at channel 11) The AC LITE signal strength is mostly weaker than those coming from the DIR-850L - AC LITE usually 60-67 - Dlink DIR850L usually 55-60 It seems to indicate the DIR-850L is not doing a bad job or is this just a case of me not tweaking properly the AC LITE for better signal strength? |
|
|
Apr 15 2017, 09:28 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(starz92 @ Apr 15 2017, 01:35 PM) Hi, sorry I am new here but I am looking for ways to increase and stabilise my internet speed. Currently being tortured by streamyx unstable internet connection eventhough I paid for their 8mbps package. Can this be a solution to my problem? I stay at high rise town area in Penang (Don't need hypptv) this is the issue with tm copper line.. im not sure.. if someone willing to loan ERpoE5 to you... might be solve.. else, the issue with the cable itself.. less congested also lagging all the time.. |
|
|
Apr 15 2017, 09:45 PM
|
|
Senior Member
1,679 posts Joined: Jan 2010 From: Penang
|
QUOTE(pandera999 @ Apr 15 2017, 09:28 PM) this is the issue with tm copper line.. im not sure.. if someone willing to loan ERpoE5 to you... might be solve.. else, the issue with the cable itself.. less congested also lagging all the time.. Sorry i am unfamiliar with the technical term but i have an idea like this. If i apply for a unifi line at a friend place and beam the connection via WiFi to my place is it doable ? Can a house apply for 2 unifi line ? Or maybe one Streamyx and one unifi line ? |
|
|
Apr 15 2017, 10:32 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(starz92 @ Apr 15 2017, 09:45 PM) Sorry i am unfamiliar with the technical term but i have an idea like this. If i apply for a unifi line at a friend place and beam the connection via WiFi to my place is it doable ? Can a house apply for 2 unifi line ? Or maybe one Streamyx and one unifi line ? you can use in that way.... then create wireless bridge from his house to ur house. it is possible.... then terminate streamyx. just need make sure there is clear line of sight. |
|
|
Apr 15 2017, 11:10 PM
|
|
Senior Member
1,679 posts Joined: Jan 2010 From: Penang
|
QUOTE(pandera999 @ Apr 15 2017, 10:32 PM) you can use in that way.... then create wireless bridge from his house to ur house. it is possible.... then terminate streamyx. How do i ensure the line of sight and roughly how much budget do i need for the setup ? just need make sure there is clear line of sight. |
|
|
Apr 15 2017, 11:52 PM
|
|
Junior Member
335 posts Joined: Apr 2006 From: Kuala Lumpur
|
QUOTE(wanttotree @ Apr 15 2017, 08:53 PM) Try changing the tx power to high. And mount yr uap to the ceiling instead of putting it on a desktop. Btw, uap ac lite is not made for long range. Make sure channel width is at 20mhz instead of 20/40. Experiment on channel 6 or 13 as well. Is your 5ghz ac doing okay? 1) I did test it on TX Power = High. It actually gets weaker. Setting it to Auto seems to give me the "best" signal. I've not tried Medium yet to see if it gets better.2). UAP is still on the table-top. But so's the DIR-850L AP. They are actually both placed in the same location. So that negates the range and walls for the testing purpose ie my laptop is equally far from both APs. 3) Channel for both is on 20mhz. Didn't switch to channel 6 or 13 as both of those have overlapping devices in addition to co-channel (from Inssider check). May drop a test one of these days to see if it makes a difference. Thing is both channel 1 (UAP) and 11 (DIR-850L) are the ones with least interferences in my location. What I might do could be to swap the channels ie UAP to use C11 and Dlink to use C1 and see if that makes a difference. Point to make is not so much whether the UAP signal is weak or strong, but rather it seems the Dlink signal is not that bad (comparatively speaking) but the Dlink has been panned by many users as having bad signals etc. In terms of signal drops, it does appear the DIR-850L do drop more often while the UAP looks quite steady. |
|
|
Apr 20 2017, 05:03 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
according to forumer in ubnt. there is bug issue on latest controller 5.4.14. causing the wifi down.
|
|
|
Apr 29 2017, 04:39 PM
|
Senior Member
1,649 posts Joined: Jan 2003
|
anybody wanna buy my edgerouter X?
|
|
|
May 5 2017, 09:57 PM
|
|
Senior Member
4,776 posts Joined: Jan 2003
|
QUOTE(biatche @ Apr 29 2017, 04:39 PM) anybody wanna buy my edgerouter X? Damn it, missed your post. I placed my ER-X order on 30/4. |
|
|
Jun 3 2017, 12:09 PM
|
Junior Member
98 posts Joined: Jan 2005
|
Any method to transfer my internet from my house to office. Distance is 2.88km and is within eyesight. Which setup i need to buy?
|
|
|
Jun 3 2017, 04:05 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(limlim78 @ Jun 3 2017, 12:09 PM) Any method to transfer my internet from my house to office. Distance is 2.88km and is within eyesight. Which setup i need to buy? how much budget you willing to spend? i assume you have fiber kind of internet like unifi, maxis fiber or TIME |
|
|
Jun 3 2017, 11:01 PM
|
|
Junior Member
98 posts Joined: Jan 2005
|
Haha, my house dont have unifi, i only have 8mbps streamyx and no unifi here, my office more worst, 1mbps internet only and the 1mbps not even achieved 1mbps speed, only 700kbps only. So very difficult to do GST and other online transaction. so plan to do transfer the internet to my office. For budget, sure as cheap as posible lol
|
|
|
Jun 3 2017, 11:26 PM
|
Senior Member
1,136 posts Joined: Jan 2009
|
QUOTE(limlim78 @ Jun 3 2017, 11:01 PM) Haha, my house dont have unifi, i only have 8mbps streamyx and no unifi here, my office more worst, 1mbps internet only and the 1mbps not even achieved 1mbps speed, only 700kbps only. So very difficult to do GST and other online transaction. so plan to do transfer the internet to my office. For budget, sure as cheap as posible lol i believe wireless point to point is your solution since both of your house are within line of slight which makes things easier.after some random google, it should be something like this http://www.radwin.com/products/point-to-point/radwin2000 or you can google keyword 2km point to point to learn more good luck and cheers |
|
|
Jun 4 2017, 12:18 AM
|
|
Senior Member
4,776 posts Joined: Jan 2003
|
QUOTE(limlim78 @ Jun 3 2017, 11:01 PM) Haha, my house dont have unifi, i only have 8mbps streamyx and no unifi here, my office more worst, 1mbps internet only and the 1mbps not even achieved 1mbps speed, only 700kbps only. So very difficult to do GST and other online transaction. so plan to do transfer the internet to my office. For budget, sure as cheap as posible lol Probably cheaper to just sign up a wireless broadband plan and use in the office. |
|
|
Jun 5 2017, 09:33 AM
|
|
Junior Member
98 posts Joined: Jan 2005
|
QUOTE(kmrdeva @ Jun 4 2017, 01:18 AM) Probably cheaper to just sign up a wireless broadband plan and use in the office. My office area dont have any other internet provider beside TM, so there is no other solution. |
|
|
Jun 5 2017, 12:22 PM
|
|
Senior Member
4,776 posts Joined: Jan 2003
|
QUOTE(limlim78 @ Jun 5 2017, 09:33 AM) My office area dont have any other internet provider beside TM, so there is no other solution. No Maxis, Celcom, Digi wireless coverage? |
|
|
Jun 5 2017, 08:16 PM
|
|
Junior Member
98 posts Joined: Jan 2005
|
QUOTE(kmrdeva @ Jun 5 2017, 01:22 PM) No Maxis, Celcom, Digi wireless coverage? Have but with only e only, not even 3g... haiz |
|
|
Jun 5 2017, 09:32 PM
|
|
Senior Member
4,776 posts Joined: Jan 2003
|
QUOTE(limlim78 @ Jun 5 2017, 08:16 PM) Have but with only e only, not even 3g... haiz That's unfortunate. Where are you located, btw? |
|
|
Jun 13 2017, 03:39 PM
|
|
Junior Member
5 posts Joined: Jun 2017
|
Anyone here managed to get the ER-8 or ERPro-8 sold by Malaysia? Was curious to know the input and output power on power adapter specs difference between those 2 models. I was planning to get it oversea and replace the power adapter with aftermarket ones. Output doesn't matter anyway, I already know how it works but still keen to know the difference between ER-8 and ERPro-8. Heard somewhere in this thread international version is better but was wondering if there is any difference on the device input power between countries and countries and countries or are they all the same? Like lets say comparing our ER-8 input power vs other country ER-8 input power.
Sorry for the noob question. This post has been edited by mileage123: Jun 13 2017, 03:40 PM |
|
|
Jun 14 2017, 02:09 AM
|
|
Junior Member
383 posts Joined: May 2005
|
QUOTE(mileage123 @ Jun 13 2017, 03:39 PM) Anyone here managed to get the ER-8 or ERPro-8 sold by Malaysia? Was curious to know the input and output power on power adapter specs difference between those 2 models. I was planning to get it oversea and replace the power adapter with aftermarket ones. Output doesn't matter anyway, I already know how it works but still keen to know the difference between ER-8 and ERPro-8. Heard somewhere in this thread international version is better but was wondering if there is any difference on the device input power between countries and countries and countries or are they all the same? Like lets say comparing our ER-8 input power vs other country ER-8 input power. The power supply is inside the router itself & accept 110v-240v. All you need is the standard 3 pin power cord that you usually use on laptop power brick. Anyway the total cost of importing ER8/ERPro-8 is not much lower than buying locally, so I don't really see the point of getting it from oversea unless it is for personal use & someone helping you to bring it back from ovesea. I'm not a fan of ER-8/ERPro-8 due to lack of SFP+ port.Sorry for the noob question. |
|
|
Jun 14 2017, 09:50 AM
|
|
Junior Member
5 posts Joined: Jun 2017
|
QUOTE(jio @ Jun 14 2017, 02:09 AM) The power supply is inside the router itself & accept 110v-240v. All you need is the standard 3 pin power cord that you usually use on laptop power brick. Anyway the total cost of importing ER8/ERPro-8 is not much lower than buying locally, so I don't really see the point of getting it from oversea unless it is for personal use & someone helping you to bring it back from ovesea. I'm not a fan of ER-8/ERPro-8 due to lack of SFP+ port. I could get the 2nd hand ERPro-8 around $280~300 excluding VAT. If I buy it from oversea including VAT, does it cover up GST or any taxes when reaches here? It's used though, just worry got halt by sirim for approval and kastam tax would be over the MSRP in Malaysia.PS : I didn't really buy stuffs above RM500 from oversea before. This post has been edited by mileage123: Jun 14 2017, 11:03 AM |
|
|
Jun 14 2017, 11:39 PM
|
|
Junior Member
383 posts Joined: May 2005
|
QUOTE(mileage123 @ Jun 14 2017, 09:50 AM) I could get the 2nd hand ERPro-8 around $280~300 excluding VAT. If I buy it from oversea including VAT, does it cover up GST or any taxes when reaches here? It's used though, just worry got halt by sirim for approval and kastam tax would be over the MSRP in Malaysia.PS : I didn't really buy stuffs above RM500 from oversea before. This post has been edited by jio: Jun 14 2017, 11:40 PM |
|
|
Jun 15 2017, 12:10 AM
|
|
Junior Member
5 posts Joined: Jun 2017
|
QUOTE(jio @ Jun 14 2017, 11:39 PM) Does the cost includes shipping? 280USD is not cheap for a used one. It will get stopped by Kastam due to the value exceed 500. Router has no duty but you will still subjected to 6% GST. And no, it is not based on the MSRP but the value stated in the commercial invoice inclusive of the shipping cost. Not worth it though. Used & without warranty for 25% cheaper than getting locally is not worth it considering the risk of it not working & potentially additional cost to get it cleared from Kastam. Yes. Guess I get the X and a switch locally then. With the current currency strength + kastam, I probably get them locally if someone there is someone bringing in unless no one is bringing in, then I don't have a choice but to just get them outside the country. Thanks for the advice |
|
|
Jun 15 2017, 07:34 AM
|
|
Junior Member
335 posts Joined: Apr 2006 From: Kuala Lumpur
|
Go to the first post of this thread. TS do sell Ubiquiti devices. And there are a few vendors selling too. All with warranty.
|
|
|
Jun 15 2017, 08:54 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(mileage123 @ Jun 15 2017, 12:10 AM) Yes. Guess I get the X and a switch locally then. With the current currency strength + kastam, you need consider duty + SIRIM... and it starting last few months (feb i think). even RMA product that we receive... we being charge by SIRIM I probably get them locally if someone there is someone bringing in unless no one is bringing in, then I don't have a choice but to just get them outside the country. Thanks for the advice and quite surprisingly... we do import quite long time ago for ubnt product suddenly SIRIM charge us per unit of the imported products. even you already paid kastam duty... |
|
|
Jun 15 2017, 04:56 PM
Show posts by this member only | IPv6 | Post
#279
|
Senior Member
551 posts Joined: Dec 2005
|
Hi...want to ask... what is the current pricing for UAP AC LR?anyone using it?any downside?
|
|
|
Jun 15 2017, 11:35 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(satanhead2003 @ Jun 15 2017, 04:56 PM) Hi...want to ask... what is the current pricing for UAP AC LR?anyone using it?any downside? rm570+ .... its commonly use... same as UAP AC Pro |
|
|
Jun 16 2017, 10:56 AM
|
Senior Member
1,417 posts Joined: Jun 2007 From: /puchong/cyberjaya/klang
|
Interesting. Got P.O.C?
|
|
|
Jun 16 2017, 11:03 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(UbuntuClient @ Jun 16 2017, 10:56 AM) Interesting. Got P.O.C? what POC you want? wiFi? ptp/ptmp? |
|
|
Jun 21 2017, 11:37 PM
|
|
Junior Member
5 posts Joined: Jun 2017
|
Trying to figure out how set this up while waiting for my units to arrive. But have yet to purchase any UAP AC yet.
