same as me started last week... before is around 5-15ms to SG server... nowdays the best is 49ms with alot of timeout

ok i will change it now

i think all house at the condo must have one telephone port connected to mdf

the best settings for apartment ( due to many wifi surroundings)
A) RTS Threshold
B)DTIM Interval
C)Beacon Interval
D) WIFI CHANNEL
E) WIFI BANDWIDTH (20MHZ/40MHZ)

The best thing to do for those stay in the apartment/condo is to use the 50ghz band wifi.

for those who cant due to outdated equipment ( like me ), what i do is scan around the area and look for what channel the other wifi access point are. priority will be channel 1,6, 11 as these channel will have less overlapping issues.

i scanned and found out that my neighbours mostly use 6 and 11 channel. therefore i decided to use channel 1 and voila, signal strength jumped out to 99-100% from 80-85% while using AUTO.

This post has been edited by Shah_15: Aug 2 2016, 10:19 PM

50 GHz? Why am I not aware of it? I guess you're referring to 5GHz. 60GHz wifi already started experimenting but not yet commercialize.

human always make mistake

i changed to Singtel dns

What is Singapore SingTel primary DNS server

Primary DNS: 165.21.83.88
Secondary DNS: 165.21.100.88

Source: http://kim.sg/index.php/general/20-what-is...pore-isp-teleco

IS this dns is good compare to open dns and google dns?

The condo i am living in only have streamyx and everybody is using 2.4Ghz and all the channel is full from 1-11. -.-
fml

There is one inside.. but it has been for years.. maybe 8 years?
When the TM contractor came, he used a device and point at the port socket, it does not rang.. I opened the socket and check, got a very old cable inside.. I think it was broken

The fiber optic cable has 8 years old? Please do make sure that the fiber optic cable isnt folded or anything maximum bend is a half circle shape only. If it isnt bent, then it's time to check the connector maybe they didnt dispatch your connector well.

This post has been edited by mztang52: Aug 3 2016, 08:49 AM

telephone line la..what fiber optic cable..

oh... Then it is weird.

I am not sure what cable is that, previously I stayed at PJ condo, was using Time Fibre back then..
They pulled the fiber optic cable from MDF room and enter thru my door.

This condo was different? There is a port socket in my unit, TM contractor came to my unit without bringing any fiber optic cable.. Not sure what port is that, used for telephone or Unifi

UniFi runs on two types of infrastructure. First one is on fiber optic cable, the second type is on VDSL technology which is the phone port.

This post has been edited by mztang52: Aug 3 2016, 10:32 AM

so I need to replace my phone port's cable then.. still waiting for my management to reply me..
Even them is not sure who is gonna do the job.
TM contractor opened the MDF room, he see all the cable inside is new one..
Aih, frustating

What is that thing that the TM contractor checked for you? Dont mind can you post the image here?

This post has been edited by mztang52: Aug 3 2016, 10:37 AM

This one, he used a device insert into the socket, his device not ringing, he tested for me, if there a cable is connected to another end, the his device will ring.

Then he told me I need to inform management to install the cable from mdf room to this port socket

Do you have other phone port?