Hi, need to ask something.

My father has first generation Alza.
Why the car can move even Parking is applied.

Is it the parking brake pad rosak?

Thanks.

Hi, yes.
Actually I drove my father's car to school every weekdays.
One day in neutral and parking brake applied.
Turned the steering wheel then the car move forward. At least I brake on time.

You mean press brake slowly and release it? Will try out one day.
Last week, I forgot to release Parking Brake and drive over until I hear the beep sound then only release brake. '
I sense that Parking Brake not working as it still moves while applied.

Thanks.

Hi, does anyone here know what's the size of the light bulb for clearance light? The small light.
Any link to buy. Got led type will do. White light will a bonus.

How to remove it from the fixture. I managed to take out by rotating 45 degrees and unable to take out.
Wish to fix new clearance light by myself. Ask the shop to fix quite expensive there.

Thanks.

Yes. Pull out bulb tip right?

Thanks.

OK. Thanks.

Is Osram T10 recommended?

Number plate light and interior light same as T10?

Thanks.

For the main one is what size? H4 or H7?

Thanks for the info.

How about Personal Lights, Room Light and Luggage light?
T10 can fit into number plate?

Thanks.

Thanks bro. Appreciate your effort.

Low and high speed beam using the same bulb?

For the T10, I thought only have one length.
Cool white or Sky White is better?
Your car now using LED for everything?

The fog lamp is what size, forgot to ask.

Thanks.

Thanks bro.

Regarding the room light and luggage light.
Can use Festoon 31mm?

Thanks.

You use Night Breaker Unlimited for both low beam and high beam light?
Is is brighter than stock headlamp?
My car low beam light not bright enough, cannot see the road,can see straight only.
Need to switch fog lamp only can see the road.

Mind to share out the photos, wanna see how bright is OSRAM T10 Cool White and Night Breaker Unlimited.

Thanks.

Thanks for the info.
How to fix the T10 to number plate lights.
Quite difficult to fix.
Tried to exchange with clearance light, accidentally drop the bulb and broke it.
How to remove the broken bulb?

Can see the road without fog lamp?
Will adjust down a bit.

Thanks for the info.

Thanks for the info.

For the high beam and indicator light need to take whole thing to replace?

BTW, do you know how to fix number plate lights?
Can take out but difficult to put in.

Thanks.

Thanks for the advice. How do I remove without using vacuum?
We don't have battery operated vacuum.
Best to fix lamp with back door closed or open? I tried fixing back while the lamp facing straight to me. Difficult to fix. If the lamp holder at the top position will be easier.

Appreciate your effort.
So, your car Alza now without cover?

Oh, tried shaking it and it won't help. Cannot use selo method. The glass bulb cut my finger this morning.
Do Perodua have new spare part for the clearance light. The long black thing like replace whole fixture?
Tried using pliers until broke the black thing. The top position already.
I can use vacuum cleaner but I stay in condominium that's the main problem.

The old type fully made of glass. I tried to break the glass by using pliers and accidentally cut the back thing that around the tip of the bulb.
My car already 5 years. One side spoil, I shouldn't left the lamp holder on top of the engine.
Wanna try can use. Fully plugged in but no light. Kept sweating until I gave up.

Thanks.

I use pliers because can break the glass. I thought the glass can broken easily but this kind of glass is different.
Using vacuum cleaner is not one of the option that I can use. I stay in condo. Park my car outside.

The connector is already stuck there. If I use hand, the glass will cut my fingers. This morning got bleed but very less only. Not that kind of serious. Now almost night. Can I send the picture tomorrow morning. Previously the clearance lamp that got stuck. Lamp faulty already. Wanna change to LED until I made a huge mistake today.

Might need to replace the whole black thing. I have made careless mistake of not handling the bulb properly.
I should fix back to its holder before testing out. I took one from number plate, tried fixing back, won't lit then exchange with the clearance lamp.
Accidentally drop, didn't place properly on the flat surface around the engine compartment.

Not only want to break the glass. I tried to use the pliers to pull the bulb from the connector but too tight.

Thanks.

This post has been edited by FusionXY: Jun 27 2019, 07:25 PM

Oh, I tried to to use a small negative screwdriver can break out everything.
I sweat very fast, tomorrow might to use a chair to sit and break out everything.
The top position broke out already. Just left the connector is stuck to the base.
Will post a picture tomorrow morning to show you. I'm afraid that will break everything and unusable.
Need to take out from another side to test out whether working or not. For the number plate light will fix OSRAM T10 Sky White.
Now plate number light one side no light. Any side will lit up or one side only. The plate number light need time to fix in.
If clearance lamp cannot lit up even with new bulb. Might need a replacement.
The Main Light change later, changed before, after changed worse than original stock bulb. The new bulb also halogen.
Not LED. Trying to fix myself, haizzz, damaged one stock.

Thanks.

Thanks for trying your best to help.

I really appreciate and giving you a big thanks for solving my problems.

Thanks.

Thanks for the advice.

Will try it out one day.

Thanks so much.

UPDATE:

Managed to break the connector.
Switch light bulb and still works.
Still need to tap the headlight glass to switch it on.

Thanks.

Thanks the help bro.
Appreciate that you help me so hard.

Will buy new T10 OSRAM Sky White to replace the number plate lights.
Exchange one of the number plate lights to one of the clearance lamp.
Will check again later need to tap the glass outside the lamp.

My surprise was that still can fix in and lock.