Hi, after hours of trying to connect my Maxis Fibre internet to a TP-link Archer C2600... I finally found a solution! So I thought I would share the same with this forum in hopes it could help other people who are experiencing the same problem.

I'm posting this because most of the articles I read either assume that your router has a Maxis configuration without getting into the details of what that configuration is. In my case, the router did not have a Maxis Fibre configuration script, so I had to manually enter the IPTV settings. (on a side note: these settings might work for other routers as well)

Please make sure you have your Maxis Fibre internet username and password before trying to connect the router (you can obtain this by calling Maxis)

Installation steps specific to TP-Link Archer C2600
1. Login to your router's admin panel

2. Click on Advanced > Network > IPTV
Click on the 'Enable IPTV' checkbox
Input these custom settings:
Internet VLAN ID: 11 | Priority: 1
IP-Phone VLAN ID: 400 | Priority: 2
IPTV VLAN ID: 17 | Priority: 3
Click Save

3. Click on Advanced > Network > Internet
Internet Connection Type: PPPoE
Username: [maxis fibre username]
Password: [maxi fibre password]
Click Save

Wait about 1-2 mins for the router to connect and you should be all set!

This post has been edited by maruks: May 1 2016, 08:31 PM

Hi I'm planning to change to my custom router also , TP Link WDR 3600.

However, after I set up everything, the phone have no connection, no idea how to connect VOIP. Contact maxis, they told me only can use maxis router to use VOIP

so with the above steps, are you able to use the phone?

maruks
thanks bro
at last manage to get the setting
really good router

hi, aren't maxis vlan internet id is 621?

image upload no limit

I think that's for tm fiber( unfi area)while the vlan that the ts provide is for maxis fiber(maxis area)

This post has been edited by yongtjunkit: Feb 4 2017, 10:04 PM

@SEP910 - are you able to use the phone on LAN4 and are you also able to access the internet on LAN1, since it is for IPTV?

Please advise.

Many TIA

Lan 1 cannot access internet
Lan 4 no idea, dont have phone to test

@SEP10 - LAN 1 Astro IPTV is working fine? Did you check on the astro decoder under setting... check on if multicast is ON? check on the internet connection too.

Another test: Power OFF yr router, and restart. See if the IPTV still workable?

Understand that astro iptv needs internet and also multicast to operate.

what is the default password when you already reset the modem? please help as i couldnt connect to my internet with the new router....

the password is your installation password. U can only get it from maxis and cannot change the password. This password is not your wifi password.