Have a few questions : 1. Is it possible to have 2 ISP into 1 UAP AC? Either separated or load balanced will do but I'm keen to know if both will work or not. 2. Do I need 2 ethernet ports like the UAP AC Pro to have both ISP LAN connect to it? 3. If question 2 needs 2 ethernet port UAP AC, is there any flaw or drawbacks connecting 2 PoE Injectors into my ER-8(still curious to know this even 1 injector is enough)? |
|
|
Jun 22 2017, 04:54 AM
Show posts by this member only | IPv6 | Post
#284
|
|
Senior Member
975 posts Joined: Sep 2004 From: Setapak
|
QUOTE(mileage123 @ Jun 21 2017, 11:37 PM) Trying to figure out how set this up while waiting for my units to arrive. But have yet to purchase any UAP AC yet. Dont know much about ubnt, but here is my best answer. For question 1 n 2, UAP AC/UAP AC Pro are access point (much like a switch for LAN). All traffic to the internet is under responsible by a router. Load balance is need to be perform by router (er-8). Not sure your question no.3, each PoE injector (supplied in each UAP) is to powered for each UAP. ER-8 is powered directly to ac plug.Have a few questions : 1. Is it possible to have 2 ISP into 1 UAP AC? Either separated or load balanced will do but I'm keen to know if both will work or not. 2. Do I need 2 ethernet ports like the UAP AC Pro to have both ISP LAN connect to it? 3. If question 2 needs 2 ethernet port UAP AC, is there any flaw or drawbacks connecting 2 PoE Injectors into my ER-8(still curious to know this even 1 injector is enough)? |
|
|
Jun 30 2017, 04:34 PM
|
Senior Member
1,941 posts Joined: Jan 2003
|
Interesting
Ubiquiti GPON Nano G https://www.ubnt.com/ufiber/ufiber-nano-g/ Most likely Unifi compatible ONU. Affordable pricing... http://www.4gon.co.uk/ubiquiti-ufiber-ufna...nit-p-7013.html |
|
|
Jun 30 2017, 04:42 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(thankyou @ Jun 30 2017, 04:34 PM) Interesting waiting testing unit to arrive.. well.. if gt 1Ubiquiti GPON Nano G https://www.ubnt.com/ufiber/ufiber-nano-g/ Most likely Unifi compatible ONU. Affordable pricing... http://www.4gon.co.uk/ubiquiti-ufiber-ufna...nit-p-7013.html |
|
|
Jun 30 2017, 10:25 PM
|
 
Elite
8,399 posts Joined: Jul 2008 
|
QUOTE(thankyou @ Jun 30 2017, 04:34 PM) Interesting Looks like it is compatible with the kind of OLT TM uses.Ubiquiti GPON Nano G https://www.ubnt.com/ufiber/ufiber-nano-g/ Most likely Unifi compatible ONU. Affordable pricing... http://www.4gon.co.uk/ubiquiti-ufiber-ufna...nit-p-7013.html I believe we still need to obtain the PON password. Newer ONU from TM are locked down. |
|
|
Jul 1 2017, 12:52 PM
Show posts by this member only | IPv6 | Post
#288
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(blacktubi @ Jun 30 2017, 10:25 PM) Looks like it is compatible with the kind of OLT TM uses. Its nice to know the compatibility. Hopefully there are some ppl who can figure how to obtain the PON pwd. Was looking at sfp onu module frm huawei, and now this. Getting kinda intrigued.I believe we still need to obtain the PON password. Newer ONU from TM are locked down. |
|
|
Jul 1 2017, 02:07 PM
|
|
Junior Member
383 posts Joined: May 2005
|
QUOTE(wanttotree @ Jul 1 2017, 12:52 PM) Its nice to know the compatibility. Hopefully there are some ppl who can figure how to obtain the PON pwd. Was looking at sfp onu module frm huawei, and now this. Getting kinda intrigued. 1. PON authentication may require serial number + password. If the ISP won't change the serial number for you, your ONU must support changing the serial number. Until Ubiquity publish the documentation about this, don't bother about it.2. If you are using Huawei, you might want to try the default superadmin (telecomadmin) account. I managed to login to it last year on but later Time has updated the configuration remotely & changed the password. For Time, the password is same as the PPPoE password if I remember correctly. You can try the following steps at your own risk https://zedt.eu/tech/hardware/obtaining-adm...huawei-hg8247h/ 3. Don't bother about SFP ONU. The configuration can only be pushed from the OLT provisioning. It is meant more for service provider or corporate user. I doubt your ISP will even entertain you if you are just home or low tier business subscriber. I have a gpon onu sfp module collecting dust because of this. |
|
|
Jul 1 2017, 02:51 PM
Show posts by this member only | IPv6 | Post
#290
|
|
Senior Member
1,941 posts Joined: Jan 2003
|
QUOTE(jio @ Jul 1 2017, 02:07 PM) 1. PON authentication may require serial number + password. If the ISP won't change the serial number for you, your ONU must support changing the serial number. Until Ubiquity publish the documentation about this, don't bother about it. I've tried changing own ONU and it worked. PON password is the only thing needed for unifi. We are lucky as some European ISP pair Serial no + PON password.2. If you are using Huawei, you might want to try the default superadmin (telecomadmin) account. I managed to login to it last year on but later Time has updated the configuration remotely & changed the password. For Time, the password is same as the PPPoE password if I remember correctly. You can try the following steps at your own risk https://zedt.eu/tech/hardware/obtaining-adm...huawei-hg8247h/ 3. Don't bother about SFP ONU. The configuration can only be pushed from the OLT provisioning. It is meant more for service provider or corporate user. I doubt your ISP will even entertain you if you are just home or low tier business subscriber. I have a gpon onu sfp module collecting dust because of this. |
|
|
Jul 1 2017, 03:00 PM
Show posts by this member only | IPv6 | Post
#291
|
|
Elite
8,399 posts Joined: Jul 2008
|
QUOTE(jio @ Jul 1 2017, 02:07 PM) 1. PON authentication may require serial number + password. If the ISP won't change the serial number for you, your ONU must support changing the serial number. Until Ubiquity publish the documentation about this, don't bother about it. New ONU from TM is fully locked down. WEBUI, SSH and Telnet all disabled by default. Pretty much out of luck for new TM subscribers.2. If you are using Huawei, you might want to try the default superadmin (telecomadmin) account. I managed to login to it last year on but later Time has updated the configuration remotely & changed the password. For Time, the password is same as the PPPoE password if I remember correctly. You can try the following steps at your own risk https://zedt.eu/tech/hardware/obtaining-adm...huawei-hg8247h/ 3. Don't bother about SFP ONU. The configuration can only be pushed from the OLT provisioning. It is meant more for service provider or corporate user. I doubt your ISP will even entertain you if you are just home or low tier business subscriber. I have a gpon onu sfp module collecting dust because of this. I can confirm the PON password is same as the PPPOE password for Time. |
|
|
Jul 5 2017, 09:46 AM
|
|
Junior Member
37 posts Joined: Jul 2010
|
Dear all sifus here, I wanna ask is anyone of you using LBE-5AC-23 Ubiquiti LiteBeam AC 5GHz 23dBi AirMax CPE WiFi UBNT Bridge before?
What I'm trying to do is this:- - use it to beam(LBE 1) the signal from TIME 500mbps Building A to Building B which is 1km distance (view from google maps) - Building B receive the signal(LBE 2) and transmit it to another unit of LBE-5AC-23(LBE 3) by using CAT6 Cable - (LBE 3) will beam the signal to Building C (LBE 4) which is 1.2km distance (view from google maps). Anyone has done this setup before? Please advice whether it will works or not and also advice on setup guide if can.. Thanks all sifus.. |
|
|
Jul 5 2017, 10:08 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(yltyet @ Jul 5 2017, 09:46 AM) Dear all sifus here, I wanna ask is anyone of you using LBE-5AC-23 Ubiquiti LiteBeam AC 5GHz 23dBi AirMax CPE WiFi UBNT Bridge before? erm... do you want to provide internet from building A to building B and C? so means total gt 3 building right What I'm trying to do is this:- - use it to beam(LBE 1) the signal from TIME 500mbps Building A to Building B which is 1km distance (view from google maps) - Building B receive the signal(LBE 2) and transmit it to another unit of LBE-5AC-23(LBE 3) by using CAT6 Cable - (LBE 3) will beam the signal to Building C (LBE 4) which is 1.2km distance (view from google maps). Anyone has done this setup before? Please advice whether it will works or not and also advice on setup guide if can.. Thanks all sifus.. why not from PtMP setup. straight give internet from A to B and C as long as clear LOS. but C is 2.5km away from building A... it still can be done.. |
|
|
Jul 5 2017, 10:28 AM
|
|
Junior Member
37 posts Joined: Jul 2010
|
QUOTE(pandera999 @ Jul 5 2017, 10:08 AM) erm... do you want to provide internet from building A to building B and C? so means total gt 3 building right I'm not so sure about PTMP setup, will it affect the speed or signal? For example I'm subscribing 500mbps Internet, how much will it left in Building C? why not from PtMP setup. straight give internet from A to B and C as long as clear LOS. but C is 2.5km away from building A... it still can be done.. And then, my current setup is building B will has 2 unit of LBE-5AC-23 which 1 unit going to do receiving then send signal to another unit by using CAT6 network cable.. Please advice.. Thanks |
|
|
Jul 5 2017, 11:07 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(yltyet @ Jul 5 2017, 10:28 AM) I'm not so sure about PTMP setup, will it affect the speed or signal? For example I'm subscribing 500mbps Internet, how much will it left in Building C? A and B (PTP) then B and C (PTP)And then, my current setup is building B will has 2 unit of LBE-5AC-23 which 1 unit going to do receiving then send signal to another unit by using CAT6 network cable.. Please advice.. Thanks well.. why not do A to B and C at same time (PtMP) LBE 5AC-23 as station usage will maximized its potential. well, you can control the bandwidth how much you want provide for both of the building. and block some of streaming website (this more likely on network management). i suggesting you use rocket with antenna (sold separately) as AP. |
|
|
Jul 5 2017, 02:53 PM
|
|
Junior Member
37 posts Joined: Jul 2010
|
QUOTE(pandera999 @ Jul 5 2017, 11:07 AM) A and B (PTP) then B and C (PTP) Ic.. What is rocket with antenna? Which company's product ya? Thanks..well.. why not do A to B and C at same time (PtMP) LBE 5AC-23 as station usage will maximized its potential. well, you can control the bandwidth how much you want provide for both of the building. and block some of streaming website (this more likely on network management). i suggesting you use rocket with antenna (sold separately) as AP. |
|
|
Jul 5 2017, 04:07 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(yltyet @ Jul 5 2017, 02:53 PM) Ic.. What is rocket with antenna? Which company's product ya? Thanks.. also by ubiquiti..R5AC-Lite normally will do.. and check airMax antenna AM-5G17-90.. it sold separately... but this is actually the proper way for your wireless backhaul and bridge |
|
|
Jul 6 2017, 09:56 AM
|
|
Junior Member
37 posts Joined: Jul 2010
|
QUOTE(pandera999 @ Jul 5 2017, 04:07 PM) also by ubiquiti.. Wow.. Thanks for your suggestion..R5AC-Lite normally will do.. and check airMax antenna AM-5G17-90.. it sold separately... but this is actually the proper way for your wireless backhaul and bridge I really like your idea and also learn something from you from our conversation.. The problem now is I already bought 4 units of LBE-5AC-23 AirMax, so might only stick to the old plan.. so regret that i did not find this forum earlier... T_T BUT, i still hope you can advice me on the setup using 4 LBE units if can .. ehehhe... Thanks |
|
|
Jul 6 2017, 10:07 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(yltyet @ Jul 6 2017, 09:56 AM) Wow.. Thanks for your suggestion.. oh is it.. too bad.. well, since you do it in this way.. im not sure how efficient is the bandwidth that transfer through it.... so, before you mounting those Litebeam, i suggesting you to unbox them and upgrade their firmware first. Then, You need pairing each of them by ptp.I really like your idea and also learn something from you from our conversation.. The problem now is I already bought 4 units of LBE-5AC-23 AirMax, so might only stick to the old plan.. so regret that i did not find this forum earlier... T_T BUT, i still hope you can advice me on the setup using 4 LBE units if can .. ehehhe... Thanks |
|
|
Jul 6 2017, 12:02 PM
|
|
Junior Member
37 posts Joined: Jul 2010
|
QUOTE(pandera999 @ Jul 6 2017, 10:07 AM) oh is it.. too bad.. well, since you do it in this way.. im not sure how efficient is the bandwidth that transfer through it.... so, before you mounting those Litebeam, i suggesting you to unbox them and upgrade their firmware first. Then, You need pairing each of them by ptp. Ok.. Noted.. Will try and update here.. Can you briefly know how much user can access to one AC ? Thanks |
|
|
Jul 6 2017, 01:54 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(yltyet @ Jul 6 2017, 12:02 PM) Ok.. Noted.. the AC is not normal access point.. but you just want create bridge... it will transmit as max as it can up to your ISP bandwidth.. max is 450mbps i thinkWill try and update here.. Can you briefly know how much user can access to one AC ? Thanks |
|
|
Jul 11 2017, 08:01 PM
|
Junior Member
296 posts Joined: Mar 2010
|
I'd like to get a recommendation on what product(s) I should be getting for a home office environment.
I currently have ideas for something like this. CODE BTU -> EdgeRouter -> Switch (probably a 24-port TP-Link unmanaged) -> UAP AC LR (x2) |______> Clients Which EdgeRouter should I get? I'm currently on a UniFi 30Mbps link. I would like to be able to use OpenVPN on the router and have rock-solid stability. As of now my ASUS RT-N14UHP keeps dropping out when I'm torrenting. Any help would be much appreciated. |
|
|
Jul 11 2017, 09:06 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(ncys1 @ Jul 11 2017, 08:01 PM) I'd like to get a recommendation on what product(s) I should be getting for a home office environment. ER Lite is enough...I currently have ideas for something like this. CODE BTU -> EdgeRouter -> Switch (probably a 24-port TP-Link unmanaged) -> UAP AC LR (x2) |______> Clients Which EdgeRouter should I get? I'm currently on a UniFi 30Mbps link. I would like to be able to use OpenVPN on the router and have rock-solid stability. As of now my ASUS RT-N14UHP keeps dropping out when I'm torrenting. Any help would be much appreciated. |
|
|
Jul 11 2017, 10:26 PM
Show posts by this member only | IPv6 | Post
#304
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(ncys1 @ Jul 11 2017, 08:01 PM) I'd like to get a recommendation on what product(s) I should be getting for a home office environment. Anything edgerouter wont do too good for openvpn. Unless ur fine with 10-12mbps. In that case erx would do better than erlite.I currently have ideas for something like this. CODE BTU -> EdgeRouter -> Switch (probably a 24-port TP-Link unmanaged) -> UAP AC LR (x2) |______> Clients Which EdgeRouter should I get? I'm currently on a UniFi 30Mbps link. I would like to be able to use OpenVPN on the router and have rock-solid stability. As of now my ASUS RT-N14UHP keeps dropping out when I'm torrenting. Any help would be much appreciated. |
|
|
Aug 6 2017, 05:58 PM
Show posts by this member only | IPv6 | Post
#305
|
|
Newbie
3 posts Joined: Aug 2017
|
Do I need to subscribe to isp to use this kind of networks?
I just wonder because right now my home does not have any kind of internet. TM says that the port in my area is full. so I'm kind of searching for another way to get the internet in my house. |
|
|
Aug 6 2017, 06:39 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(GumballAdventure @ Aug 6 2017, 05:58 PM) Do I need to subscribe to isp to use this kind of networks? ISP means internet service provider such as TM, maxis, TIME... how bout maxis fiber?I just wonder because right now my home does not have any kind of internet. TM says that the port in my area is full. so I'm kind of searching for another way to get the internet in my house. |
|
|
Aug 6 2017, 06:44 PM
Show posts by this member only | IPv6 | Post
#307
|
|
Newbie
3 posts Joined: Aug 2017
|
QUOTE(pandera999 @ Aug 6 2017, 06:39 PM) ISP means internet service provider such as TM, maxis, TIME... how bout maxis fiber? They also say the port is full.can ubiquiti networks give my house internet? |
|
|
Aug 6 2017, 11:12 PM
|
Senior Member
5,714 posts Joined: Mar 2007
|
QUOTE(GumballAdventure @ Aug 6 2017, 06:44 PM) They also say the port is full. Nah bro. I think you are confusing ISP and a network company. Ubiquity networks is NOT an ISP. They are selling devices that are used to connect to the Internet, and not providing any connection to the Internet, unlike an ISP, which provide the infrastructure to connect to the Internet. can ubiquiti networks give my house internet? If your port is full, you will just have to wait until they upgrade the port and add more spaces unfortunately. |
|
|
Aug 6 2017, 11:24 PM
|
|
Newbie
3 posts Joined: Aug 2017
|
QUOTE(SilentVampire @ Aug 6 2017, 11:12 PM) Nah bro. I think you are confusing ISP and a network company. Ubiquity networks is NOT an ISP. They are selling devices that are used to connect to the Internet, and not providing any connection to the Internet, unlike an ISP, which provide the infrastructure to connect to the Internet. Bummer 😔If your port is full, you will just have to wait until they upgrade the port and add more spaces unfortunately. Well, thank you for the information. This post has been edited by GumballAdventure: Aug 6 2017, 11:27 PM |
|
|
Aug 31 2017, 01:24 PM
|
|
Junior Member
117 posts Joined: Feb 2008 From: Ampang
|
Anyone use 900Mhz CPE NLOS yet (Rocket M9 or Loco M9)?
Hard to find this CPE, mostly 2.4Ghz & 5Ghz available |
|
|
Aug 31 2017, 06:12 PM
Show posts by this member only | IPv6 | Post
#311
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(liquid.D @ Aug 31 2017, 01:24 PM) Anyone use 900Mhz CPE NLOS yet (Rocket M9 or Loco M9)? Rocket m9 is 900mhz... malaysia so far, only has 2.4 and 5ghz. you can consider litebeam for 5ghz... Hard to find this CPE, mostly 2.4Ghz & 5Ghz available NLOS so u had use fresnel zone method it seems |
|
|
Sep 13 2017, 09:30 PM
|
|
Junior Member
210 posts Joined: Jan 2009
|
Need some advice. I'm planning to deploy 3x UAP-AC-PRO to cover my 4000sf office.
