WARRANTY: 1 YEAR FROM ALPINE MALAYSIA
» Click to show Spoiler - click again to hide... «
GENERAL
Amplifier Type: Class-A/B
Channel Design: 4/3/2 Channel
Thermal Control: Thermal Management Control
Power Supply: DC-DC PWM Power Supply
Power Supply Design: MOSFET Power
Current Protection: Over-Current, Over-Voltage and Thermal Protection
Crossover: Variable Low-Pass / High-Pass
Green/red status LED
2 pair RCA pre-inputs
Power Requirements: 14.4 V DC (11 V to 16 V)
Input Sensitivity: 0.2 - 8.0 V
Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
Speaker Impedance: 4 or 2 Ω
Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB
Weight: 2.7 Kg
INSTALL
Terminal Layout: Two-Sided
Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
MAX POWER OUTPUT RATINGS
Total Max Power: 600W
RMS POWER RATINGS
Per Channel into 4ohms (≤1%THD+N): 4 x 50W
Per Channel into 2ohms (≤1%THD+N): 4 x 70W
Bridged into 4ohms (≤1%THD+N): 2 x 130W
SOUND TUNING
Crossover Frequency (Variable, OFF/LPF/HPF Selectable)
1/2 Ch: LP/HP: 50Hz – 500Hz
3/4 Ch: LP/HP: 50Hz – 500Hz
EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain 0dB to +12dB (3/4 Ch only)
DIMENSIONS
Footprint: 330 mm x 52 mm x 240 mm
Amplifier Type: Class-A/B
Channel Design: 4/3/2 Channel
Thermal Control: Thermal Management Control
Power Supply: DC-DC PWM Power Supply
Power Supply Design: MOSFET Power
Current Protection: Over-Current, Over-Voltage and Thermal Protection
Crossover: Variable Low-Pass / High-Pass
Green/red status LED
2 pair RCA pre-inputs
Power Requirements: 14.4 V DC (11 V to 16 V)
Input Sensitivity: 0.2 - 8.0 V
Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
Speaker Impedance: 4 or 2 Ω
Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB
Weight: 2.7 Kg
INSTALL
Terminal Layout: Two-Sided
Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
MAX POWER OUTPUT RATINGS
Total Max Power: 600W
RMS POWER RATINGS
Per Channel into 4ohms (≤1%THD+N): 4 x 50W
Per Channel into 2ohms (≤1%THD+N): 4 x 70W
Bridged into 4ohms (≤1%THD+N): 2 x 130W
SOUND TUNING
Crossover Frequency (Variable, OFF/LPF/HPF Selectable)
1/2 Ch: LP/HP: 50Hz – 500Hz
3/4 Ch: LP/HP: 50Hz – 500Hz
EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain 0dB to +12dB (3/4 Ch only)
DIMENSIONS
Footprint: 330 mm x 52 mm x 240 mm
This post has been edited by Cars Audio: May 1 2016, 01:54 PM