i just need explanation on those +0.1v dimm,pcie,fsb,mch stuff... waz tht?
will it dmg my components etc etc....

thats what we called "fun" with oc-ing - to test out with the Betas. If everytime waiting fot the final release, no syok anymore la...

Bro, Good luck for ya... Mine still stucked at 499fsb with the F8j

its +0.1v to your default voltage. For vdimm, the default is 1.8v. Max up vpcie, vfsb and vmch wont kill you board if u got proper cooling, I max up everything, and its running rox stable after months of folding

Evogenix

easy for you to say, you are water cooled....

its nothing to do with the "water" or "ln2" cooled. You should able to watch up the temp from time to time when oc-ing even on air. I used xp120 before switch into water, setting still da same

Evogenix

This post has been edited by Evogenix: Dec 12 2006, 08:01 PM

waz mch?
max u mean put to maximum?
is 65C on orthos considered hot?

This post has been edited by deric88: Dec 12 2006, 09:08 PM

max = highest value available lor...
max for vmch is +0.3 which equal to around 1.6v. I use MM to check onboard, the reading around 1.55-1.58v lik that

Evogenix

is 65C 100%orthos considered hot

@Evogenix
I cant find new BIOS for PS3 at Xtremesystem.
Cant even find where to d/L BIOS for Gigabyte mobo.
Can u gimme some hint please??

consider ok lor... mine arond that temp as well...
remember this, you wont on Orthos 24/7, so normal usage will around 52-58 lik that nia

PS3? is it S3? not all board got Betas BIOS, I saw got DS3, DS4, and DQ6(if not mistaken) only
Normally d betas wont post up on the official GGB website

Evogenix

folding also something like orthos what? also 100%
how to play with ram timing?

oh ya.. just saw your lil folding tag beside
folding is loaded @ 100%, but the temp will 3-4C lesser than Orthos.

ram timing arr.. just play around with 4/5-4/5-4/5-x, find the most stable setting for your self will do. If not stable, lossen the timing more.

Evogenix

Dont need to run so tight if run 24/7, CL-5 is good enough


@Evogenix
u think porc week will affect o'c result a lot??

This post has been edited by yehlai: Dec 12 2006, 10:36 PM

personal opinion. Nope.
I saw a lot of oc-ed results from the same weeks/batches. But, the results seem kinda not consistant at all.
Some ppl just believe into those weeks theories. No comment on that. All based on your self.

Normally, e6300 can reach min of 3.0GHz with closing eyes. If wanna oc above of that, need to see how good is your proc can be oc-ed. Sometime, vCore must applied to increase the oc-ing as well.

Evogenix

Ya mine is over 3Ghz (can see my sign).. after reach tht clock speed add vCore or vFSB/vMCH also no use. So frustrated.. but nothing more i can do.
If E6400 i think have higher potential to hit 3.6Ghz.

yes, got a large percentage can reach 3.5GHz above with e6400
But, if wanna get e6400, rather go for e6600 with the extra caches.

Every cent that spent on that extra caches are worth it.

Evogenix

kenot go higher? not a good proc or ur mobo is limting u
mine can go up to 450x7..more than need very high vcore wic is not good for 24/7 usage i believe...tats y i play wif 400x7 + undervolt wif current setup

is there any harm raising 0.1 for ddr, pcie, fsb and 0.3 for mch?

This post has been edited by deric88: Dec 13 2006, 01:13 AM

YES!!!
you might get addicted to pushing ur system even faster and faster! very dangerous for your pocket one...
most of the guys used higher than that bro...so far, no harm but whatever it is always follows the rule of thumb of ocing...cooling, cooling and cooling

yeah...

any ideas to cool down a PC kampung style...?

bukak side panel casing...blow kipas meja directly..