I have Maxis Fibre fixed IP. For router side, I can't decide to go with Mikrotik or ERLite-3. Can any pro advise? I not sure read some where mentioned ERLite-3 not support PPPoE, which I find not very logic. |
|
|
Sep 14 2017, 05:40 AM
Show posts by this member only | IPv6 | Post
#313
|
|
Senior Member
975 posts Joined: Sep 2004 From: Setapak
|
QUOTE(liquid.D @ Aug 31 2017, 01:24 PM) Anyone use 900Mhz CPE NLOS yet (Rocket M9 or Loco M9)? I don't think so that are legal to be use in Malaysia, so far that range of frequency can be used for long range rfid.Hard to find this CPE, mostly 2.4Ghz & 5Ghz available (i might be wrong, i haven't look closely into MCMC/SKMM spectrum plan/resources). |
|
|
Sep 14 2017, 10:30 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jasonhor @ Sep 13 2017, 09:30 PM) Need some advice. I'm planning to deploy 3x UAP-AC-PRO to cover my 4000sf office. Er Lite-3 support maxis fiber.. no issue.. even TIME and Tm also can be use... just need know vlan tagging. update to latest firmware and you will see option for vlan tagging... since Erlite have limitted port... and u want deploy 3 AC pro... maybe u can go for use dumb switch (which is cheapest) to give u extra portI have Maxis Fibre fixed IP. For router side, I can't decide to go with Mikrotik or ERLite-3. Can any pro advise? I not sure read some where mentioned ERLite-3 not support PPPoE, which I find not very logic. |
|
|
Sep 14 2017, 10:56 PM
|
Junior Member
245 posts Joined: Feb 2010
|
QUOTE(ncys1 @ Jul 11 2017, 09:01 PM) I'd like to get a recommendation on what product(s) I should be getting for a home office environment. If you are heavy user of VPN you need to pick the router with higher processor.I currently have ideas for something like this. CODE BTU -> EdgeRouter -> Switch (probably a 24-port TP-Link unmanaged) -> UAP AC LR (x2) |______> Clients Which EdgeRouter should I get? I'm currently on a UniFi 30Mbps link. I would like to be able to use OpenVPN on the router and have rock-solid stability. As of now my ASUS RT-N14UHP keeps dropping out when I'm torrenting. Any help would be much appreciated. RT-N14UHP too low |
|
|
Sep 15 2017, 04:37 PM
Show posts by this member only | IPv6 | Post
#316
|
|
Junior Member
296 posts Joined: Mar 2010
|
QUOTE(pl95077 @ Sep 14 2017, 10:56 PM) If you are heavy user of VPN you need to pick the router with higher processor. Nah, I've decided against using the router for VPN. I use a Raspberry Pi 3 with Pi VPN. My RT-N14UHP just keeps dropping connections in general. Sometimes HyppTV, sometimes internet only, sometimes the whole link.RT-N14UHP too low |
|
|
Sep 16 2017, 06:57 PM
|
Junior Member
446 posts Joined: Dec 2009
|
Looks like TM UniFi got their name from Ubiquiti Networks. By the way Aruba Networks > Ubiquiti Networks. Strong, stable, high throughput on 2.4 GHz and 5 GHz. Once you go Aruba or Ruckus you'll never look back.
This post has been edited by Garena: Sep 16 2017, 07:03 PM |
|
|
Sep 20 2017, 08:28 PM
|
|
Junior Member
210 posts Joined: Jan 2009
|
QUOTE(pandera999 @ Sep 14 2017, 10:30 PM) Er Lite-3 support maxis fiber.. no issue.. even TIME and Tm also can be use... just need know vlan tagging. update to latest firmware and you will see option for vlan tagging... since Erlite have limitted port... and u want deploy 3 AC pro... maybe u can go for use dumb switch (which is cheapest) to give u extra port I have vlan tagging disabled in the tm modem. Is fixed ip pppoe working fine with ErLite-3 ? |
|
|
Sep 20 2017, 11:25 PM
|
|
Elite
8,399 posts Joined: Jul 2008
|
QUOTE(Garena @ Sep 16 2017, 06:57 PM) Looks like TM UniFi got their name from Ubiquiti Networks. By the way Aruba Networks > Ubiquiti Networks. Strong, stable, high throughput on 2.4 GHz and 5 GHz. Once you go Aruba or Ruckus you'll never look back. They are not in the same league, they are much more expensive as well. Not to mention that you need a controller to unlock the full potential of those system. UBNT is more on SME I believe.I heard the new AC HD from UBNT is pretty good performance wise. May use it to replace some older Ruckus if it is that good. |
|
|
Sep 21 2017, 12:19 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jasonhor @ Sep 20 2017, 08:28 PM) I have vlan tagging disabled in the tm modem. Is fixed ip pppoe working fine with ErLite-3 ? unifi? if u use unifi.. still it ER lite able to be use |
|
|
Sep 21 2017, 12:29 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(blacktubi @ Sep 20 2017, 11:25 PM) They are not in the same league, they are much more expensive as well. Not to mention that you need a controller to unlock the full potential of those system. UBNT is more on SME I believe. i read 1 in community forum saying AC HD performance worst than ac pro, reported by some user.... but, time to time, few patches. and active development, there is 1 forumer saying AC HD is 10x times performance than AC PRo.. someone setup school project or event.. using UAP AC HD (1 unit) handle over 200 active user simultaneouslyI heard the new AC HD from UBNT is pretty good performance wise. May use it to replace some older Ruckus if it is that good. |
|
|
Sep 27 2017, 09:29 AM
|
Junior Member
64 posts Joined: Feb 2009 From: Malacca
|
hi u know anywhere in malaysia i can buy the ubiquiti amplifi HD
|
|
|
Sep 27 2017, 09:54 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(hamlau @ Sep 27 2017, 09:29 AM) hi u know anywhere in malaysia i can buy the ubiquiti amplifi HD Amplifi HD its actually Mesh Router + 2 MESH Point..its 1 bundle.... price wise is around RM1800+ or RM1900+. i think so... |
|
|
Sep 30 2017, 06:56 PM
|
|
Senior Member
551 posts Joined: Dec 2005
|
Hi... i set up two uap ac lr in my office.. the 2nd unit is using the first unit wifi as uplink. What mode is this?is it in repeater mode which would cut the speed in half?or is it something like a mesh setup?
|
|
|
Sep 30 2017, 07:13 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(satanhead2003 @ Sep 30 2017, 06:56 PM) Hi... i set up two uap ac lr in my office.. the 2nd unit is using the first unit wifi as uplink. What mode is this?is it in repeater mode which would cut the speed in half?or is it something like a mesh setup? it looks like mesh setup... the cable not properly transmit data..... so, it use wireless uplink.. try unmount it.. and check until no wireless uplink disappear |
|
|
Oct 1 2017, 02:38 PM
|
Senior Member
1,203 posts Joined: Dec 2007 From: Bumi Kenyalang, Kuala Lumpur
|
This is my home office setup:
ISP --> ISP Modem --> EdgeRouter X ---> UAP-AC-PRO Yes I know it's messy:  |
|
|
Oct 1 2017, 05:22 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(bulkbiz @ Oct 1 2017, 02:38 PM) This is my home office setup: TM unifi right?ISP --> ISP Modem --> EdgeRouter X ---> UAP-AC-PRO Yes I know it's messy: ISP fiber box -->erx ---> ac pro.. |
|
|
Oct 2 2017, 01:38 PM
|
|
Senior Member
1,649 posts Joined: Jan 2003
|
selling my uap ac lite for RM350, anybody want?
reason is ive decided im a mikrotik person than ubnt. This post has been edited by biatche: Oct 2 2017, 01:38 PM |
|
|
Oct 2 2017, 03:30 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(biatche @ Oct 2 2017, 01:38 PM) selling my uap ac lite for RM350, anybody want? reason is ive decided im a mikrotik person than ubnt. can post at garage sales... ac lite is the lowest specs for UAP AC version... 2x2 mimo only |
|
|
Oct 2 2017, 10:33 PM
|
|
Senior Member
1,649 posts Joined: Jan 2003
|
QUOTE(pandera999 @ Oct 2 2017, 03:30 PM) can post at garage sales... ac lite is the lowest specs for UAP AC version... 2x2 mimo only |
|
|
Oct 2 2017, 10:56 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(biatche @ Oct 2 2017, 10:33 PM) not sure if anybody would appreciate it for what it is over there. where else u post? can try other platform as well |
|
|
Oct 3 2017, 09:23 AM
|
|
Junior Member
83 posts Joined: Mar 2017
|
QUOTE(biatche @ Oct 2 2017, 02:38 PM) selling my uap ac lite for RM350, anybody want? you buy it from where? how old is the ac lite?reason is ive decided im a mikrotik person than ubnt. |
|
|
Oct 3 2017, 01:09 PM
|
|
Senior Member
1,649 posts Joined: Jan 2003
|
QUOTE(AdvNetwork @ Oct 3 2017, 09:23 AM) you buy it from where? how old is the ac lite? usa, about 1 yr |
|
|
Oct 3 2017, 10:55 PM
|
|
Junior Member
30 posts Joined: Oct 2008
|
Hi.. selling my edgerouter x. Used one month and keep in box.
|
|
|
Oct 3 2017, 11:01 PM
|
|
Senior Member
4,776 posts Joined: Jan 2003
|
QUOTE(firestudio @ Oct 3 2017, 10:55 PM) Hi.. selling my edgerouter x. Used one month and keep in box. Bought in Malaysia? Please PM best price. |
|
|
Oct 4 2017, 11:16 AM
|
|
Junior Member
83 posts Joined: Mar 2017
|
QUOTE(biatche @ Oct 2 2017, 11:33 PM) not sure if anybody would appreciate it for what it is over there. even though nobody appreciate it.. but maybe someone who saw it and want it.. |
|
|
Oct 4 2017, 02:29 PM
|
|
Junior Member
296 posts Joined: Mar 2010
|
Has anybody managed to get IPv6 working on an EdgeRouter Lite?
|
|
|
Oct 4 2017, 02:47 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(ncys1 @ Oct 4 2017, 02:29 PM) Has anybody managed to get IPv6 working on an EdgeRouter Lite? hi, you can refer it here IPV6 on ERlite |
|
|
Oct 4 2017, 04:27 PM
|
|
Junior Member
296 posts Joined: Mar 2010
|
QUOTE(pandera999 @ Oct 4 2017, 02:47 PM) For WAN, do I have to specify eth0 or eth0.500? I can't seem to get IPv6 up with this guide.EDIT: I'm running v1.9.7+hotfix.3 It seems like during the Basic Setup wizard there's an option to enable DHCPv6-PD. Enabling that still doesn't give me an IPv6 address but I noticed there's some rules being set in interfaces/ethernet/eth0/vif/500/pppoe/0/dhcpv6-pd/ This post has been edited by ncys1: Oct 4 2017, 04:34 PM |
|
|
Oct 4 2017, 04:51 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(ncys1 @ Oct 4 2017, 04:27 PM) For WAN, do I have to specify eth0 or eth0.500? I can't seem to get IPv6 up with this guide. for WAN.... if u are in malaysia.. most ISP has vlan tagging... so, eth0.500 i assume... from fiber box to Erlite on eth0 slot... 500 means u are using TM ISP... EDIT: I'm running v1.9.7+hotfix.3 It seems like during the Basic Setup wizard there's an option to enable DHCPv6-PD. Enabling that still doesn't give me an IPv6 address but I noticed there's some rules being set in interfaces/ethernet/eth0/vif/500/pppoe/0/dhcpv6-pd/ so far, im not sure if malaysia have IPv6 or not... as i dont see proper facilities here yet.. and ipv4 still able to do the job |
|
|
Oct 4 2017, 04:59 PM
|
|
Junior Member
296 posts Joined: Mar 2010
|
QUOTE(pandera999 @ Oct 4 2017, 04:51 PM) for WAN.... if u are in malaysia.. most ISP has vlan tagging... so, eth0.500 i assume... from fiber box to Erlite on eth0 slot... 500 means u are using TM ISP... As far as I'm aware, TM supports IPv6. My ASUS RT-N14UHP could acquire IPv6.so far, im not sure if malaysia have IPv6 or not... as i dont see proper facilities here yet.. and ipv4 still able to do the job |
|
|
Oct 4 2017, 05:32 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(ncys1 @ Oct 4 2017, 04:59 PM) As far as I'm aware, TM supports IPv6. My ASUS RT-N14UHP could acquire IPv6. didnt i know it supports IPv6... or selected area.. did they advertise it before?other than the guide for IPV6 above.. im not really sure how to configure ipv6 yet.. |
|
|
Oct 4 2017, 09:34 PM
Show posts by this member only | IPv6 | Post
#343
|
|
Junior Member
296 posts Joined: Mar 2010
|
So I seem to have managed to get IPv6 working somewhat? When I poll for my public IP on icanhazip.com I only get my IPv4 address, but all other tests on testipv6.com (10/10 score) and ipv6-test.com (18/20 score) seems to pass. For some reason ipv6test.google.com seems to fail.
I followed the guide posted before, link has over here. So the instructions are mostly the same. In my case: CODE WAN: pppoe0 (on eth0) LAN: eth1 IPTV: eth2 First we set up firewall rules for IPv6. WAN6_IN » Click to show Spoiler - click again to hide... « WAN6_LOCAL » Click to show Spoiler - click again to hide... « So this is where configuration for us Malaysian users on PPPoE differs. While the Medium article uses eth1 as WAN, we have to use pppoe0 as WAN. CODE set interfaces ethernet eth0 vif 500 pppoe 0 firewall in ipv6-name WAN6_IN set interfaces ethernet eth0 vif 500 pppoe 0 firewall local ipv6-name WAN6_LOCAL The Medium article suggests using SLAAC CODE edit interfaces ethernet eth0 vif 500 pppoe 0 set dhcpv6-pd pd 0 prefix-length /64 set dhcpv6-pd pd 0 interface eth1 host-address ::1 set dhcpv6-pd pd 0 interface eth1 prefix-id :0 set dhcpv6-pd pd 0 interface eth1 service slaac top So then we have to enable IPv6 on the WAN interface CODE set interfaces ethernet eth0 vif 500 pppoe 0 ipv6 enable And also enable autoconfig CODE set interfaces ethernet eth0 vif 500 pppoe 0 ipv6 address autoconf enable Local LAN (in my case LAN1) should be showing something like 2001::, but WAN (pppoe0) seems to show a link local address for some reason. Any ideas? UPDATE 23:42 - Seems like IPv6 is a little hit or miss, sometimes it works on service restart and sometimes it doesn't. Wonder what's going on. This post has been edited by ncys1: Oct 4 2017, 11:43 PM |
|
|
Oct 5 2017, 09:39 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
ncys1 did you post in ubnt community? there is some developer for edge OS able to ans on some service restart and sometimes it does not...
