Not sure if this i the right place for me to post. if anything please guide me.

Hey guys, recently i just changed my stock cooler to ID Frostflow 240L.

my temperature is around during idle is around high 30c during load is around mid 40c

just wondering if this is normal

PROC: i5 760 (i know it's ancient) didnt OC or anything
MOBO: Biostar H55 HD
Case: Corsair Air240

Sitting on a desk with no AC and no fan

Using RealTempt GT to check the temperature


* i dont know why, but my fans are running at full speed all the time.

any feedback is very much appreciated. thank you in advance.

Sounds ok

yup, normal . you should see mind .

How hot is ur rig running?

a bit off topic , mine is cm seidon 120v on i5 3570k no oc.... room temp is around 30 no aircon only kipas, CPU idle 40, load 60...

so urs quite ok i think, unless ur expect is to have lower temp

hmmm. i guess my temperature is OK. its just that just thinking of how im gonna control the fans because its running at full speed all the time. even when i changed my settings, it just keeps on spinning at 100%

Is there any fan control you can access in your bios ? You should be to control fans that are connected to your mobo. Anyway your temps are pretty normal. Mines at 43 idle load is 60+

Tried changing the parameters in bios. But its not doing anything. All of my fans are connected to the mobo

That's weird, latest bios version already? Try resetting and setting again, I.e. remove CMOS battery and put back in. Then go in and try changing it again

fan is voltage control or pwm type?
recommend to run pump from psu and fan from cpu fan connector

currently fan from CPU header and pump is from case fan header.

pump from PSU.? so should i get molex to fan header cable.?

EDIT*: fans are pwm.

This post has been edited by munk3y: Jul 12 2016, 12:39 PM

30c idle, 60c load is sound okay, most intel processor max temp is 100c so 60c is normal

Tempp seems normal to me, but I dont know whether the Biostar bios allows changing fan speed or not lol

your idle temp is ok, load temp is full load at 100%?

Ive upgraded my whole set-up, or at least most of them.

changed my mobo to MSI Z170M mortar
CPU to 6600K
GPU to G1 1070

i will update the temperature soon.

This post has been edited by munk3y: Sep 14 2016, 08:01 AM

Its a normal temperature. Add Extra Fans To Make It More Cooler

Please be realistic with temp expectation.
Even water cooled cpu at best goes slightly higher 3-5C than ambient room temp.
Don't expect it go below 25C unless we live in US / Canada.

For PWM fan control, 90% of mobo in the market is located at CPU_FAN_PWR pin.
The rest are voltage control or none at all.

this is very normal, mine hit 50c++ playing game time. idle is 32c. most intel can tahan 100c but of cause that is gg level lol.

sorry wrong post

This post has been edited by dragorc: Jan 12 2017, 10:32 AM

It's not the right place you have posted.