Oh, too bad about the invoice

i checked the company registration number 414062-W and it belongs to DB SPEC ELECTRONIC SDN BHD

if max corp sb is gst registered, i'd make more damage by reporting them to customs dept for not issuing a tax invoice. the fine is around 5k iinm.

well their mudah link/id is mudah.my/max-low-db-spec-electronic-sdn-bhd-puchong so, should be right

you can make real impact / damage by lodging report to customs dept that they failed to issue TS a tax invoice for the rm40

if it were me, just call up some friends, kasi langgar itu kedai. settle. show him bumi ni milik sapa.

kidding

normally lansi people like this will get scared when u more lansi to them. summore skinny boy only. hantam ja la.

or legally, report to KPDNKK to get refund

Dang. Quite far, if you were looking for replacement wheel cover, why you didn't try your average spare part shop?

Wanna buy Thermo wrap from him. Now I wonder if I bought it I get 10M or 5M

[quote=bo093,May 31 2016, 08:58 PM]
Dang. Quite far, if you were looking for replacement wheel cover, why you didn't try your average spare part shop?

Hi, because I went to quite some shops like Brothers and other car accessories and they don't have the stock for proton saga blm size( 13inch now I am sure of the size). One day I check their Mudah ad and I was like 'why not give it a try, what is the worst that could happen'. Which here I am now.

hi ! my name is max. i am from max corporation sdn bhd.

first of all, tis guy come into my shop and wanna buy the wheel cover. i ask him wat size is it. he didnt know. so i went and measure with him. i measure it was 14". wheel cover has 12" / 13" / 14" / 15". so of cause i got the measurement is 14" so i give him 14". he check everything and leave. then he message me the size was different. its ok. bring it back to the shop and i will change for u. when he arrive at my shop. he just said he wan a refund coz i was wasting his time and his petrol. i said, i only can change for u if it is the wrong size. but he insisted he wants a refund. in my shop there are two signs stating that goods sold and not exchangeable nor refundable. i showed him that sign. i said i can change to u not a problem but no refund. he said i was not trustworthy and because i am wasting his time and petrol. human make mistakes / errors. if i measure wrong then i will change. not a big deal. i also dont wanna make u run up and down for nothing. he also did check the goods before taking the goods out of the shop. then he insisted of wanting a refund and i said no. and he was complaining a lot so i asked him to leave. there are other customers around i need to serve and other things i need to do. i asked him to leave but he didnt want to. he and i were quarreling so my dad came and pull him out of the shop. that is my office not his office. that is not a place for him to argue. i already told him that i will change one new set to him not a problem. i have plenty of stock. when my father pull him out of the shop. my customers and installers saw. no one was hurt at all. i just went out and ask him to leave. he made a police report. the police came and the police also ask him to change the goods.

and for the design. the factory mix the design i would not know because everything is kept in the box. he open the box and check himself and left. and afterwards he came back. but for 13" i have the exact design he wanted but he also didnt want and only insists on a refund.

he posted me on fb. i dont mind. but not letting me comment. why ? is there anything tat u are afraid of me telling everyone the truth ? i have the cctv to prove everything that i am saying.

and for all those saying about the invoice problem. i have a few companies.

i use sunrise max enterprise for retail. i am a supplier my turnoever is more than what u think so i will of cause have a gst company. i also can issue u all a gst receipt not a problem. but there will of cause be 6% chargers.

and for the installation part. i am a supplier i dont do any installations. i only sell. i dont commit myself to installation. my installers that day was all full. all were busy. many of my customers also just buy and go. anything wrong just comeback unless i told them no warranty then they would have to test on the spot. rm10 is for the installer which is my customer. if u fell rm10 is exp then dont give them install. i didnt force. i only sell. because i dont have any knowledge about tyre. how would i know how to see. he himself also cannot guarantee me the size so i have to measure. if wrong then change. otherwise what u all wan me to do ?

and for those saying wanna buy price a but got price b. i have many types of products.

for example for camera. i have normal camera / hd camera / night vision camera / night vision hd camera / night vision infrared camera / dummy night vision camera. all also the same design. my shop basis is first come first serve. of cause who come i will sell to who first. i cannot wait till u come. u only call. sometimes shop will take 10sets / 20 sets one go or more. so will i sell it ? of cause i will sell.

another example hid. i have more than 10 types of hid. 5 types looks the same. only inside different. how would u know how to differentiate ? only i know. coz i made all my markings.

if stock finish and u wanna buy. of cause u can. u just need to pay deposit. rm50 min. and when the stock reach i will contact u and sell to u. if u don wanna wait or pay deposit i cannot do anything. i have more than 2000 types of products in my shop. how can i remember or forecast wat goods finish and which goods not.

This post has been edited by maxcorp: May 31 2016, 10:18 PM

Maxcorp, are you dumb or what? You don't measure the wheel with a measurement tape!! From the tyre profile there are number indicating the rim size already.

Damn seems like this maxcorp confirm is a kaki conman!

anything u all can just direct call / whatsapp me +6010-3668539. i can show u and prove to u everything i tell is the truth. if u wan u can come to my shop now. i will open my shop, show u my goods, show u the cctv.

hey, i just said. i dont have much knowledge about tyres. shops just tell me wat size they wan. i ad ask him but he didnt know. so i measure. if its wrong. change. not a big deal. wat is such a big deal for changing ?

This gonna be good

seller even come and register in LYN forum lol

You still don't know what's your fault? As a seller, you should have at least some knowledge on what you're selling. If you made a mistake because you don't know what you're selling, at least offer a courtesy refund to TS.

Keep on doing that & I guarantee your business won't last long.

ya. because i just wanna make a clarification. he only says about his story. but no one see my side of the story. if u are in my situation. how would u do ? i just wanna know. no offence or anything.

i ad say. i am a supplier. i only sell. i dont do. if he dont wan. he can dont buy. i didnt force anyone to buy anythings from me.

this is getting interesting. leave a footprint here so that i can continue tomorrow! =D

frankly i dont think he is a conman, a conman would not have been able to stay in business so long... he has quite the shop too, many products

maxcorp i do think you could have easily checked your inventory for the wrap and lights before i dropped by. at least this way one would not have to go all the way there just to find that the exact pattern one wants is no longer available. thats Im no business student/businessman but good customer service is one of the best customer retention strategies there is... (imo anyway )

anyway putting that aside, if anything you should really be defending yourself from the claims that you basically threw ts out of your shop.... the rest is business that's all fine and dandy but the throwing out of a customer on the other hand..... that takes it to a whole different level



====================================================
vanpersie91vindroidbla2sheep
ehh, ni bukan /k dun pray pray ya

This post has been edited by lsm1991: May 31 2016, 10:50 PM

post video here, only then we can judge both side