|
|
|
Oct 5 2017, 11:36 AM
Show posts by this member only | IPv6 | Post
#345
|
|
Junior Member
296 posts Joined: Mar 2010
|
QUOTE(pandera999 @ Oct 5 2017, 09:39 AM) ncys1 did you post in ubnt community? there is some developer for edge OS able to ans on some service restart and sometimes it does not... I haven't posted in ubnt community at the moment. I've noticed that IPv6 takes quite awhile to start working. Currently WAN (pppoe0) and LAN (eth1) all have full /64 IPv6 addresses. But it's perfectly possible to resolve IPv6 connections with WAN having a link-local ff:: address while the LAN clients have 2001:: addresses. In v1.9.7, there seems to be an option to add DHCPv6-PD during the Basic Setup portion, this will add IPv6 firewall rules and set prefix delegation under eth0 vif 500 pppoe 0. You only then have to enable IPv6 and SLAAC. QUOTE(ncys1 @ Oct 4 2017, 09:34 PM) So then we have to enable IPv6 on the WAN interface If all goes well then you'll see a link-local on WAN (pppoe0) and a 2001:: on LAN (eth1).CODE set interfaces ethernet eth0 vif 500 pppoe 0 ipv6 enable And also enable autoconfig CODE set interfaces ethernet eth0 vif 500 pppoe 0 ipv6 address autoconf enable The only thing remaining is to get ICMPv6 working by adding relevant rules to the WANv6_IN firewall ruleset. |
|
|
Oct 5 2017, 05:48 PM
|
|
Senior Member
1,203 posts Joined: Dec 2007 From: Bumi Kenyalang, Kuala Lumpur
|
QUOTE(pandera999 @ Oct 1 2017, 05:22 PM) TM unifi right? It's Maxis fiber actually, running vdsl, a bit tempted to change to Time fiber, whereby it's fiber to home.ISP fiber box -->erx ---> ac pro.. |
|
|
Oct 5 2017, 05:50 PM
|
|
Senior Member
1,203 posts Joined: Dec 2007 From: Bumi Kenyalang, Kuala Lumpur
|
QUOTE(jasonhor @ Sep 13 2017, 09:30 PM) Need some advice. I'm planning to deploy 3x UAP-AC-PRO to cover my 4000sf office. For router, I would suggest you go for Ubiquiti USG. It's running really good.I have Maxis Fibre fixed IP. For router side, I can't decide to go with Mikrotik or ERLite-3. Can any pro advise? I not sure read some where mentioned ERLite-3 not support PPPoE, which I find not very logic. |
|
|
Oct 5 2017, 06:03 PM
|
|
Senior Member
1,203 posts Joined: Dec 2007 From: Bumi Kenyalang, Kuala Lumpur
|
Does anyone here know how to configure port forwarding + no-IP (dynamic IP) pppoe? I have been trying and trying but it never work. Anyone can shed some light on this? I am using ERX
This post has been edited by bulkbiz: Oct 5 2017, 06:04 PM |
|
|
Oct 5 2017, 09:49 PM
Show posts by this member only | IPv6 | Post
#349
|
|
Junior Member
296 posts Joined: Mar 2010
|
QUOTE(bulkbiz @ Oct 5 2017, 06:03 PM) Does anyone here know how to configure port forwarding + no-IP (dynamic IP) pppoe? I have been trying and trying but it never work. Anyone can shed some light on this? I am using ERX Make sure you're choosing pppoe0 as your WAN for port forwarding. Set DDNS to pull the IP from pppoe0 as well. Assuming you're on TM.This post has been edited by ncys1: Oct 5 2017, 09:51 PM |
|
|
Oct 6 2017, 09:09 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(bulkbiz @ Oct 5 2017, 05:48 PM) It's Maxis fiber actually, running vdsl, a bit tempted to change to Time fiber, whereby it's fiber to home. ohh... so you staying at apartment? TIME fiber is up and down is quite good compare to maxis and tm |
|
|
Oct 6 2017, 09:56 AM
|
|
Senior Member
1,203 posts Joined: Dec 2007 From: Bumi Kenyalang, Kuala Lumpur
|
QUOTE(ncys1 @ Oct 5 2017, 09:49 PM) Make sure you're choosing pppoe0 as your WAN for port forwarding. Set DDNS to pull the IP from pppoe0 as well. Assuming you're on TM. Yes, I did that, but still no luck. Is okay, I will try again this weekend. |
|
|
Oct 6 2017, 04:39 PM
Show posts by this member only | IPv6 | Post
#352
|
|
Junior Member
296 posts Joined: Mar 2010
|
QUOTE(bulkbiz @ Oct 6 2017, 09:56 AM) Yes, I did that, but still no luck. Is okay, I will try again this weekend.  This is what my port-forwarding page looks like. I found a link on setting up no-ip DDNS. Hope these help. |
|
|
Oct 8 2017, 01:54 PM
|
|
Junior Member
453 posts Joined: Jul 2016
|
Interesting thread, park.
|
|
|
Oct 17 2017, 09:33 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
I think everyone start to heard bout KRACK vulnerability... i think most WPA2 get hit badly.
New stable version Ubiquiti Controller has been release. QUOTE Hi all, Ubiquiti Devices & KRACK VulnerabilityWe've prepared firmware 3.9.3.7537. Please see below for the changelog and links to the firmware binaries. Firmware changes from 3.9.2: [ACIWPro] Enable DFS support. [UAP] Add more security details to scan info. [UAP] Security patch for the WPA2 vulnerability called KRACK (details HERE).* [UAP] Various backend fixes and/or improvements. [USXG] Fix fastpath tools. [HW] Improve error codes returned on firmware upgrade fail. *This primarily affects devices that support STA mode. It's worth noting that 1st gen AC devices do not support STA mode, which is why we have only released a 3.9.x firmware. Download: UAP-AC-Lite/LR/Pro/EDU/M/M-PRO/IW/IW-Pro | 3.9.3.7537 | md5 UAP-AC-HD/SHD | 3.9.3.7537 | md5 UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.9.3.7537 | md5 UAP-v2, UAP-LR-v2 | 3.9.3.7537 | md5 UAP-IW | 3.9.3.7537 | md5 UAP-Pro | 3.9.3.7537 | md5 UAP-OD+ | 3.9.3.7537 | md5 USW | 3.9.3.7537 | md5 US-L2-POE | 3.9.3.7537 | md5 US-16-XG | 3.9.3.7537 | md5 Links are all HTTPS. This assumes your device(s) are currently running at least 3.7.51, and that the device's date is properly set (i.e. it can reach a NTP server). If you encounter issues with the upgrade, or your device isn't on a minimum supported firmware, then you can change the link to HTTP before performing the upgrade. This post has been edited by pandera999: Oct 17 2017, 09:38 AM |
|
|
Oct 19 2017, 03:53 PM
|
Senior Member
6,022 posts Joined: Oct 2004
|
i have a noob question.
Could i use Switch-8 60W as a router replacement or i must use USG Gateway / EdgeRouter to connect to UAP? |
|
|
Oct 19 2017, 06:42 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(maskedchan @ Oct 19 2017, 03:53 PM) i have a noob question. switch only do routing. for router part such as USG /edge router will giving the dhcp for client so that, they can access to internet.Could i use Switch-8 60W as a router replacement or i must use USG Gateway / EdgeRouter to connect to UAP? |
|
|
Oct 25 2017, 03:10 PM
|
|
Junior Member
210 posts Joined: Jan 2009
|
QUOTE(bulkbiz @ Oct 5 2017, 05:50 PM) For router, I would suggest you go for Ubiquiti USG. It's running really good. USG better than ErLite-3 ?Does it support maxis fibre? |
|
|
Oct 25 2017, 07:05 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jasonhor @ Oct 25 2017, 03:10 PM) USG better than ErLite-3 ? these 2 have their own advantage. and yes. it support maxis fiber... as it has vlan tagging, it can be done...Does it support maxis fibre? |
|
|
Oct 25 2017, 09:50 PM
|
|
Junior Member
210 posts Joined: Jan 2009
|
QUOTE(pandera999 @ Oct 25 2017, 07:05 PM) these 2 have their own advantage. and yes. it support maxis fiber... as it has vlan tagging, it can be done... OK. I will go for USG then. You have idea how to configure static ip for pppoe?This post has been edited by jasonhor: Oct 25 2017, 09:50 PM |
|
|
Oct 25 2017, 09:53 PM
|
Senior Member
4,038 posts Joined: Aug 2005 From: Earth
|
|
|
|
Oct 25 2017, 10:47 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jasonhor @ Oct 25 2017, 09:50 PM) OK. I will go for USG then. You have idea how to configure static ip for pppoe? static ip for pppoe? the IP was given by ISP |
|
|
Oct 26 2017, 11:44 PM
|
|
Junior Member
210 posts Joined: Jan 2009
|
QUOTE(pandera999 @ Oct 25 2017, 10:47 PM) static ip for pppoe? the IP was given by ISP Mine is fixed ip |
|
|
Oct 27 2017, 02:00 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jasonhor @ Oct 26 2017, 11:44 PM) Mine is fixed ip from which ISP? |
|
|
Oct 27 2017, 02:25 PM
|
|
Junior Member
210 posts Joined: Jan 2009
|
QUOTE(pandera999 @ Oct 27 2017, 02:00 AM) from which ISP? maxis fibre |
|
|
Oct 27 2017, 04:21 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(jasonhor @ Oct 27 2017, 02:25 PM) maxis fibre the ISP give u static IP.. thats impressive... normally... once you login pppoe account... the IP will recongnized your login then.. it will be shown on the dashboard for the static ip... even dynamic IP too.. just the different that, everytime router was restarted, the dynamic IP will keep changing but static will not. |
|
|
Oct 29 2017, 01:14 PM
|
|
Junior Member
210 posts Joined: Jan 2009
|
QUOTE(pandera999 @ Oct 27 2017, 04:21 PM) the ISP give u static IP.. thats impressive... normally... once you login pppoe account... the IP will recongnized your login then.. it will be shown on the dashboard for the static ip... even dynamic IP too.. just the different that, everytime router was restarted, the dynamic IP will keep changing but static will not. For the business package, u can choose for fixed ip. of course need to pay more.My existing pfsense & previous firewall requires to manually set the ip on top of what usual pppoe setting. I believe same goes to this. |
|
|
Nov 5 2017, 06:50 AM
|
|
Junior Member
148 posts Joined: May 2008
|
Morning all. Anyone know how much AC-PRO selling here? thanks
|
|
|
Nov 5 2017, 12:18 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(Remic @ Nov 5 2017, 06:50 AM) Morning all. Anyone know how much AC-PRO selling here? thanks 700 something? no? not sure.. |
|
|
Nov 5 2017, 03:29 PM
|
|
Junior Member
148 posts Joined: May 2008
|
QUOTE(pandera999 @ Nov 5 2017, 12:18 PM) 700 something? no? not sure.. Thanks, will get 2 soon+USG+switch+key. Hopefully got end year promotion. |
|
|
Nov 22 2017, 07:20 PM
|
|
Senior Member
4,038 posts Joined: Aug 2005 From: Earth
|
Currently testing With UniFi
Amplifi HD router + Amplifi Mesh Access Point HD 
Anyone interested can pm me stock is limited |
|
|
Nov 26 2017, 11:36 PM
Show posts by this member only | IPv6 | Post
#371
|
|
Junior Member
182 posts Joined: Jun 2014
|
Hi all
I just found out about this product as im trying to find a new router to replace my old one I have a bit question and ill be thankful if you guys answer my question 1.can uap ac product replace my old router or do i need to connect uap ac product to the router first.can i connect it like this Isp>modem>uap ac 2.regarding edgerouter, do i need to buy it or it just additional for better traffic 3.it is easy for me (newbie in this area) to setup the uap ac product Im just using this product (if i buy) for home only and i found this product recommended by reddit Thank you in advance |
|
|
Nov 27 2017, 12:30 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(nateberuk @ Nov 26 2017, 11:36 PM) Hi all UAP AC is just a wireless device... it just broadcast the ssid (wifi) and provide internet access. for routing, will be done by edge router. so router will do router job, wifi, will do broadcasting job... I just found out about this product as im trying to find a new router to replace my old one I have a bit question and ill be thankful if you guys answer my question 1.can uap ac product replace my old router or do i need to connect uap ac product to the router first.can i connect it like this Isp>modem>uap ac 2.regarding edgerouter, do i need to buy it or it just additional for better traffic 3.it is easy for me (newbie in this area) to setup the uap ac product Im just using this product (if i buy) for home only and i found this product recommended by reddit Thank you in advance it is very easy to setup and it can be tricky as well.. but there is tutorial you can refer to first page. |
|
|
Nov 27 2017, 08:12 AM
|
|
Junior Member
182 posts Joined: Jun 2014
|
QUOTE(pandera999 @ Nov 27 2017, 12:30 AM) UAP AC is just a wireless device... it just broadcast the ssid (wifi) and provide internet access. for routing, will be done by edge router. so router will do router job, wifi, will do broadcasting job... Does that mean i have to buy edgerouter too?it is very easy to setup and it can be tricky as well.. but there is tutorial you can refer to first page. |
|
|
Nov 27 2017, 10:57 AM
|
|
All Stars
11,455 posts Joined: Oct 2007 From: KL
|
QUOTE(nateberuk @ Nov 27 2017, 08:12 AM) Does that mean i have to buy edgerouter too? Yes and no. Yes, you'll need a router such as the Edgerouter to go along with the UAP ACs and no, it doesn't to be an Edgerouter, any router will do. I use Mikrotik routers with UAP ACs. |
|
|
Nov 27 2017, 11:38 AM
Show posts by this member only | IPv6 | Post
#375
|
|
Junior Member
182 posts Joined: Jun 2014
|
QUOTE(soonwai @ Nov 27 2017, 10:57 AM) Yes and no. Yes, you'll need a router such as the Edgerouter to go along with the UAP ACs and no, it doesn't to be an Edgerouter, any router will do. I use Mikrotik routers with UAP ACs. Thanks for the clarificationDo i use the TM provided router or i need a better router for better speed? What i understand that is the uap ac just transmit the signal coming from the router itself. Correct me if im wrong, the installation like this Isp>modem>router>uap ac |
|
|
Nov 27 2017, 02:58 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(nateberuk @ Nov 27 2017, 11:38 AM) Thanks for the clarification its ISP (Fiber box) > modem/router > UAP ACDo i use the TM provided router or i need a better router for better speed? What i understand that is the uap ac just transmit the signal coming from the router itself. Correct me if im wrong, the installation like this Isp>modem>router>uap ac |
|
|
Nov 27 2017, 04:59 PM
Show posts by this member only | IPv6 | Post
#377
|
|
Junior Member
182 posts Joined: Jun 2014
|
QUOTE(pandera999 @ Nov 27 2017, 02:58 PM) its ISP (Fiber box) > modem/router > UAP AC Does that mean that i do not have to use the router. My setup right nowIsp fiber box>huawei modem(provide by tm)>innatech router(provide by tm) If i use uap ac,will my setup look like this? Isp fiber box>modem>uap ac Or Isp fiber box> modem>router>uap ac So far im interest in uap ac lr for coverage it cover. Do i need a better router/modem or i can just use it as it is? |
|
|
Nov 27 2017, 09:52 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(nateberuk @ Nov 27 2017, 04:59 PM) Does that mean that i do not have to use the router. My setup right now you can get uap ac only.. no issue.. your case could be isp modem router > uap ac..Isp fiber box>huawei modem(provide by tm)>innatech router(provide by tm) If i use uap ac,will my setup look like this? Isp fiber box>modem>uap ac Or Isp fiber box> modem>router>uap ac So far im interest in uap ac lr for coverage it cover. Do i need a better router/modem or i can just use it as it is? i have my setup in this way... ISP(fiber box) from TM, phone line connected to this fiber box > router > uap ac... |
|
|
Nov 27 2017, 09:57 PM
Show posts by this member only | IPv6 | Post
#379
|
|
Junior Member
182 posts Joined: Jun 2014
|
QUOTE(pandera999 @ Nov 27 2017, 09:52 PM) you can get uap ac only.. no issue.. your case could be isp modem router > uap ac.. Thanks a lot for helping me there.i have my setup in this way... ISP(fiber box) from TM, phone line connected to this fiber box > router > uap ac... Just 1 last question, does uap ac lr good for 2 stories house? I read some comment before that the coverage is not good for vertical since i will install it on the 2nd floor |
|
|
Nov 27 2017, 09:59 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(nateberuk @ Nov 27 2017, 09:57 PM) Thanks a lot for helping me there. yes. its good... as it covered wide range...Just 1 last question, does uap ac lr good for 2 stories house? I read some comment before that the coverage is not good for vertical since i will install it on the 2nd floor |
|
|
Nov 27 2017, 10:02 PM
Show posts by this member only | IPv6 | Post
#381
|
|
Junior Member
182 posts Joined: Jun 2014
|
QUOTE(pandera999 @ Nov 27 2017, 09:59 PM) yes. its good... as it covered wide range... Thanks again for fast replyI will try to use it then |
|
|
Nov 27 2017, 10:03 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(nateberuk @ Nov 27 2017, 10:02 PM) Thanks again for fast reply welcome I will try to use it then |
|
|
Dec 4 2017, 02:40 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
 dual load balancing on ER lite |
|
|
Dec 4 2017, 11:45 PM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(pandera999 @ Dec 4 2017, 02:40 PM) dual load balancing on ER lite |
|
|
Dec 5 2017, 09:39 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Dec 4 2017, 11:45 PM) Hey man, this is dual unifi 100mbps?. Kudos to u. =) What a nice sight yes.. TM fiber, they cap 50% up ... edge router not really do proper load balancing even with wizard with ER poe5 in firmware 1.8... the load balancing not work properly. since 1.9 release, i decide to try it again.. now it gives me this result. so i can resell my tplink load balancer.. and pretty weird.. tplink er5120 give me this speed  try it again jz now... even i consult with engineer still unable to fix it.. |
|
|
Dec 8 2017, 05:34 AM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(pandera999 @ Dec 5 2017, 09:39 AM) yes.. TM fiber, they cap 50% up Surprised u were still on 1.8. but hot damn thats nice. Well, u should go ahead get rid of that tp-link. Maybe swap it for a new unifi hd. LOL ... edge router not really do proper load balancing even with wizard with ER poe5 in firmware 1.8... the load balancing not work properly. since 1.9 release, i decide to try it again.. now it gives me this result. so i can resell my tplink load balancer.. and pretty weird.. tplink er5120 give me this speed try it again jz now... even i consult with engineer still unable to fix it.. |
|
|
