Hi,

I ported from umobile to Hotlink and the line was activated this morning (currently using Hotlink SIM card).

After porting in, i do not receive any of my banking TAC codes (i tried CIMB, Maybank, HSBC, Public Bank). It was fine right until i changed the SIM card to Hot link.

Sending and receiving SMS is OK
Making and receiving calls is OK
Data is OK

Please help me fix it. Thanks.

This post has been edited by chinsm: May 19 2016, 03:34 PM

This is so silly and its the first time i hear of this.

Porting into umobile was so convenient (no issue at all) - i don't have to visit every bank, LHDN, EPF to reset back my mobile number.

I'm going to port back to umobile to save all these hassle and time.

Hotlink, if there is a faster way, let me know. Otherwise, goodbye.

Ok, i will go to Maxis Center to change SIM card. What do i inform them?

Ok, i will go to Maxis Center to change SIM card. What do i inform them?

Your suggestion works.

I have tried the following:
1. Verify SMSC number
2. Replaced SIM card
3. Changed TAC phone number to new number (#2) and then changed it back to original number (#1). New number (#2) works but original number (#1) still could not receive TAC

Finally worked when i called the bank to change TAC gateway.