Intel® Core(tm)2 Duo/Quad Overclocked Rev. 2, Going beyond factory limits
|
|
 Dec 15 2006, 10:06 AM
|
 
Senior Member
925 posts Joined: Jan 2005 From: depan lcd...dalam bilik..sekitar cyberjaya...  
|
taken from xtremesystems...E6600 + Biostar 965 DLX can do 585 fsb...n as i know this mobo can support until 600max
|
Quote|
|
|
|
|
Dec 15 2006, 01:31 PM
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk  
|
QUOTE(flatfinger @ Dec 15 2006, 09:01 AM) did u do the vdimm mod using resistor n fan header to get it above 2.2v??? yup    vr to fan header & test using dmm |
|
|
Dec 15 2006, 09:12 PM
|
Senior Member
614 posts Joined: Jan 2003
|
My target (maximum) is E6300@ 2.8GHz.......with 2GB RAM
What is the cheapest solution????? Must the RAM run at 800Mhz to achieve 2.8GHz on CPU or i can run my RAM at 667Mhz but still achieve 2.8GHz on CPU???? very new to overclocking..... |
|
|
Dec 15 2006, 10:21 PM
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(mcat84 @ Dec 15 2006, 09:12 PM) My target (maximum) is E6300@ 2.8GHz.......with 2GB RAM Yes, u must o'c your RAM to 800Mhz. Set the RAM multiplier to 2x,What is the cheapest solution????? Must the RAM run at 800Mhz to achieve 2.8GHz on CPU or i can run my RAM at 667Mhz but still achieve 2.8GHz on CPU???? very new to overclocking..... become 400x 2 = 800Mhz. |
|
|
Dec 15 2006, 11:46 PM
|
Junior Member
324 posts Joined: Jan 2003 From: KL
|
Biostar 965 DLX/965PT got C2? From the review, this board seem on pair wif DS3
This post has been edited by prescott: Dec 16 2006, 01:39 AM |
|
|
Dec 16 2006, 01:08 AM
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya 
|
QUOTE(flatfinger @ Dec 15 2006, 10:06 AM) taken from xtremesystems...E6600 + Biostar 965 DLX can do 585 fsb...n as i know this mobo can support until 600max well then aim for it! i see ur E6400 oced pretty well  QUOTE(rlhc17 @ Dec 15 2006, 01:31 PM) yup hihi.. so which one u like most, biostar or ur current abit? vr to fan header & test using dmm  |
|
|
|
|
|
Dec 16 2006, 10:19 AM
|
Senior Member
2,378 posts Joined: Jan 2003 From: Miri,Sarawak,Malaysia Status: Dead!
|
Yesterday I went up to Brunei and went to a couple of computer shops there. And one of them sells a few sticks of KVR 1GB DDR2 with Micron D9GKX. Too bad the price isn't sweet at all. B$199 per stick = RM458.
 |
|
|
Dec 16 2006, 05:50 PM
|
Senior Member
3,375 posts Joined: May 2005 From: MeeRee
|
QUOTE(Hyde`fK @ Dec 16 2006, 10:19 AM) Yesterday I went up to Brunei and went to a couple of computer shops there. And one of them sells a few sticks of KVR 1GB DDR2 with Micron D9GKX. Too bad the price isn't sweet at all. B$199 per stick = RM458. kvr wif micron  but imagine 458x2 = 916 with this price or top up a bit i can buy performance ram oledi...wic is D9GMH / D9GKX also  |
|
|
Dec 16 2006, 06:27 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(flatfinger @ Dec 15 2006, 10:06 AM) taken from xtremesystems...E6600 + Biostar 965 DLX can do 585 fsb...n as i know this mobo can support until 600max Can beat Asus board.. Biostar should be proud !! 2 thumbs up!! |
|
|
Dec 16 2006, 08:12 PM
|
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk
|
QUOTE(Hyde`fK @ Dec 16 2006, 10:19 AM) Yesterday I went up to Brunei and went to a couple of computer shops there. And one of them sells a few sticks of KVR 1GB DDR2 with Micron D9GKX. Too bad the price isn't sweet at all. B$199 per stick = RM458. wat is the stock speed of the KVR 1GB ? |
|
|
Dec 16 2006, 08:41 PM
|
Senior Member
4,094 posts Joined: Jan 2003 From: USJ
|
Impressive lists, just got my new E6300 on a crappy intel mobo DG965WH
 This post has been edited by alexwsk: Dec 16 2006, 08:41 PM |
|
|
Dec 16 2006, 09:16 PM
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
Currently I'm facing some problem here...