Dec 8 2017, 02:44 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Dec 8 2017, 05:34 AM) Surprised u were still on 1.8. but hot damn thats nice. Well, u should go ahead get rid of that tp-link. Maybe swap it for a new unifi hd. LOL yeah... with 5.6.22.. USG also surprisingly have features like blockage categories like streaming media, SNS.... now still playing with it... this one gonna be much easier as totally use GUI. |
|
|
Dec 10 2017, 12:57 AM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(pandera999 @ Dec 8 2017, 02:44 PM) yeah... with 5.6.22.. USG also surprisingly have features like blockage categories like streaming media, SNS.... now still playing with it... this one gonna be much easier as totally use GUI. Oh mann.. why did u have to poison me with the usg. Now i wish they sell it cheap in france. I have a lame dilemma of new shoes vs new usg. Let me know if the blockage categories work. Does it block only? Or is there other fancy stuff too? |
|
|
Dec 10 2017, 11:33 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Dec 10 2017, 12:57 AM) Oh mann.. why did u have to poison me with the usg. Now i wish they sell it cheap in france. I have a lame dilemma of new shoes vs new usg. Let me know if the blockage categories work. Does it block only? Or is there other fancy stuff too? seems not working or i wrongly configure... blockage fail, i have no idea how it works.. however, in USG, for vpn local ip unable set it to 'any' unlike EdgeMax series. |
|
|
Dec 12 2017, 03:12 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
wanttotree
just asking your opinion on this matter where 1. Line A (TM Unifi)– All staff pc IP range 192.168.x.x 2. Line B (Maxis Fiber) – All Guest devices IP range 10.110.x.x is this possible to be made? |
|
|
Dec 15 2017, 02:03 AM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(pandera999 @ Dec 12 2017, 03:12 PM) wanttotree I think it might be possible. U can add additional firewall rules/dhcp(ofcz)/masquerade. Use vlans if ur using lite. But if u have the x, it should be straight forward enough. Let me know if u progress. I havent touched my er lite for almost a year now cz its been working non flaw since i moved it to my parents house. I could definitely replicate that setup with my mtik tho.just asking your opinion on this matter where 1. Line A (TM Unifi)– All staff pc IP range 192.168.x.x 2. Line B (Maxis Fiber) – All Guest devices IP range 10.110.x.x is this possible to be made? |
|
|
Dec 15 2017, 03:06 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(wanttotree @ Dec 15 2017, 02:03 AM) I think it might be possible. U can add additional firewall rules/dhcp(ofcz)/masquerade. Use vlans if ur using lite. But if u have the x, it should be straight forward enough. Let me know if u progress. I havent touched my er lite for almost a year now cz its been working non flaw since i moved it to my parents house. I could definitely replicate that setup with my mtik tho. Gonna try it once return from trip.. lol... basically.. next year... 😂 |
|
|
Jan 1 2018, 07:46 PM
|
|
Junior Member
133 posts Joined: Dec 2017
|
QUOTE(pandera999 @ Dec 12 2017, 03:12 PM) wanttotree Edgerouter is very capable, your case is not a problem. You also can create up to 4 SSIDs with Ubiquity AP for your company such as Line A group, Line B group, Guest (totally separate from other lans) and admins.ijust asking your opinion on this matter where 1. Line A (TM Unifi)– All staff pc IP range 192.168.x.x 2. Line B (Maxis Fiber) – All Guest devices IP range 10.110.x.x is this possible to be made? I am working on edgerouter and USG for sometimes already, dual wan, DHCP, selective wan routing, selective vpn routing, vlan tag, multiple SSIDs with different rights, forced DNAT for website content filtering, captive portal hotspot and many others. Edgerouter Lite plus Unifi AP can be very powerful for SMB already. For home usage, Edgerouter X should be enough. |
|
|
Jan 2 2018, 02:29 PM
|
Junior Member
459 posts Joined: Apr 2005 From: Mee Bandung Muor
|
Hi,
im using streamyx right now 8MB. Have lots of IOT device using Wifi to be deployed into my future home. Currently testing fews stuffs on my current house. All switches, bulbs will be wifi enable. On my current setup after changing to 2 Wifi/Router/AP i found out the wifi connection is not really stable. Sometime my Google Homes, Echo Dots cannot reconnect to wifi requiring AP reboot. Was using TM net supplied AP/Wifi/Router/Modem and curently DLink with huge antenna. Still the same .. Question 1) Would Unifi AP solve my prob Question 2) Can i use my current Dlink and configure as bridge so that Edgerouter can dial in Pppoe ? or do i need to buy dumb streamyx modem just for this? Question 3) mu future home is 2 stories bungalow around 4000 Sqf . 2 Unifi Ac pro can cover whole house? Question 4)I am running my home automation server . Will setting port forwarding easy enough for Unifi router? thanks |
|
|
Jan 2 2018, 03:10 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(kucau @ Jan 2 2018, 02:29 PM) Hi, 1 ) It depends, but if from Fiber box - edgerouter - switches - AP, then very high chances it will solve your problemim using streamyx right now 8MB. Have lots of IOT device using Wifi to be deployed into my future home. Currently testing fews stuffs on my current house. All switches, bulbs will be wifi enable. On my current setup after changing to 2 Wifi/Router/AP i found out the wifi connection is not really stable. Sometime my Google Homes, Echo Dots cannot reconnect to wifi requiring AP reboot. Was using TM net supplied AP/Wifi/Router/Modem and curently DLink with huge antenna. Still the same .. Question 1) Would Unifi AP solve my prob Question 2) Can i use my current Dlink and configure as bridge so that Edgerouter can dial in Pppoe ? or do i need to buy dumb streamyx modem just for this? Question 3) mu future home is 2 stories bungalow around 4000 Sqf . 2 Unifi Ac pro can cover whole house? Question 4)I am running my home automation server . Will setting port forwarding easy enough for Unifi router? thanks 2 ) Streamyx is using dialup right? how you connect it to the modem router? i kinda forgot how streamyx was setup, but as long as i remember, streamyx use dialup, so only have modem router setting. 3 ) for that huge space, i think you should go for UAP AC LR instead of Pro. better range covered. 4 ) Port forwarding is easy to do on Edgerouter... but if only if, it is not ADSL2+, |
|
|
Jan 2 2018, 03:49 PM
|
Junior Member
612 posts Joined: Mar 2008
|
QUOTE(pandera999 @ Dec 12 2017, 03:12 PM) wanttotree yes u could. try create vlan with each subnet on 192 and also 10. i havent try ubiquiti, but if mikrotik u can set a bridge with ip masqueradejust asking your opinion on this matter where 1. Line A (TM Unifi)– All staff pc IP range 192.168.x.x 2. Line B (Maxis Fiber) – All Guest devices IP range 10.110.x.x is this possible to be made? |
|
|
Jan 2 2018, 08:01 PM
|
|
Junior Member
133 posts Joined: Dec 2017
|
QUOTE(kucau @ Jan 2 2018, 02:29 PM) Hi, 1) unifi is ready to scale up to 1000 devices, ur case should be not a problem.im using streamyx right now 8MB. Have lots of IOT device using Wifi to be deployed into my future home. Currently testing fews stuffs on my current house. All switches, bulbs will be wifi enable. On my current setup after changing to 2 Wifi/Router/AP i found out the wifi connection is not really stable. Sometime my Google Homes, Echo Dots cannot reconnect to wifi requiring AP reboot. Was using TM net supplied AP/Wifi/Router/Modem and curently DLink with huge antenna. Still the same .. Question 1) Would Unifi AP solve my prob Question 2) Can i use my current Dlink and configure as bridge so that Edgerouter can dial in Pppoe ? or do i need to buy dumb streamyx modem just for this? Question 3) mu future home is 2 stories bungalow around 4000 Sqf . 2 Unifi Ac pro can cover whole house? Question 4)I am running my home automation server . Will setting port forwarding easy enough for Unifi router? thanks 2) I think is ok, as long as edgerouter can get internet connection, should be fine. Unless D-Link modem is the root cause of unstable internet. 3) hard to tell, need layout plan to check on heat map. 4) port forward is easy. Problem is Not sure you can get public ip or not, otherwise u need ssh reverse port forward or cloud vpn. For security reason, recommend vpn. With a lot of IOT, recommend you to use unifi series product, as you can monitor all devices and check connection status in single page. Very nice user interface and u will like it. If u not confident with unifi solution, recommend to buy one AP to do testing first if satisfy then invest more. But u need to do network planning to prevent wastage. |
|
|
Jan 5 2018, 05:52 AM
|
|
Newbie
4 posts Joined: Nov 2013
|
Hi guys,
Does anyone know how to setup HyppTV with USG and US-8-60W? I just bought these two equipment recently and managed to get the USG to perform PPPoE through WAN port with VLAN500. However, I've searched through almost all articles and posts but still have no idea how to setup HyppTV with the switch and USG. Thanks! This post has been edited by Edevane: Jan 5 2018, 05:56 AM |
|
|
Jan 5 2018, 09:38 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(Edevane @ Jan 5 2018, 05:52 AM) Hi guys, you can setup at network side i think.... and tag the vlan of hypptv.... not really familiar too with USG with hypptvDoes anyone know how to setup HyppTV with USG and US-8-60W? I just bought these two equipment recently and managed to get the USG to perform PPPoE through WAN port with VLAN500. However, I've searched through almost all articles and posts but still have no idea how to setup HyppTV with the switch and USG. Thanks! |
|
|
Jan 5 2018, 03:14 PM
|
|
Newbie
4 posts Joined: Nov 2013
|
QUOTE(pandera999 @ Jan 5 2018, 09:38 AM) you can setup at network side i think.... and tag the vlan of hypptv.... not really familiar too with USG with hypptv Thanks for the suggestion. I've tried setting up the required networks through VLAN-Only but the HyppTV STB is getting DHCP IP address from the USG instead of TM. Thus, the connection cannot be made and no image is showing. |
|
|
Jan 5 2018, 04:07 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(Edevane @ Jan 5 2018, 03:14 PM) Thanks for the suggestion. are u using TM? maxis or time?I've tried setting up the required networks through VLAN-Only but the HyppTV STB is getting DHCP IP address from the USG instead of TM. Thus, the connection cannot be made and no image is showing. |
|
|
Jan 5 2018, 04:07 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(Edevane @ Jan 5 2018, 03:14 PM) Thanks for the suggestion. are u using TM? maxis or time?I've tried setting up the required networks through VLAN-Only but the HyppTV STB is getting DHCP IP address from the USG instead of TM. Thus, the connection cannot be made and no image is showing. |
|
|
Jan 5 2018, 04:26 PM
|
|
Newbie
4 posts Joined: Nov 2013
|
QUOTE(pandera999 @ Jan 5 2018, 04:07 PM) are u using TM? maxis or time? TM's Unifi |
|
|
Jan 13 2018, 11:50 AM
|
Newbie
1 posts Joined: Jan 2009
|
Hi,
can anyone suggest good/responsive UBQT reseller in Malaysia? Need to have price list for backhaul and point to multipoint network equipments. Bought UBQT for home usage and thinking to propose the brand to my boss. |
|
|
Jan 13 2018, 01:24 PM
|
|
All Stars
11,455 posts Joined: Oct 2007 From: KL
|
QUOTE(afeezaziz @ Jan 13 2018, 11:50 AM) Hi, Try Sublime Telecom. They’re on Lelong. If you’re in KL, their offices are in Jalan Ipoh. I get my Mikrotik stuff there and the occasional UBNT.can anyone suggest good/responsive UBQT reseller in Malaysia? Need to have price list for backhaul and point to multipoint network equipments. Bought UBQT for home usage and thinking to propose the brand to my boss. |
|
|
Jan 15 2018, 09:18 AM
|
|
Junior Member
459 posts Joined: Apr 2005 From: Mee Bandung Muor
|
QUOTE(pandera999 @ Jan 2 2018, 03:10 PM) 1 ) It depends, but if from Fiber box - edgerouter - switches - AP, then very high chances it will solve your problem let say i change to unifi security gateway , connect to my Dlink Modem/wifi/router - turn off wifi and set it to bridge mode. can streamyx works this way?2 ) Streamyx is using dialup right? how you connect it to the modem router? i kinda forgot how streamyx was setup, but as long as i remember, streamyx use dialup, so only have modem router setting. 3 ) for that huge space, i think you should go for UAP AC LR instead of Pro. better range covered. 4 ) Port forwarding is easy to do on Edgerouter... but if only if, it is not ADSL2+, |
|
|
Jan 15 2018, 10:33 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(kucau @ Jan 15 2018, 09:18 AM) let say i change to unifi security gateway , connect to my Dlink Modem/wifi/router - turn off wifi and set it to bridge mode. can streamyx works this way? modem router ---> USG ---> APas like above? yes, this can works but not fully utilized the potential of your networking hardware. |
|
|
Jan 15 2018, 09:31 PM
Show posts by this member only | IPv6 | Post
#408
|
Junior Member
121 posts Joined: May 2007
|
Hi All,
I would like to use Ubiquiti EdgeRouter X To replace TIME Fiber Broadband current TP Link Archer Router. It looks like in the settings that there is no need to tag any VLAN and just PPPOE Authentication. Any sifu here can assist me in this matter? |
|
|
Jan 16 2018, 12:51 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(louislee1991 @ Jan 15 2018, 09:31 PM) Hi All, TIme dont have vlan taging... just pppoe authentication only as far as i know. have IPTV? IPTV for TIME, normally connected to their fiber box..I would like to use Ubiquiti EdgeRouter X To replace TIME Fiber Broadband current TP Link Archer Router. It looks like in the settings that there is no need to tag any VLAN and just PPPOE Authentication. Any sifu here can assist me in this matter? |
|
|
Jan 20 2018, 07:16 AM
|
|
Junior Member
326 posts Joined: Jun 2008
|
want to get your opinion here
any real benefits of cloud key vs docker? from what i see it still does the same job except for the manual updates for the latter. |
|
|
Jan 20 2018, 10:35 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(mintgadget @ Jan 20 2018, 07:16 AM) want to get your opinion here you running some VM? not really familiar with docker features adv and disadv any real benefits of cloud key vs docker? from what i see it still does the same job except for the manual updates for the latter. |
|
|
Jan 20 2018, 10:58 AM
|
|
Junior Member
326 posts Joined: Jun 2008
|
was running on pi earlier but shared resources with homebridge and it was killing it. hence decided to run on docker for synology but other than the nice gui on the cloud key it is basically the same thing, now to test is docker stable else just get the cloud key as it was built for the controller
|
|
|
Jan 20 2018, 12:43 PM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(mintgadget @ Jan 20 2018, 10:58 AM) was running on pi earlier but shared resources with homebridge and it was killing it. hence decided to run on docker for synology but other than the nice gui on the cloud key it is basically the same thing, now to test is docker stable else just get the cloud key as it was built for the controller Im using mine on synology docker. I dont see any problem with it so far. Running for a couple of years now. Cloud key is probably best for ppl who dont have dedicated server/machine and want straight forward setup. Anyone who has linux/windows machine lying around might just use that instead. Mind you, desktop grade server still need to add power consumptions into consideration. That is one advantage for cloudkey, its very low powered device. Correct me if i miss something guys.Btw, pi is good if u use it as stand alone device. If u wanna save some money, another pi running just the controller is probably not a bad idea. This post has been edited by wanttotree: Jan 20 2018, 12:47 PM |
|
|
Jan 20 2018, 01:31 PM
Show posts by this member only | IPv6 | Post
#414
|
|
Junior Member
326 posts Joined: Jun 2008
|
QUOTE(wanttotree @ Jan 20 2018, 12:43 PM) Im using mine on synology docker. I dont see any problem with it so far. Running for a couple of years now. Cloud key is probably best for ppl who dont have dedicated server/machine and want straight forward setup. Anyone who has linux/windows machine lying around might just use that instead. Mind you, desktop grade server still need to add power consumptions into consideration. That is one advantage for cloudkey, its very low powered device. Correct me if i miss something guys. Initially was running on synology docker when I had my gear setup but didn’t see a good way to update the controller. So decided to use a RPi3 thinking it was sufficient to share resources. If I was to get another RPi3 might as well spend the extra to get the cloudkey. Other than using latest build for docker, how do you update it when a new version is out. I am a sticker for getting my stuff on latest build.Btw, pi is good if u use it as stand alone device. If u wanna save some money, another pi running just the controller is probably not a bad idea. |
|
|
Jan 20 2018, 06:18 PM
|
|
Junior Member
677 posts Joined: Apr 2008
|
There is another one that is developed by russian guy that has a synology repo. Check http://synology.acmenet.ru
It wont do auto update, but once an update is available, its basically one click away. Try that and u can report back here. This post has been edited by wanttotree: Jan 20 2018, 06:19 PM |
|
|
Jan 20 2018, 08:11 PM
|
|
Junior Member
326 posts Joined: Jun 2008
|
thanks had that repo in my list but didn't know that was a package for unifi been using docker all this while. i think will give this a try, chances will end up with cloud key for simplicity.
