Another 'Leak proof' vape setup option is Evic AIO an all in one vape gear. Plus.. it can easily be converted to regular mod that allows you to use ur own fav tank.

Hate or dunno how to coil? No problem. JT does hv not less 6 or 8 diff occ - (mtl or dl) that u can easily buy cheap2 online.

Oh.. Its QCS coil is gooding as well. Just make sure u fill the tank as shown in d guide. Otherwise it would spit back at u for being lazy to look at d guide and act memandai beruk..Lol.

I personally never encounter isu of tank always 'kencing' on me. Leaked once or 2x maybe but soon after proper wicking applied all are gooding.

Evic AIO selling @less RM210. Got mine from lelong. Tis 75w TC AIO looks much2 nicer in real life than in pix. http://www.lelong.com.my/joyetech-evic-aio...7-01-Sale-I.htm

Here I attached pixs for size comparisons between some JT mods i own.

Need fancy ss316L coils? Why not choose UD's pre-built coils?
Here, same seller also sells:-
a. Pre-built SS316L Clapton Wire
b. UD-pre-built staggered fused clapton wire
Many more option. Goto http://www.lelong.com.my/merchant/finestou...C1-245445-1.htm



This post has been edited by MatShadow: Sep 10 2016, 06:10 PM

a. Wrong link.
b. These fancy pre-made coil are not well made, I mean you still can vape it I suppose, You can go ahead and try it if you like. But if you see these type of coil usually the outer wire will always be 32g. It's not that clean looking.

This post has been edited by 6oLsh0i_6o0z3: Sep 10 2016, 01:30 PM

nice one.. how about those non top fill tank? any special tricks?

This post has been edited by gunners_my: Sep 10 2016, 02:49 PM

Mod nie ade bonus yg tak dijangka...ia mempunyai potensi daya penarik awek/amoi. I'm serious!
Biasanya i pakai triade kat rumah aje, tapi dah 3 kali i bawanya lepak kat kedai kopi dgn member. The unexpected results were most gratifying
If Vios is the godcar, then I have to call this the godmod!

Jangan poison sgt boss. I look everywhere still not find wor. Lastly ask a vape shop to reserve for me once arrive. Can't wait to get mine. 😁

use rda lor no leaking issue, to avoid juice leak out u have to clean ur tank, drip tips because after couple of hour there will be left over juice all over the tank either u blow it down back to well or u take out the cap and wipe of the juice to prevent juice spill out. No idea with rta but rda no leaking. For tank that has air flow at bottom u will have juice that spill out under the airflow well after long hour is it normal. To prevent it blow in a few time to force juice came out from the well and wipe it off then u will have zero juice spill issue but leaking from glass, top fill then is something wrong with ur wicking nothing to do with the tank.

Ahahahah Triade is a GodMod.....

hhmm wanna learn more about on how to use + setup DNA200, tp tak jumpa any proper how-to's especially for a noobie like me ( never really into TC bla bla bla, all this while Kanthal 26 single coil aje ).

Sold out everywhere? Wah...memang kuat daya penariknyaa. Hope u get one soon!

GodMod requires us to study hard and train first.....

https://downloads.evolvapor.com/escribe/guide/story.html
https://downloads.evolvapor.com/escribe/EScribeManual.pdf
https://evolvapor.forumchitchat.com/categories

I got a mini serpent. What should I build for it? For flavour or clouds advices all welcome. Firing with dna75 but dk how use it. I have 24 26 28g ss316l and 22g kanyhsl a1

Adui to use this GodMod, downloading + connecting the mod to eScribe is a must ke?

If you want to get the best performance out of that chip, you'll have to put in some effort. IMO the results of tweaking the mod to your satisfaction make it all worthwhile!

At first it may seem like a lot of work, but once u get familiar with it all, it's really not much of a problem. I'll put the links to 2 "quickstart" guides below, but urge you to learn the chip thoroughly when u have time.

https://www.e-cigarette-forum.com/forum/blo...ientist.136036/

oooo i have the fear of tweaking electronic stuffs lol. takpa2 nanti suda beli tfv8 i give it a shot hehe

How to replace this IPV 6x in Malaysia? Apparently, this model has been recalled in USA.

No idea. Do we have an official Pioneer distributor here to even start such a thing? If not you have to contact them directly ler... though knowing how they operate, good luck with that.

Also, FT if you got it from them.

TBH though, the recall is probably due to the Reverse Polarity thing... or rather the lack of it. As long as you don't insert your batts the wrong way around, you'll be fine.

If you do... well... hopefully you have somewhere safe you can throw that pipe bomb to lol (jk). But really, you'll probably just end up with a dead mod nobody wants to warranty.

This post has been edited by Eiraku: Sep 12 2016, 07:01 PM

Wats subohms lol

Just started to vape like 3 weeeks back. Looking for somethings for starters

is it u do multiple draws in quick succession on your atty ? For me when I want a fast hit I will quickly draw until the tank is hot - there is a lot of vapor that will condense back onto the mouthpiece and will backflow into the air hole - this will cause leak. If i slow vape (draw every few seconds, like when i makan with friends) then wont have leak.

yup.. i do that at times... maybe.. will take note in the future...

btw.. air flow and wattage any helps in reducing leaks? some told me that higher wattage will reduce condense.. correct?

Again it depends A LOT on various factors so it's not really easy to say. Atty design, wicking, cotton type, wattage, your juice viscosity, how you vape... and the near infinate combination of these factors summore.

Personally, I stick with the 'Cado for this very reason: It doesn't give me "leaks" that I can't explain. As long as I keep the wicking solid and the whole thing above horizontal, it will never "leak", thanks to the juice reservoir being BELOW the coils.

Plus the whole "Genny" setup means fuss-free maintenance... I just need to pop the cap off to brush the coils with q-tips to "degunk" it and wallah, it's usable for yet another week (I've been with this coil + cotton for nearly a month now).

That said, in terms of leaks (or rather the lack if it) the upcoming Goblin Mini v3 looks promising as it has both a covered AFC AND juice control.

This post has been edited by Eiraku: Sep 13 2016, 04:36 PM

bro.. "As long as I keep the wicking solid and the whole thing above horizontal".. horizontal means we can't lie down tank easily? correct me if I am wrong...

Goblin mini 3... ... must explore then.. thanks for the info

This post has been edited by gunners_my: Sep 13 2016, 03:58 PM