Hi, i am looking forward to use either type of cooling method to cool my cpu.

Currently using the intel stock fan...

I am thinking CM Nepton 240m but on google results, forums, most of them have faulty pump or rattling noise

for air, there's this V8 GTS, but it's kinda huge to me, but i guess it's lot safer than pump failure and all, right?

Can anyone give me some advice on this... which is more safer and less prone to failure, etc.

Other brand like Corsair also can.

Thanks!

Guess Air-Cooling is still safer, right?

I read on many forums, that AIO Cooler can have leakage and the fluid is corrosive and can damage my hardware....

I using i5 4440. no overclock... stock speed is sufficient, Idle temp is about 40c and in aircond at night, it can goes to 30c.

Just occasional medium gaming like Grid 2 and Pokemon TCG Online, the temp can goes to 45c. I'd like it to be lower on both idle and load.

about 45c or so, on light-spec gaming .... if 100% load as tested using Intel Processor Diagnostic tool, it goes 59c.

Which Air Cooler you recommend?
I am thinking on using Jetflo on it for the bling part. Blue i think

I am thinking on CM Hyper 412s for the twin brackets so i can install 2 Jetflo for push and pull, and exit through the rear fan , also jetflo.



This post has been edited by StuartLee2015: Apr 13 2016, 07:59 PM

here's the temp.


Attached thumbnail(s)

I using Corsair H100i v2.... idle temp is 35c when air cond haven't turn on, when on, it's about 30c

The leak is probably from pump over-work, probably from very thick dust build up on the radiator and the pump will constantly work to move the heated liquid to be cooled, when it's not cooled enough and send back to the pump, this will stress the pump and cause it to leak.

A once a month dust maintenance will do a great job of ensuring AIO coolers life.

I would just remove the fans ( push ) and then use brush to brush them.