|
|
|
Jan 21 2018, 11:53 AM
|
|
Senior Member
1,781 posts Joined: Jul 2010
|
QUOTE(afeezaziz @ Jan 13 2018, 11:50 AM) Hi, Knowing who you are, i'd say go with UBNT despite the fact that they dont hold up to their ads when used for what they're bought for. Their latest 8 port SFP+ router can only handle a couple of Gb/s when you use the other features the OS provide.can anyone suggest good/responsive UBQT reseller in Malaysia? Need to have price list for backhaul and point to multipoint network equipments. Bought UBQT for home usage and thinking to propose the brand to my boss. |
|
|
Jan 25 2018, 05:39 PM
|
|
Junior Member
121 posts Joined: May 2007
|
QUOTE(System Error Message @ Jan 21 2018, 02:53 PM) Knowing who you are, i'd say go with UBNT despite the fact that they dont hold up to their ads when used for what they're bought for. Their latest 8 port SFP+ router can only handle a couple of Gb/s when you use the other features the OS provide. i would recommend sublime. they are cheap and responsive compared to syncrowed. |
|
|
Jan 25 2018, 08:23 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(louislee1991 @ Jan 25 2018, 05:39 PM) i would recommend sublime. they are cheap and responsive compared to syncrowed. syncroweb also cheap |
|
|
Feb 13 2018, 10:24 PM
|
|
Senior Member
1,865 posts Joined: Jan 2003 From: XBOX Live
|
Question:
1. Would the Unifi AP wireless coverage be affected if I were to place it facing upwards the ceiling, rather than downfiring from the ceiling ? I'm trying to avoid any drilling on the concrete ceiling slab, not to mention the wiring too 2. As I am using Powerline as the main backbone around the house, do I need to have a separate PoE injector ? Does it come with the Unifi AP ? |
|
|
Feb 13 2018, 11:35 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(calvin @ Feb 13 2018, 10:24 PM) Question: 1) no.1. Would the Unifi AP wireless coverage be affected if I were to place it facing upwards the ceiling, rather than downfiring from the ceiling ? I'm trying to avoid any drilling on the concrete ceiling slab, not to mention the wiring too 2. As I am using Powerline as the main backbone around the house, do I need to have a separate PoE injector ? Does it come with the Unifi AP ? 2) its good not to mix networking cable with powerline. PoE comes with the AP. |
|
|
Feb 23 2018, 01:56 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
|
|
|
Feb 24 2018, 01:39 AM
|
|
Newbie
16 posts Joined: Dec 2009
|
QUOTE(pandera999 @ Feb 23 2018, 01:56 PM) It is also a speaker after all |
|
|
Feb 26 2018, 06:17 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(skull29 @ Feb 24 2018, 01:39 AM) It is also a speaker after all yea.. quite loud too |
|
|
Apr 1 2018, 12:32 AM
|
|
Junior Member
322 posts Joined: Jan 2008
|
QUOTE(pandera999 @ Jan 25 2018, 08:23 PM) syncroweb also cheap What about Advancedata? Looking at ER-X with US-8 as a starter project.This post has been edited by XPS: Apr 1 2018, 12:51 AM |
|
|
Apr 1 2018, 01:16 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(XPS @ Apr 1 2018, 12:32 AM) What about Advancedata? Looking at ER-X with US-8 as a starter project. more or less the same... |
|
|
Apr 2 2018, 01:33 AM
|
|
Junior Member
322 posts Joined: Jan 2008
|
Thoughts around ER-X versus USG with US-8 starting point. Wireless AC will follow later.
How easy or difficult it is to do the initial configuration via the GUI (withour getting into CLI) and ensure a solid firewall. No port forwading stuff etc just enough to get Unifi up and running. The other configuration stuff will come after some experiences with it. |
|
|
Apr 2 2018, 02:38 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(XPS @ Apr 2 2018, 01:33 AM) Thoughts around ER-X versus USG with US-8 starting point. Wireless AC will follow later. good thing with usg is, even though u have flat vlan... and u have guest portal.. its auto isolate guest network and internal network. meanwhile ERX, u need create different vlan... and u need to add cli to isolate certain IP range or port.How easy or difficult it is to do the initial configuration via the GUI (withour getting into CLI) and ensure a solid firewall. No port forwading stuff etc just enough to get Unifi up and running. The other configuration stuff will come after some experiences with it. if u can use USG (because u have US-8) that is even better.. jz dat.. erx way cheaper than USG. |
|
|
Apr 2 2018, 04:29 PM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(XPS @ Apr 2 2018, 01:33 AM) Thoughts around ER-X versus USG with US-8 starting point. Wireless AC will follow later. Most basic and semi advanced stuff can be done via gui on edgerouter these days. It even apply default firewall for u through the wizard.How easy or difficult it is to do the initial configuration via the GUI (withour getting into CLI) and ensure a solid firewall. No port forwading stuff etc just enough to get Unifi up and running. The other configuration stuff will come after some experiences with it. On the other side, so does usg. Its a lot prettier through the controller. Keep in mind, even usg need a little bit of cli if u want to configure advanced setup. If u could mention a little bit of your setup, i may able to point which one is better in your case. If i have to choose between the two, i still choose erx because of the price. Both can do the exact same thing, through both gui and cli. This post has been edited by wanttotree: Apr 2 2018, 04:30 PM |
|
|
Apr 2 2018, 11:39 PM
|
|
Junior Member
322 posts Joined: Jan 2008
|
QUOTE(wanttotree @ Apr 2 2018, 04:29 PM) Most basic and semi advanced stuff can be done via gui on edgerouter these days. It even apply default firewall for u through the wizard. Thank you. Been reading up a lot on unbt stuff. However until you actually play around with them its unlikely the subtle differences will be evident.On the other side, so does usg. Its a lot prettier through the controller. Keep in mind, even usg need a little bit of cli if u want to configure advanced setup. If u could mention a little bit of your setup, i may able to point which one is better in your case. If i have to choose between the two, i still choose erx because of the price. Both can do the exact same thing, through both gui and cli. Most technical reviewers recommend Edge Routers as it has more advanced configurations without going into the CLI. However, high end home network setups blogs tend to favour USG. That is in essence the conundrum. Perhaps the ER-X route is simpler, without the nice network status pane. Know a good source to get one? Thanks. This post has been edited by XPS: Apr 3 2018, 02:03 PM |
|
|
Apr 21 2018, 04:44 AM
|
Senior Member
1,139 posts Joined: Aug 2006
|
Completed my home network upgrade recently.
Ubiquiti Security Gateway, Unifi Cloudkey, Unifi Switch 8 60W x 2, UAP AC Pro x 2. Was using Asus Router AC RT68U x 2 (1 router & 1 AP) Performance wise: Seems like Asus better coverage and faster speedtest results. will try to tweak the unifi AP placement and see the results later. |
|
|
Apr 23 2018, 01:38 PM
|
|
Junior Member
321 posts Joined: Apr 2006 From: Klang | Shah Alam
|
Hey guys, so I just recently moved into a new place, and just recently installed Time @ 300 Mbps.
My thoughts were: Modem --> ER-X --> AP AC --> WiFi Devices Also desktops will hook straight up to the ER-X For a 900sqft apt that is very low density, I think the AP AC should be sufficient enough, but AC LR is an option. I probably will be against drilling my top ceiling and instead use some high strength 3M type sticker(?) for cable management as well as to keep the device on the ceiling. Alternative option was to have it mid wall mounted instead. Thoughts? |
|
|
Apr 23 2018, 02:15 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(pizzaboyj @ Apr 23 2018, 01:38 PM) Hey guys, so I just recently moved into a new place, and just recently installed Time @ 300 Mbps. no prob if its wall mount. ur ceiling is high?My thoughts were: Modem --> ER-X --> AP AC --> WiFi Devices Also desktops will hook straight up to the ER-X For a 900sqft apt that is very low density, I think the AP AC should be sufficient enough, but AC LR is an option. I probably will be against drilling my top ceiling and instead use some high strength 3M type sticker(?) for cable management as well as to keep the device on the ceiling. Alternative option was to have it mid wall mounted instead. Thoughts? |
|
|
Apr 25 2018, 04:58 PM
|
|
Junior Member
321 posts Joined: Apr 2006 From: Klang | Shah Alam
|
QUOTE(pandera999 @ Apr 23 2018, 02:15 PM) no prob if its wall mount. ur ceiling is high? i would say "standard" height, not abnormally high, i dont have specific dimensions though atm |
|
|
Apr 25 2018, 07:46 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(pizzaboyj @ Apr 25 2018, 04:58 PM) i would say "standard" height, not abnormally high, i dont have specific dimensions though atm I see.. |
|
|
Apr 25 2018, 07:50 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(R4yMoNd @ Apr 21 2018, 04:44 AM) Completed my home network upgrade recently. any result sharing? this must be interesting.. can post in UBNT forum.. and let the developer knows. Ubiquiti Security Gateway, Unifi Cloudkey, Unifi Switch 8 60W x 2, UAP AC Pro x 2. Was using Asus Router AC RT68U x 2 (1 router & 1 AP) Performance wise: Seems like Asus better coverage and faster speedtest results. will try to tweak the unifi AP placement and see the results later. |
|
|
Apr 25 2018, 11:34 PM
|
|
Senior Member
1,139 posts Joined: Aug 2006
|
QUOTE(pandera999 @ Apr 25 2018, 07:50 PM) any result sharing? this must be interesting.. can post in UBNT forum.. and let the developer knows. LEL. I joined the forum, but seems like many ppl only reading (post other question though)Manage to install SSL certificate on my cloudkey controller and also use own domain. able to access direct to cloudkey from WAN without need to go to unifi.ubnt So far quite reliable, in the end i lower down the power of my AP to medium, and only boost max for the AP which we use most of the time. some pic for the dashboard attached » Click to show Spoiler - click again to hide... « This post has been edited by R4yMoNd: Apr 25 2018, 11:49 PM |
|
|
Apr 25 2018, 11:47 PM
|
|
Senior Member
1,139 posts Joined: Aug 2006
|
QUOTE(pizzaboyj @ Apr 23 2018, 01:38 PM) Hey guys, so I just recently moved into a new place, and just recently installed Time @ 300 Mbps. 1. How do you run the utp/ethernet cable to the ceiling? unless you use cable tray or conduit or u fish the utp cable thru the lighting wiring.My thoughts were: Modem --> ER-X --> AP AC --> WiFi Devices Also desktops will hook straight up to the ER-X For a 900sqft apt that is very low density, I think the AP AC should be sufficient enough, but AC LR is an option. I probably will be against drilling my top ceiling and instead use some high strength 3M type sticker(?) for cable management as well as to keep the device on the ceiling. Alternative option was to have it mid wall mounted instead. Thoughts? 2. I prefer AC AP Pro, but for mid wall mounting I will go for AP Mesh (slim device with two antenna. good for wall mount) I attached the pic. 3. How many Lan port you have in the house? if you have additional LAN Port behind living room TV should be great. » Click to show Spoiler - click again to hide... « |
|
|
Apr 26 2018, 09:24 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(R4yMoNd @ Apr 25 2018, 11:34 PM) LEL. I joined the forum, but seems like many ppl only reading (post other question though) i see.....Manage to install SSL certificate on my cloudkey controller and also use own domain. able to access direct to cloudkey from WAN without need to go to unifi.ubnt So far quite reliable, in the end i lower down the power of my AP to medium, and only boost max for the AP which we use most of the time. some pic for the dashboard attached » Click to show Spoiler - click again to hide... « awesome.. btw... r u using TM UniFi? Maxis? or TIME? im curious what is result for dual WAN speedtest if using USG... because last time when use ERlite can get 100+100 = 200mb... now it detects 100 |
|
|
Apr 26 2018, 02:12 PM
|
|
Junior Member
321 posts Joined: Apr 2006 From: Klang | Shah Alam
|
QUOTE(R4yMoNd @ Apr 25 2018, 11:47 PM) 1. How do you run the utp/ethernet cable to the ceiling? unless you use cable tray or conduit or u fish the utp cable thru the lighting wiring. 1. yeah probably cable tray or fish through lighting wiring2. I prefer AC AP Pro, but for mid wall mounting I will go for AP Mesh (slim device with two antenna. good for wall mount) I attached the pic. 3. How many Lan port you have in the house? if you have additional LAN Port behind living room TV should be great. » Click to show Spoiler - click again to hide... « 3. 2 port, one behind living room TV is very central and seems like the perfect location for either a mid wall mounting right behind the TV |
|
|
Apr 27 2018, 10:20 PM
|
|
Senior Member
1,139 posts Joined: Aug 2006
|
QUOTE(pandera999 @ Apr 26 2018, 09:24 AM) i see..... I'm using Time at the moment, but hopefully able to add secondary ISP for testing purpose.awesome.. btw... r u using TM UniFi? Maxis? or TIME? im curious what is result for dual WAN speedtest if using USG... because last time when use ERlite can get 100+100 = 200mb... now it detects 100 Wrong config for your ERlite perhaps? how do you get the secondary wan? |
|
|
Apr 27 2018, 10:26 PM
|
|
Senior Member
1,139 posts Joined: Aug 2006
|
QUOTE(pizzaboyj @ Apr 26 2018, 02:12 PM) 1. yeah probably cable tray or fish through lighting wiring Consider AP AC in Wall as well.3. 2 port, one behind living room TV is very central and seems like the perfect location for either a mid wall mounting right behind the TV This wall type AP come with 2 Ethernet Port (1 Data with POE & 1 only for data) This will be useful if you need wired connectivity to your TV or TV box. or else you might place a switch over there. Ubiquiti USG, 1 AP AC in Wall, 1 AP AC Mesh (place it anywhere you want and set it as wireless) |
|
|
Apr 27 2018, 11:14 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(R4yMoNd @ Apr 27 2018, 10:20 PM) I'm using Time at the moment, but hopefully able to add secondary ISP for testing purpose. it just running on wizard... but then cli to remove pppoe.. cz tm have vlan tagging.Wrong config for your ERlite perhaps? how do you get the secondary wan? both are using TM ISP anyway. now waiting for ER6P coming.. then i will use 3 WAN.. This post has been edited by pandera999: Apr 27 2018, 11:15 PM |
|
|
Apr 30 2018, 07:29 PM
|
|
Junior Member
321 posts Joined: Apr 2006 From: Klang | Shah Alam
|