The idle temp for my e6300 is 51-54C, is that too high? I'm using stock hsf, and ald apply the AS5... Any1 help pls!  |
|
|
Dec 16 2006, 10:14 PM
|
Senior Member
3,567 posts Joined: Jan 2003 From: Paradise
|
QUOTE(RokXIII @ Dec 16 2006, 09:16 PM) Currently I'm facing some problem here... ya i got around that temp when using stock hsf. try to remount ur hsf and apply a thin layer of as5 properly.The idle temp for my e6300 is 51-54C, is that too high? I'm using stock hsf, and ald apply the AS5... Any1 help pls! |
|
|
|
|
|
Dec 16 2006, 10:14 PM
|
Senior Member
1,167 posts Joined: Mar 2005 From: sunway/petaling jaya
|
hmm i just assemble my pc yesterday and in stock condition temperature oso arround 50-53c but i think that is normal temperature for cpu on stock coolin rite anyway im using conroe 6600..
|
|
|
Dec 16 2006, 10:34 PM
|
|
Senior Member
2,378 posts Joined: Jan 2003 From: Miri,Sarawak,Malaysia Status: Dead!
|
QUOTE(siauann @ Dec 16 2006, 05:50 PM) kvr wif micron Yea, see the price also boh sim liao. but imagine 458x2 = 916 with this price or top up a bit i can buy performance ram oledi...wic is D9GMH / D9GKX also QUOTE(rlhc17 @ Dec 16 2006, 08:12 PM) wat is the stock speed of the KVR 1GB ? Rated at PC6400. |
|
|
Dec 16 2006, 10:52 PM
|
Senior Member
1,464 posts Joined: Dec 2004
|
QUOTE(alexwsk @ Dec 16 2006, 08:41 PM) Impressive lists, just got my new E6300 on a crappy intel mobo DG965WH good luck on oc if can......did u choose or it's from those "cheap packages"? |
|
|
Dec 16 2006, 11:08 PM
|
All Stars
10,688 posts Joined: Jan 2005
|
QUOTE(mmohdnor @ Dec 14 2006, 02:05 PM) guys, lastime my highest clock with e63 was 3.15Ghz for 24/7let's say i get myself a gigabyte 965P-DS3 and a E6300 ... what is the minimum overclock speed that is easily achievable ? seems like 3ghz is a 'normal overclock' for everybody, even if using the stock HSF ... i see that most of you guys are using 7 for the multiplier and the FSB is over 430mhz for most of u ... anybody here not having 'good luck' at overclocking E6300? thanks! average u can get around 2.8Ghz above |
|
|
Dec 17 2006, 12:20 AM
|
Senior Member
610 posts Joined: Jun 2006 From: Ampang, Selangor
|
QUOTE(RokXIII @ Dec 16 2006, 09:16 PM) Currently I'm facing some problem here... Just (finally) got my C2D system today. And using stock heatsink, it idles at 52c in an airconditioned room. Put under load (TAT), the temp is 68c! and everything is at stock. Even the bios (F6) The idle temp for my e6300 is 51-54C, is that too high? I'm using stock hsf, and ald apply the AS5... Any1 help pls!  |
|
|
Dec 17 2006, 12:54 AM
|
Senior Member
2,423 posts Joined: Jan 2003 From: Alor Star & Changlun
|
QUOTE(vassalle @ Dec 17 2006, 12:20 AM) Just (finally) got my C2D system today. And using stock heatsink, it idles at 52c in an airconditioned room. Put under load (TAT), the temp is 68c! and everything is at stock. Even the bios (F6) But how is the stablility...? |
|
|
Dec 17 2006, 01:21 AM
|
|
Senior Member
3,567 posts Joined: Jan 2003 From: Paradise
|
QUOTE(vassalle @ Dec 17 2006, 12:20 AM) Just (finally) got my C2D system today. And using stock heatsink, it idles at 52c in an airconditioned room. Put under load (TAT), the temp is 68c! and everything is at stock. Even the bios (F6) air con room got 52c idle temp!? hm.. that's abit too high. did u mount ur hsf properly? try to clean the stock paste on the base of hsf and apply a thin layer of AS5 maybe on the cpu. remember to clean the previous paste perfectly. use lsopropyl alcohol to clean. make sure ur air flow in the case are nice enough. |
|
Topic ClosedOptions
|
| Change to: |  0.0299sec
 0.44
 6 queries
 GZIP Disabled
Time is now: 9th December 2025 - 06:41 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.