Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 Intel® Core(tm)2 Duo/Quad Overclocked Rev. 2, Going beyond factory limits

views
     
s[H]sIkuA
post Mar 25 2007, 08:55 PM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
irangan and yehlai, nice result thumbup.gif Whats the load temp btw? Since the vcore is 1.6 must be pretty hot wink.gif
s[H]sIkuA
post Mar 26 2007, 12:01 AM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
QUOTE(kevyeoh @ Mar 25 2007, 09:58 PM)
updated mine with SuperPI result with CPU-Z capture...

superPI: 17seconds (1M)... is it ok?

when i try to increase my multiplier to 9 with 380Mhz FSB to get 3.4Ghz, i need to bump up my Vcore to 1.5V but then my temperature not stable using air cooling..already almost reaching 90'C at TAT...

need water cooling next liao...hehehe...
*
TAT dont read ES proc properly, what you see there 90C may be correct but it also mean it is wrong , just check your software reading temp and add 8-15 to the temp to get and estimate of your core temp smile.gif I think SpeedFan is an alternative for ES users like us smile.gif

Hydey : GG not yet try la, been sick for 3 days now rclxub.gif
s[H]sIkuA
post Apr 3 2007, 05:51 PM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
QUOTE(Joseph Hahn @ Apr 3 2007, 04:46 PM)
What happened to the first post ? blink.gif Anyway can't wait to join you guys after April 22. tongue.gif
*
Any reason why that day? tongue.gif Which chip u going to get? 6600 ?brows.gif
s[H]sIkuA
post Apr 3 2007, 11:04 PM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
QUOTE(DaRkSyThE @ Apr 3 2007, 10:05 PM)
the thing is apparently asus purposely put the vdroop there according to some sources. kinda weird dont u think?
*
safety reason? but I doubt ppl buying those board AND don't overclock so its kinda pointless sweat.gif vdroop is really annoying on asus board , most of the board suffer the same fate of 0.05-> 0.1
s[H]sIkuA
post Apr 3 2007, 11:31 PM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
QUOTE(coolice @ Apr 3 2007, 11:29 PM)
i did the pencil mod sometime back,manage to get 0.02v drop during idle and 0.03v when load,aiks..i need more vcore laugh.gif
how is s[H]sIkuA's result?
*
1.325 (bios) , got 1.312 tongue.gif I shade twice actually, the first time also not so good, hmm now the problem is if I change the vcore the droop will be back?(or so I heard) tongue.gif
s[H]sIkuA
post Apr 3 2007, 11:44 PM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
QUOTE(coolice @ Apr 3 2007, 11:32 PM)
izzit..i got no such prob eh nod.gif
*
Glad to hear that , I am not sure as I now still havent change the vcore yet
s[H]sIkuA
post Apr 4 2007, 12:21 AM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
QUOTE(Hyde`fK @ Apr 3 2007, 11:45 PM)
You try and let us know here lor. tongue.gif

Dang lar, my 650i board still dont have news yet. sad.gif
*
Sell it and get Bad Axe2, its time to get hardcore tongue.gif
s[H]sIkuA
post Apr 4 2007, 05:25 PM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
QUOTE(DaRkSyThE @ Apr 4 2007, 07:32 AM)
badaxe2 is good but then the DFi infinity p965 seems to be better in many aspects
*
Well that board is definitely going to be great , but until it is released, I won't be putting a high hope on it.

Bad Axe2 on the other hand is already proven its stability/overclockability and definitely be one of the top in my next motherboard list tongue.gif
s[H]sIkuA
post Apr 4 2007, 09:35 PM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
Well I have good impression on DFI due to their awesome AMD board lineup and if they do the same to this 965 then it might be a winner , afterall the initial test some review got it to 545 FSB blink.gif

And I have read somewhere this board , fsb to fsb (or clock to clock), it is faster than any other 965-based board wink.gif
s[H]sIkuA
post Apr 5 2007, 11:00 PM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
QUOTE(irenic @ Apr 5 2007, 03:23 PM)
yeah.. but dont u forget that xbx2 vdroop is almost second to none.. so if u set the vcore to 1.6, then u will definitely get maybe 1.595v, and there is also enchanced power slope setting to ensure the vcore is stable and consistent.
p5b premium is not a good board, and i dont see it as high end mobo wink.gif
A word from an owner of BX2 thumbup.gif