QUOTE(R4yMoNd @ Apr 27 2018, 10:26 PM) Consider AP AC in Wall as well. interesting, first time reading about the InWall solution... but is it available in MY though?This wall type AP come with 2 Ethernet Port (1 Data with POE & 1 only for data) This will be useful if you need wired connectivity to your TV or TV box. or else you might place a switch over there. Ubiquiti USG, 1 AP AC in Wall, 1 AP AC Mesh (place it anywhere you want and set it as wireless) |
|
|
May 1 2018, 08:45 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(pizzaboyj @ Apr 30 2018, 07:29 PM) interesting, first time reading about the InWall solution... but is it available in MY though? yea... now have AC version... running dual band simultaneously |
|
|
May 1 2018, 03:40 PM
|
|
Senior Member
1,139 posts Joined: Aug 2006
|
QUOTE(pizzaboyj @ Apr 30 2018, 07:29 PM) interesting, first time reading about the InWall solution... but is it available in MY though? https://store.ubnt.com/products/inwall-apyou can get it from sublime: https://www.lelong.com.my/uap-ac-iw-ubiquit...9-03-Sale-P.htm tell him raymond recommend. u might get discount |
|
|
May 1 2018, 07:28 PM
|
|
Junior Member
321 posts Joined: Apr 2006 From: Klang | Shah Alam
|
QUOTE(R4yMoNd @ May 1 2018, 03:40 PM) https://store.ubnt.com/products/inwall-ap hehe okok, erx vs usg though? i dont think im a very heavy user, mostly lots of video streaming, gaming, and the occasional torrent here and there, its more of getting exposed to UBNT myself, maybe i can start with erx and later on add in usg between erx and uap?you can get it from sublime: https://www.lelong.com.my/uap-ac-iw-ubiquit...9-03-Sale-P.htm tell him raymond recommend. u might get discount |
|
|
May 1 2018, 07:30 PM
|
|
Senior Member
1,139 posts Joined: Aug 2006
|
QUOTE(pizzaboyj @ May 1 2018, 07:28 PM) hehe okok, erx vs usg though? i dont think im a very heavy user, mostly lots of video streaming, gaming, and the occasional torrent here and there, its more of getting exposed to UBNT myself, maybe i can start with erx and later on add in usg between erx and uap? ill go with USG, Cloudkey, UAP AC in Wall, AC Mesh or AC Lite(USG function as router, DHCP server, managing vlan if you plan to use managed switch) the best part you can manage it from unifi controller This post has been edited by R4yMoNd: May 1 2018, 07:31 PM |
|
|
May 19 2018, 04:31 PM
|
|
Junior Member
612 posts Joined: Mar 2008
|
anyone know how to configure USG so it can become an inline device to see the dpi packet from modem to the router? i have been googling this but can find the thread till now
|
|
|
May 19 2018, 09:11 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(Gaara92 @ May 19 2018, 04:31 PM) anyone know how to configure USG so it can become an inline device to see the dpi packet from modem to the router? i have been googling this but can find the thread till now i tot you need to enable it.modem ---> USG ---> switch ----> AP unless you do, modem ---> wireless router --->USG (but still u can do dpi) ---> switch --->AP/machines |
|
|
May 28 2018, 02:58 PM
|
|
Junior Member
321 posts Joined: Apr 2006 From: Klang | Shah Alam
|
QUOTE(R4yMoNd @ May 1 2018, 07:30 PM) ill go with USG, Cloudkey, UAP AC in Wall, AC Mesh or AC Lite thanks but cant the ERX also be managed from the controller as well? only thing is the cloudkey which makes it not necessary to have your own vm with the controller instance(USG function as router, DHCP server, managing vlan if you plan to use managed switch) the best part you can manage it from unifi controller |
|
|
May 28 2018, 04:44 PM
|
|
Senior Member
1,820 posts Joined: May 2010 From: Kuala Lumpur
|
QUOTE(pizzaboyj @ May 28 2018, 02:58 PM) thanks but cant the ERX also be managed from the controller as well? only thing is the cloudkey which makes it not necessary to have your own vm with the controller instance I’m using ER-3 which afaik can’t be managed from the Unifi controller. But to be honest I don’t see this as an issue for a small home network.I have 2 APs (AC-Pro) which I haven’t bothered using the controller for since initial setup, and ER-3 is configured through the web interface. For a normal home network (2 NAS, 3 desktops, few tablets and mobile devices, 1 laptop) I couldn’t ask for more and don’t have any issues. I have a constant VPN tunnel running to office in UK (OpenVPN to a pair of ER-8) which is very reliable and I don’t recall it ever needing maintenance in the last year or so. |
|
|
May 28 2018, 06:47 PM
|
|
Junior Member
321 posts Joined: Apr 2006 From: Klang | Shah Alam
|
QUOTE(rjb123 @ May 28 2018, 04:44 PM) I’m using ER-3 which afaik can’t be managed from the Unifi controller. But to be honest I don’t see this as an issue for a small home network. yeah i think USG is overkill for me. maybe somewhere down the line. unified config interface is nice to have, but not a needed to start outI have 2 APs (AC-Pro) which I haven’t bothered using the controller for since initial setup, and ER-3 is configured through the web interface. For a normal home network (2 NAS, 3 desktops, few tablets and mobile devices, 1 laptop) I couldn’t ask for more and don’t have any issues. I have a constant VPN tunnel running to office in UK (OpenVPN to a pair of ER-8) which is very reliable and I don’t recall it ever needing maintenance in the last year or so. my current lineup looks like this: ERX UAP-AC-IW --> Desktop via Gigabit UAP-AC-IW --> HTPC via Gigabit APs will serve the mobiles and tablets Though I did come across the nanoHD which may have a wider range due to the higher Tx power on both 2.4GHz/5GHz compared to AC Pro, sadly doesnt look like its available yet |
|
|
May 28 2018, 08:17 PM
|
|
Senior Member
1,820 posts Joined: May 2010 From: Kuala Lumpur
|
QUOTE(pizzaboyj @ May 28 2018, 06:47 PM) yeah i think USG is overkill for me. maybe somewhere down the line. unified config interface is nice to have, but not a needed to start out Ah I’ve not faced any issues with WiFi speed to be honest - only high bandwidth usage I have is streaming 1080P content to iPad which works without issues. my current lineup looks like this: ERX UAP-AC-IW --> Desktop via Gigabit UAP-AC-IW --> HTPC via Gigabit APs will serve the mobiles and tablets Though I did come across the nanoHD which may have a wider range due to the higher Tx power on both 2.4GHz/5GHz compared to AC Pro, sadly doesnt look like its available yet I only stream 4K to TV, but that’s connected by cable anyway - so not looking at doing any WiFi upgrades (for now!) It works solidly all the time without needing rebooting or any changes - so if it’s not broken I won’t touch it |
|
|
Jul 8 2018, 04:51 PM
|
|
Senior Member
1,820 posts Joined: May 2010 From: Kuala Lumpur
|
Ordered a USG-PRO-4 and UAP-AC-HD today and a few other bits (including a 1U UPS and 9U rack, which I’m sure GF will be delighted at, lol)
|
|
|
Jul 8 2018, 06:46 PM
|
Junior Member
355 posts Joined: Sep 2004
|
Dear all,
need some advise, been researching on this topic but somehow i'm just abit confused on the products/model i should be using. i would like to extend the wifi from my parent's place to my home which is just few units from her place on the same road. There is line of sight at the balcony(though i think i need to extend the bar abit to achieve complete line of sight) so what should i be using to setup this up. HomeA Unifi - Modem- Router - Nanostation? HomeB Nanastation - Router ???? Thanks all. |
|
|
Jul 8 2018, 07:16 PM
|
Elite
4,541 posts Joined: Jan 2003 From: BSRPPG51 Access Concentrator
|
QUOTE(Acquiesce @ Jul 8 2018, 06:46 PM) Dear all, HomeBneed some advise, been researching on this topic but somehow i'm just abit confused on the products/model i should be using. i would like to extend the wifi from my parent's place to my home which is just few units from her place on the same road. There is line of sight at the balcony(though i think i need to extend the bar abit to achieve complete line of sight) so what should i be using to setup this up. HomeA Unifi - Modem- Router - Nanostation? HomeB Nanastation - Router ???? Thanks all. Nanastation - Switch/Access Point. No router in Home B, else it will make things complicated. |
|
|
Jul 9 2018, 10:53 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(Acquiesce @ Jul 8 2018, 06:46 PM) Dear all, the red i highlight above, you mean, extend the pole where nanostation will be mounted?need some advise, been researching on this topic but somehow i'm just abit confused on the products/model i should be using. i would like to extend the wifi from my parent's place to my home which is just few units from her place on the same road. There is line of sight at the balcony(though i think i need to extend the bar abit to achieve complete line of sight) so what should i be using to setup this up. HomeA Unifi - Modem- Router - Nanostation? HomeB Nanastation - Router ???? Thanks all. i recommend you to use Nanostation M5 as Nanostation M2 is based on 2.4G and its very congested and it will affecting speed as well. UniFi modem - Router - Nanostation } Home A Nanostation - Switch - Router/AP } Home B this is simple PTP setup. |
|
|
Jul 10 2018, 10:05 PM
|
|
Junior Member
355 posts Joined: Sep 2004
|
QUOTE(asellus @ Jul 8 2018, 07:16 PM) HomeB Thanks!Nanastation - Switch/Access Point. No router in Home B, else it will make things complicated. |
|
|
Jul 10 2018, 10:06 PM
|
|
Junior Member
355 posts Joined: Sep 2004
|
QUOTE(pandera999 @ Jul 9 2018, 10:53 AM) the red i highlight above, you mean, extend the pole where nanostation will be mounted? Thanks. i recommend you to use Nanostation M5 as Nanostation M2 is based on 2.4G and its very congested and it will affecting speed as well. UniFi modem - Router - Nanostation } Home A Nanostation - Switch - Router/AP } Home B this is simple PTP setup. shall i get nano beam? nano station? powerbeam ? there's quite a few not sure which is suitable. |
|
|
Jul 10 2018, 10:18 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(Acquiesce @ Jul 10 2018, 10:06 PM) Thanks. nanobeam or litebeam for ptp is good enough. nanostation m is kinda quite old.. so i guess can opted for nanobeam or litebeamshall i get nano beam? nano station? powerbeam ? there's quite a few not sure which is suitable. |
|
|
Jul 12 2018, 01:22 PM
|
|
Junior Member
306 posts Joined: Oct 2011
|
Hi can you propose which item to be used ? Present premises is 3,000 sft single floor condominium. Difficult to get wifi coverage all over the unit. Worse when we close the bedroom doors. Thanks.
|
|
|
Jul 12 2018, 08:30 PM
|
|
Elite
8,399 posts Joined: Jul 2008
|
QUOTE(a16791 @ Jul 12 2018, 01:22 PM) Hi can you propose which item to be used ? Present premises is 3,000 sft single floor condominium. Difficult to get wifi coverage all over the unit. Worse when we close the bedroom doors. Thanks. If you got the money to spend, the setup below will work really well. You will need Ethernet drops to connect the AP anyways. 3x UAP-AC-PRO, US-8-60W and USG hooked up to your existing ISP modem. For a lower budget solution, just get an Asus router and run powerline wireless extender. |
|
|
Jul 13 2018, 10:16 AM
|
|
Junior Member
306 posts Joined: Oct 2011
|
QUOTE(blacktubi @ Jul 12 2018, 08:30 PM) If you got the money to spend, the setup below will work really well. You will need Ethernet drops to connect the AP anyways. Thanks for the feedback. Want to rule out the option of pulling lan cables. Also powerline doesnt really work as unit as unit running 3 phase electricity. Any alternatives ?3x UAP-AC-PRO, US-8-60W and USG hooked up to your existing ISP modem. For a lower budget solution, just get an Asus router and run powerline wireless extender. |
|
|
Jul 13 2018, 11:30 AM
|
|
Junior Member
129 posts Joined: Jan 2003
|
FYI - expect that the UBNT Unifi range will become increasingly difficult to get in mainstream settings in the coming months. TM has successfully won a court case against a/the UBNT distributor barring them from selling products with the name Unifi in them as while it's a US trademarked product, Unifi is trademarked in Malaysia and may cause "confusion" as while one is a service and one is a product, they both are IT/networking/etc related.
|
|
|
Jul 13 2018, 12:43 PM
|
|
Junior Member
83 posts Joined: Mar 2017
|
QUOTE(Indecided @ Jul 13 2018, 12:30 PM) FYI - expect that the UBNT Unifi range will become increasingly difficult to get in mainstream settings in the coming months. TM has successfully won a court case against a/the UBNT distributor barring them from selling products with the name Unifi in them as while it's a US trademarked product, Unifi is trademarked in Malaysia and may cause "confusion" as while one is a service and one is a product, they both are IT/networking/etc related. true.... and longer waiting duration to get certain UniFi range. however, airMax, EdgeMax, airFiber is not affected. |
|
|
Jul 13 2018, 12:44 PM
|
|
Junior Member
83 posts Joined: Mar 2017
|
QUOTE(a16791 @ Jul 13 2018, 11:16 AM) Thanks for the feedback. Want to rule out the option of pulling lan cables. Also powerline doesnt really work as unit as unit running 3 phase electricity. Any alternatives ? This is quite hard. If Mesh Unit front the door and another Mesh unit inside the room how? |
|
|
Jul 13 2018, 12:46 PM
|
Junior Member
35 posts Joined: Mar 2017 From: Somewhere :3
|
QUOTE(Indecided @ Jul 13 2018, 11:30 AM) FYI - expect that the UBNT Unifi range will become increasingly difficult to get in mainstream settings in the coming months. TM has successfully won a court case against a/the UBNT distributor barring them from selling products with the name Unifi in them as while it's a US trademarked product, Unifi is trademarked in Malaysia and may cause "confusion" as while one is a service and one is a product, they both are IT/networking/etc related. Wow, the situation really became worse, last year, TM took down the UBNT Unifi app(for connecting to controller and managing AP) from the Play store because collide with their own app. If you want to download the app, there's a thread on the UBNT forums about it, https://community.ubnt.com/t5/UniFi-Wireles...ry/td-p/2114998 Haih.. like this also can.. is there any way to get around this? |
|
|
Jul 13 2018, 01:21 PM
|
|
Junior Member
306 posts Joined: Oct 2011
|
QUOTE(AdvNetwork @ Jul 13 2018, 12:44 PM) This is quite hard. If Mesh Unit front the door and another Mesh unit inside the room how? Ya. That's why asking for help here. |
|
|
Jul 13 2018, 01:36 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(a16791 @ Jul 13 2018, 01:21 PM) Ya. That's why asking for help here. i'm thinking UAP AC Mesh will may do help. |
|
|
Jul 13 2018, 01:53 PM
|
|
Junior Member
306 posts Joined: Oct 2011
|
QUOTE(pandera999 @ Jul 13 2018, 01:36 PM) i'm thinking UAP AC Mesh will may do help. Is this something like a wifi repeater / extender ?Currently router is place at area mark X in red. No signal / very weak signals in all the bedrooms when the doors are closed. 
