Below 50km, the range meter will show '---', cannot estimate, heart beat will dub dab faster ha ha

Pre fl alza can use same size brake pad as proton waja.

Fl alza use same size brake pad as vios.

Many brand to choose from, last time me using p2 brake pad buy at spare part but seems not as good as pre install from factory.

Use proride brake pad 1 time, good grip but harder on the disc

Can ask upholstery shop but dont think have ready made cover

Better still also install reverse camera and roof camera.

Also if you want to monitor engine temperature, can install temp meter. Pic from my kancil. Bought the meter from forklift spare part shop. Cost below rm200 with adapter and installation




Attached thumbnail(s)

Try go to main branch p2 sc, not p2 service dealer or small branch

Acc shop normally put 1 layer aluminium sheet inside roof to tighten screw to make sure monitor didnt dangling

Had a chat with alza owner, own alza for 5 years. He said that his alza cannot bring long item becos 2nd row seat not fully flat. Had to use his suv to bring long item.

Show him how to set 2nd row fully flat by pulling small tab behind 2nd row seat. And he said...."whoaaa.....5 years using alza but dunno that small tab for what ha ha"

5 years and didnt notice there's instruction sticker beside 2nd row seat...cannot imagine


Attached thumbnail(s)

Why dont you put carpet there and you cannot see the seat anymore.

If you dismantled 3rd row, the bonnet shape will be akward i guess since not flat anymore


Attached thumbnail(s)

It can be done. Seeing it while p2 foreman diassmmble all seat and change carpet bcoZ of flooding in my alza

Before pass my alza to my friend, already clock 190k km, maintenance wise

1. Change all 4 tyre 3 times
2. Change front brake pad 3 times
3. Change full set absorber with mounting at 100k km
4. Change atf every 20k or 30k km
5. Normal service every 10k km
6. Numerous times change headlight and foglamp bulb before installing voltage stabilizer and grounding cable
7. Change floorboard carpet due to water seep in from buzzer wiring

Iinm my alza dont have any other big issue

To improve wind noise and sound insulation, me do

1. Install door sound proofing
2. Install extra rubber weatherstrip at all 4 door

Satisfy with my alza during my usage eventhough cannot compare with my opel zafira becoz different segment

Try change brake pedal hose to steel braided, it will not improve "makan" but it will improve brake pedal feel, easier to manipulate brake pressure.

Also try flushing brake fluid and adjust rear brake shoe to make it more "makan"

isn't it will be hassle to mount/dismount your sjcam compared to dashcam which is fixed to your car

1. Connected
2. Can, normally accessories shop know how to do it

from fb


Attached thumbnail(s)

bendix got better grip at the expense eat your disc. Dunno about castrol transmax

me change absorber and absorber mounting at 100k km, change at p2sc, using original part, cost around rm600-rm700 iinm, 2014 price.

Before that try using proride, better handling but after 3 month k.o already. Thats why me change back to ori abs, reliability more important for me than slightly improve handling

iinm kayaba

change it at p2 becoz proride absorber installer damage my rubber spring holder, have to order at p2 becoz normal spare part shop didnt have stock.

And at that time p2 got service promo, all in with absorber, absorber mounting, rubber for spring holder and labour charge not more than rm700 iinm. Dunno cheap or not becoz proride abs price also more or less the same.

Proride abs got 6 month warranty but didnt bother to claim becoz use 3 month k.o already, dont want the hassle to claim and k.o again

Change ori abs at 100k km, still good until i swap my alza with my friend at 190k km

if follow manual, not advise speed more than 120 iinm. You will hear tornado at your alza roof ha ha.

Me using thule ranger 90 at my other car, sometimes speed more than 140, other than excessive wind noise, all is ok but please make sure all clamp are tight

This post has been edited by cleaner: Dec 6 2016, 12:29 AM

when the last time change atf, try to change atf first