Before pass my alza to my friend, already clock 190k km, maintenance wise

1. Change all 4 tyre 3 times
2. Change front brake pad 3 times
3. Change full set absorber with mounting at 100k km
4. Change atf every 20k or 30k km
5. Normal service every 10k km
6. Numerous times change headlight and foglamp bulb before installing voltage stabilizer and grounding cable
7. Change floorboard carpet due to water seep in from buzzer wiring

Iinm my alza dont have any other big issue

To improve wind noise and sound insulation, me do

1. Install door sound proofing
2. Install extra rubber weatherstrip at all 4 door

Satisfy with my alza during my usage eventhough cannot compare with my opel zafira becoz different segment

I'm facelift SE user. Now 83+k km
1st set tyre till about 73k km
Change one fog lamp bulb and one headlight bulb (able to claim from sc ?)
Two sets of brake pads from outside sc.
Rattling solved quite early, now no more
Middle row seat adjustment lever screw came out twice. Now ok.
No modification. All is fine till now
Service and price is acceptable.

The common issues are captured here and brought forward from the previous thread.

I have 1st gen version Alza, clocking 5 year now this month with 120k km.
No major issues so far and maintenance is very affordable (*outside)

1. Tyres = currently 4th set (with the 1st set ori tyres running <10k)
2. brake pads = front change 3 times, rear 1 time
3. absorbers = 1 time at 80k km
4. Change atf every 20k or 30k km
5. Normal service every 7-10k km, depending what oil using.
6. water pump = changed at 70k due to bearing sound and slight leaking.
7. Coolant = changed 1 time at 80k (DIY)
8. Battery = 3rd unit now, normally changed every 2 years.
9. Buzzer wiring - flooding the driver side floor, DIY checking.. will check next round as raining season now.
10. wheel alignment + balancing every 8-10k.
11. cabin filter - changed every year. 
12. light bulbs - 3 pcs so far if remembered correctly (using Osram/Philips/Bosch)
13. Engine V belt - changed during the water pump changed.

Engine - stock with hotbits extractor.
Body - front strut bar, pivot voltage stabilizer, grounding
Body - sound proofing on doors, roof and side sills.  wheel arch bitumen sprays.
Rim - changed rims as ori 2 rims bengkok.

Mr DIY? Lazada?
One of the reason I bought SE is because the preference of the seats, compared to standard and advance variants.

Cool Leather.. found one in GM Klang..I think about rm250 kua.

you can try google it.. there should be many to choose.

the Cool Leather is not leather...fabric as I am using one.

You try search cool leather to see the look.  if want to feel it, GM klang has it and provide installation if needed.