how to check wheter im on VDSL2 or ADSL?

The signal to ratio (SNR) have increased when i checked the stats in my router after TM have completed the cable upgrading works at my place. My SNR now is 31db.

I think the cable upgrading works has something to do with the upcoming VDSL vectoring.

For me, snr and attenuation is still the same after they perform cable upgrading.

when i set the modulation to auto-sync my modem connect through VDSL2 but didnt assign ip adress..im using streamyx 8mbps

mine

[attachmentid=8425633]

when i set the modulation to auto-sync my modem connect through VDSL2 but didnt assign ip adress..im using streamyx 8mbps

any update on this vdsl thing?

already 2017, stimix still expensive like hell, yet the speed is horrible. ask tm about 8mbps, they answer not support, ask them about unifi coverage, they said no idea.

fuuuu, if not because of stimix's unlimited quota, i already dump it a long long time ago.

Nothing new.

The problem is....if TM use VDSL....who is going to sponsor the modem/router?

Ur location?latency?plan?

my snr VDSL2

But your attainable rate an reach more than 50Mbps.

when i set the modulation to auto-sync my modem connect through VDSL2 but didnt assign ip adress..im using streamyx 8mbps

more than 50mbps
but tm not allow me to upgrade 50mbps

I have just chatted with my friend from TM and he revealed that TM is now testing a new technology called VDSL2 Vectoring. With this new technology, existing copper cables throughout nationwide will be capable to reach 100 Mbps. This new technology has already taken place in Europe and US.

VDSL2 Vectoring is noise-canceling technology. It cuts out all of the noise, or interference, among the VDSL2 lines in a bundle. With no interference, every VDSL2 line can operate at peak speeds, as if it were the only line in the bundle.

So we are looking at new Streamyx plans with 30, 50 or even 100Mbps!

what modem do you use for your streamyx 8 ?

more than 50mbps
but tm not allow me to upgrade 50mbps