Asus Vista series board really just a ripoff IMHO, using Vista tag on a hardware is something I would never attracted to... what the heck Vista Certified/Ready stuff doh.gif Even mouse also need Vista certified
s[H]sIkuA
post Apr 6 2007, 12:40 PM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
OT : Thats also apply to the Fatality line of product doh.gif Fatality cooler , will the cooler help u frag more or what laugh.gif
s[H]sIkuA
post Apr 28 2007, 05:41 PM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
QUOTE(UnUsUaL @ Apr 28 2007, 05:33 PM)
First attempt OC my DS3+E6300, not dare to push too much as i using the stock HSF. Tried 500FSB 1:1 on this Kingston Hynix Chips with no prob, back to 450 for daily operation smile.gif

Click To Show Image

Temp reported in Core Temp 0.95 is higher than others apps reading, is it a bug?
*
Its normal , cause it shows the processor core actual temperature instead of the usual temperature

BTW, nice overclock, might get higher if use aftermarket cooler wink.gif

PS: no desk mod already? tongue.gif
s[H]sIkuA
post May 2 2007, 04:25 PM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
QUOTE(afosz @ May 2 2007, 11:20 AM)
I just want to ask something about OC C2D. I see C2D is rated FSB while AMD is HT Link. What's the difference? I know OC AMD must keep HTL under 1000MHz, but what about C2D? OC C2D must keep the FSB under how many MHz? And AMD has HTL multiplier, mostly X3, X4 but what about C2D? Is there any multiplier?
*
No maximum for C2D smile.gif Well AMD HT can have a multiplier so its not really a problem either smile.gif
s[H]sIkuA
post May 3 2007, 12:18 AM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
QUOTE(hyyam85 @ May 2 2007, 05:46 PM)
hi. i m running a e6600 ES at stock speed. i get idle temp of 39C. is that normal? i m using scythe ninja with stock fan and AS5 for cooling.
*
Yeap thats normal smile.gif
s[H]sIkuA
post May 25 2007, 03:59 PM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
QUOTE(Hell Fire @ May 25 2007, 12:44 AM)
Hmm any asus p5b-e plus user here? need advise on what should i set in bios settings, thanks biggrin.gif
*
I am using it wink.gif What you want to know nod.gif
s[H]sIkuA
post May 25 2007, 05:18 PM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
QUOTE(linkinstreet @ May 25 2007, 04:12 PM)
anyone reccomend me a cheap but powerfull PSU? my Icute is now underpowered and I cannot get the overclock to stable. It will shut down my USB ports to get the power to the processor
*
Whats your budget? If its around 250-350, try to get Enermax FMA/Liberty or Silverstone Strider/Element
s[H]sIkuA
post May 25 2007, 06:14 PM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
QUOTE(linkinstreet @ May 25 2007, 05:19 PM)
gah, I only have 150~200
*
Then you have to settle with CM Extreme tongue.gif Seriously invest an extra 100-200 on the PSU, its one of the most important part, more so especially when you want to overclock

This post has been edited by s[H]sIkuA: May 25 2007, 06:14 PM
s[H]sIkuA
post May 25 2007, 10:00 PM

live in the present
*******
Senior Member
2,162 posts

Joined: Sep 2004
QUOTE(Hell Fire @ May 25 2007, 09:49 PM)
Hey, mind sharing what should i tune in my bios? thanks smile.gif
*
If overclocking setting, look here

http://www.overclock3d.net/reviews.php?typ...otherboard_p965
http://www.tweaktown.com/reviews/1028/5/pa...king/index.html

Disable C1E if you don't want the cpu to underclocks itself when idling
Disable Spread Spectrum
Set PCI clock to 33.33

Most of the setting is actually applicable for all the motherboard smile.gif
« Next Oldest · Overclockers United · Next Newest »
 

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.6655sec    0.67    7 queries    GZIP Disabled
Time is now: 9th December 2025 - 09:55 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.