|
|
|
Jul 13 2018, 02:07 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(a16791 @ Jul 13 2018, 01:53 PM) Is this something like a wifi repeater / extender ? Please refer to bottom link. It does work like repeater and extender. The only different is, these AP is centralized controlled. So it just one time configuration and easy compare when manage individual AP Currently router is place at area mark X in red. No signal / very weak signals in all the bedrooms when the doors are closed.
what router you use? and what kind of wall the house have? looks a bit spacey house UAP AC Mesh Explain This post has been edited by pandera999: Jul 13 2018, 02:08 PM |
|
|
Jul 13 2018, 02:56 PM
|
|
Junior Member
326 posts Joined: Jun 2008
|
will the new nanoHD be a good choice for gigaspeed connection compared to the LR or Pro
|
|
|
Jul 13 2018, 02:58 PM
|
|
Junior Member
321 posts Joined: Apr 2006 From: Klang | Shah Alam
|
QUOTE(mintgadget @ Jul 13 2018, 02:56 PM) will the new nanoHD be a good choice for gigaspeed connection compared to the LR or Pro probably the best bet, but you cant really get nanohd in malaysia atm right? |
|
|
Jul 13 2018, 03:00 PM
|
|
Junior Member
321 posts Joined: Apr 2006 From: Klang | Shah Alam
|
got my ERX couple of days ago and set it up, seems pretty straightforward, already massive improvement to my network, but looking to replace my archer c7 and c1200 with either 2x UAP AC or 2x nanoHD if they become available...
|
|
|
Jul 13 2018, 03:02 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(mintgadget @ Jul 13 2018, 02:56 PM) will the new nanoHD be a good choice for gigaspeed connection compared to the LR or Pro yes. its 4x4 on 5Ghz network.. it is good. but for 2.4Ghz.. it just 2x2. but these days... most mobile phone can support 5Ghz... so not an issue.. good for high dense connectivity that demand 5ghz connection.QUOTE(pizzaboyj @ Jul 13 2018, 02:58 PM) probably the best bet, but you cant really get nanohd in malaysia atm right? price wise have. yes... but the unit itself, i haven seen it yet. only UAP AC HD |
|
|
Jul 13 2018, 03:05 PM
|
|
Junior Member
326 posts Joined: Jun 2008
|
QUOTE(pizzaboyj @ Jul 13 2018, 02:58 PM) probably the best bet, but you cant really get nanohd in malaysia atm right? Nowadays you literally buy anything that is not available here right. Tried G3 flex now looking at the nanoHD am waiting for telco gigaspeed announcement. |
|
|
Jul 13 2018, 03:05 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(pizzaboyj @ Jul 13 2018, 03:00 PM) got my ERX couple of days ago and set it up, seems pretty straightforward, already massive improvement to my network, but looking to replace my archer c7 and c1200 with either 2x UAP AC or 2x nanoHD if they become available... i think UAP AC LR will do.. |
|
|
Jul 13 2018, 07:38 PM
|
|
Junior Member
306 posts Joined: Oct 2011
|
QUOTE(pandera999 @ Jul 13 2018, 02:07 PM) Please refer to bottom link. It does work like repeater and extender. The only different is, these AP is centralized controlled. So it just one time configuration and easy compare when manage individual AP Sorry. Stupid quiesrion. How does this device connects to my existing WiFi ? Do we use the app to select existing ssid than key in the password .what router you use? and what kind of wall the house have? looks a bit spacey house UAP AC Mesh Explain Now using d-link router provided by time. It’s a condominium around 3,000 sft. Last time when I do renovation the contractor got hard time drilling holes as he say the walls are dense. So I suspect this is reason why diff to get good signal. So u think this device able to provide the signal ? How about the uap ac pro ? Can I plug it to the existing time d-link router and it would solve the problem ? This post has been edited by a16791: Jul 13 2018, 08:44 PM |
|
|
Jul 31 2018, 12:32 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(a16791 @ Jul 13 2018, 07:38 PM) Sorry. Stupid quiesrion. How does this device connects to my existing WiFi ? Do we use the app to select existing ssid than key in the password . No, it do not solve your problem. ubnt mesh only works with ubnt products. and ubnt product is not the same as consumer AP. where you just simply combine with other brand and its hardwareNow using d-link router provided by time. It’s a condominium around 3,000 sft. Last time when I do renovation the contractor got hard time drilling holes as he say the walls are dense. So I suspect this is reason why diff to get good signal. So u think this device able to provide the signal ? How about the uap ac pro ? Can I plug it to the existing time d-link router and it would solve the problem ? i finish setup ubnt solution for my friend at KL apartment. he is using time+iptv, performance much better. using USG + US-8-150W + 4 UAP AC LR + cloud key solve his issue... |
|
|
Jul 31 2018, 12:34 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
|
|
|
Aug 1 2018, 04:30 PM
|
|
Senior Member
1,865 posts Joined: Jan 2003 From: XBOX Live
|
i'm trying to create a site-to-site vpn on USG with dynamic WAN address on both ends
challenge is the GUI does not support FQDN definition for the peer has anyone had success with such a scenario ? btw only one end is USG, where another end is on another solution. |
|
|
Aug 1 2018, 04:37 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(calvin @ Aug 1 2018, 04:30 PM) i'm trying to create a site-to-site vpn on USG with dynamic WAN address on both ends if i not mistaken.... need to edit json file... was curious about this too... challenge is the GUI does not support FQDN definition for the peer has anyone had success with such a scenario ? btw only one end is USG, where another end is on another solution. |
|
|
Aug 1 2018, 05:17 PM
|
|
Senior Member
1,865 posts Joined: Jan 2003 From: XBOX Live
|
QUOTE(pandera999 @ Aug 1 2018, 04:37 PM) if i not mistaken.... need to edit json file... was curious about this too... tried many ways and its a hair pulling experience  |
|
|
Aug 2 2018, 10:58 AM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(calvin @ Aug 1 2018, 05:17 PM) tried many ways and its a hair pulling experience Some of the guy told me do this. if you have USG at both endCODE if you had one controller with multiple sites then it is easy to set up site to site vpn withough messing arround with dns or static ips with seperate controllers it is harder. but with them on the same controller the sites use the controller to locate the ip for the far end of the VPN |
|
|
Aug 15 2018, 04:38 PM
|
|
Junior Member
317 posts Joined: Jan 2008 From: Your Face.
|
sifu2 sekalian, one question, i'm in the midst of setting up a new network for my new home.
will tm unifi be able to work with this setup? or must use Edge Router? The reason i chose USG is because all the other products in the environment is from UniFi line.. and i read in the forums USG is more friendly in terms of the GUI. But i'm open to ideas, appreciate the input from experts here.. TM modem -> USG -> US-24-500W -> UAP-AC-LR / PRO |
|
|
Aug 15 2018, 07:08 PM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(ee7han @ Aug 15 2018, 04:38 PM) sifu2 sekalian, one question, i'm in the midst of setting up a new network for my new home. Yes sir u can setup pppoe through vlan on usg to work with tm unifi. Usg and edgerouter lite is basically the same hardware. Usg has gui interface running on a controller. Pretty and somewhat easy to figure out. Usg and erlite will perform exactly the same. Usg has prettier interface while having higher price. Erlite isnt as pretty hardware and software wise, but it too is easy to setup. A few clicks away through the built in wizard and u r up and running like a flash. Checkout my tutorial if u need some head start. Either one will be a great buy. Cheerswill tm unifi be able to work with this setup? or must use Edge Router? The reason i chose USG is because all the other products in the environment is from UniFi line.. and i read in the forums USG is more friendly in terms of the GUI. But i'm open to ideas, appreciate the input from experts here.. TM modem -> USG -> US-24-500W -> UAP-AC-LR / PRO This post has been edited by wanttotree: Aug 15 2018, 07:09 PM |
|
|
Aug 16 2018, 03:00 PM
|
|
Junior Member
317 posts Joined: Jan 2008 From: Your Face.
|
QUOTE(wanttotree @ Aug 15 2018, 07:08 PM) Yes sir u can setup pppoe through vlan on usg to work with tm unifi. Usg and edgerouter lite is basically the same hardware. Usg has gui interface running on a controller. Pretty and somewhat easy to figure out. Usg and erlite will perform exactly the same. Usg has prettier interface while having higher price. Erlite isnt as pretty hardware and software wise, but it too is easy to setup. A few clicks away through the built in wizard and u r up and running like a flash. Checkout my tutorial if u need some head start. Either one will be a great buy. Cheers wonderful, thank you so much !! |
|
|
Aug 16 2018, 04:53 PM
|
|
Junior Member
78 posts Joined: Feb 2012
|
QUOTE(calvin @ Aug 1 2018, 04:30 PM) i'm trying to create a site-to-site vpn on USG with dynamic WAN address on both ends This will never work,challenge is the GUI does not support FQDN definition for the peer has anyone had success with such a scenario ? btw only one end is USG, where another end is on another solution.u need at lease 1 side with static IP for the dynamic to initiate the connection. |
|
|
Aug 19 2018, 02:11 PM
Show posts by this member only | IPv6 | Post
#490
|
|
Junior Member
864 posts Joined: May 2005
|
Guys, I'm planning to buy EdgeRouter X to replace my existing TP-Link C1200. Something like this:
 1. The C1200 currently has to be put inside store room bcoz fibre endpoint & my in-wall LAN points are there, reducing Wifi strength downstairs. 2. Will the above setup work? 3. I want to at least be able to view traffic utilisation & connected devices. 4. Initially interested towards Mikrotik HEX router + Dude server, but tuned off by its Windows-95-feel GUI. 5. I read that EdgeRouter can use Ubiquiti's UNMS, which look similar to Unifi Controller software that I'm very impressed with. 6. Can I use UNMS to monitor my network with just EdgeRouter X? Thanks. |
|
|
Aug 21 2018, 11:42 AM
|
|
Junior Member
677 posts Joined: Apr 2008
|
QUOTE(taqu @ Aug 19 2018, 02:11 PM) Guys, I'm planning to buy EdgeRouter X to replace my existing TP-Link C1200. Something like this: 1) setting up a wired router is always the best scenario. Then followed by descent ap(s). which is totally fine in your case1. The C1200 currently has to be put inside store room bcoz fibre endpoint & my in-wall LAN points are there, reducing Wifi strength downstairs. 2. Will the above setup work? 3. I want to at least be able to view traffic utilisation & connected devices. 4. Initially interested towards Mikrotik HEX router + Dude server, but tuned off by its Windows-95-feel GUI. 5. I read that EdgeRouter can use Ubiquiti's UNMS, which look similar to Unifi Controller software that I'm very impressed with. 6. Can I use UNMS to monitor my network with just EdgeRouter X? Thanks. 2) yes it will work fine 3) Through edgerouter gui yes. 4) i have to agree with you about the gui. but if ur talking performance its a whole other story. i have to say hex is a more powerful device overall. but i love ubiquiti for being based off vyatta as i can install a ton of packages. so far i have both ubiquiti and mikrotik, and i find it hard to choose a favourite. anyways, i digress. 5) i will leave this for other guys to answer as i never use one (yet) 6) as stated above. |
|
|
Aug 21 2018, 12:01 PM
|
|
Senior Member
5,714 posts Joined: Mar 2007
|
QUOTE(taqu @ Aug 19 2018, 02:11 PM) Guys, I'm planning to buy EdgeRouter X to replace my existing TP-Link C1200. Something like this: If I were you, I would use the Ubiquiti UAP AC Pro as AP, and make it a full Ubiquiti system in your house, which you can manage in a central manner rather than using three separate routers that is converted to an AP.1. The C1200 currently has to be put inside store room bcoz fibre endpoint & my in-wall LAN points are there, reducing Wifi strength downstairs. 2. Will the above setup work? 3. I want to at least be able to view traffic utilisation & connected devices. 4. Initially interested towards Mikrotik HEX router + Dude server, but tuned off by its Windows-95-feel GUI. 5. I read that EdgeRouter can use Ubiquiti's UNMS, which look similar to Unifi Controller software that I'm very impressed with. 6. Can I use UNMS to monitor my network with just EdgeRouter X? Thanks. |
|
|
Aug 21 2018, 02:08 PM
|
|
Junior Member
864 posts Joined: May 2005
|
Thanks wanttotree for the feedback.
QUOTE(SilentVampire @ Aug 21 2018, 12:01 PM) If I were you, I would use the Ubiquiti UAP AC Pro as AP, and make it a full Ubiquiti system in your house, which you can manage in a central manner rather than using three separate routers that is converted to an AP. Ideally would like to do that, but USG is RM200 more expensive. I'd like to start at router level first. Hopefully the new UNMS will be more like Controller software. |
|
|
Aug 21 2018, 02:38 PM
|
|
Senior Member
5,714 posts Joined: Mar 2007
|
QUOTE(taqu @ Aug 21 2018, 02:08 PM) Thanks wanttotree for the feedback. Fair enough, you have to see if it fits into what you want.Ideally would like to do that, but USG is RM200 more expensive. I'd like to start at router level first. Hopefully the new UNMS will be more like Controller software. |
|
|
Aug 25 2018, 11:32 PM
|
Junior Member
269 posts Joined: Aug 2011
|
QUOTE(taqu @ Aug 19 2018, 02:11 PM) Guys, I'm planning to buy EdgeRouter X to replace my existing TP-Link C1200. Something like this: Curious of your UMNS VM, how actually you do on it?1. The C1200 currently has to be put inside store room bcoz fibre endpoint & my in-wall LAN points are there, reducing Wifi strength downstairs. 2. Will the above setup work? 3. I want to at least be able to view traffic utilisation & connected devices. 4. Initially interested towards Mikrotik HEX router + Dude server, but tuned off by its Windows-95-feel GUI. 5. I read that EdgeRouter can use Ubiquiti's UNMS, which look similar to Unifi Controller software that I'm very impressed with. 6. Can I use UNMS to monitor my network with just EdgeRouter X? Thanks. This post has been edited by war3boy: Aug 26 2018, 02:24 PM |
|
|
Aug 27 2018, 07:05 AM
|
Senior Member
1,127 posts Joined: Jan 2003
|
|
|
|
Aug 27 2018, 08:49 AM
Show posts by this member only | IPv6 | Post
#497
|
|
Senior Member
1,873 posts Joined: Nov 2010
|
QUOTE(cyberic @ Aug 27 2018, 07:05 AM) Go buy it, got 20% MAX -RM 80 discount voucher. LAZEL20 |
|
|
Aug 27 2018, 01:08 PM
|
|
Senior Member
1,040 posts Joined: Mar 2006
|
Hey guy,
I just want let ERLite-3 go due to not familiar with the configuration. Any interested ? Thanks |
|
|
Sep 9 2018, 08:39 PM
|
Senior Member
1,719 posts Joined: Oct 2004 From: Third rock from the sun
|
hi guys, i'm planning to get a AC-LR for mounting on my new house ground floor ceiling. Then i planning to use the free wifi router from Unifi (if any) to setup the same SSID on my first floor. Is it possible? Any issues for using different brand of APs?
Also how is this compared to mesh APs? i have not research much on mesh but seeing hte price tag have put me away from them... Thanks for the advise |
|
|
Sep 9 2018, 09:01 PM
|
|
Senior Member
6,214 posts Joined: Sep 2010 From: Busan, Kr | Kuching, Swk
|
QUOTE(lencent @ Sep 9 2018, 08:39 PM) hi guys, i'm planning to get a AC-LR for mounting on my new house ground floor ceiling. Then i planning to use the free wifi router from Unifi (if any) to setup the same SSID on my first floor. Is it possible? Any issues for using different brand of APs? LR provide much wide range coverage.. if i not mistaken (need to recheck) AC LR have 3x3 mimo on 2.4Gz compare 2x2 mimo on 2.4Gz in AP Mesh. its good to get AC LR if you plan indoor deployment.Also how is this compared to mesh APs? i have not research much on mesh but seeing hte price tag have put me away from them... Thanks for the advise regarding on setting same SSID, i think dats fine.. maybe it works. |
| Change to: |  0.2769sec
 0.74
 6 queries
 GZIP Disabled
Time is now: 29th November 2025 - 01:10 PM |
Quote
