Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

TIME [OFFICIAL] TIME Fibre Broadband™ v3.o, 500 Mbps of rocket science

views
     
se7en
post Sep 28 2018, 12:11 PM

resistance is futile
Group Icon
Admin
1,806 posts

Joined: Jan 2003
From: Captain's Cabin, Black Pearl

seems to be coming back up now.

was down in the following areas as well

Midvalley
KL Sentral
Brickfields
Bangsar

se7en
post Oct 7 2018, 04:52 PM

resistance is futile
Group Icon
Admin
1,806 posts

Joined: Jan 2003
From: Captain's Cabin, Black Pearl

QUOTE(Ineedalaptopnow @ Oct 7 2018, 04:45 PM)
Time upgraded speed to 500Mbps. I performed speed test on speedtest.net with my samsung smart TV UA55MU6100K. It showed 70Mbps DL and UL. It's in a  small 450sq ft studio room. Is there a way to speed it up?

I also tested speed on my old Samsung note 3. It seems the old device can't keep up with the speed either, which only shows 220-250Mbps UL and DL. Is this normal?

Thanks
*
2.4Ghz WiFi is going to give you around 50Mbps (for b and g) and closer to 100Mbps (on 802.11n) theoretical speed with very ideal conditions. Throw in distance, interference and congested channels and you are looking at 50-70Mbps at most.

5Ghz (on the 802.11n) might give you better but still within 100 to 200Mbps depending on distance, as well as your hardware (bonding channels on some routers will allow you to hit up to 600Mbps in theory). Keep in mind the 5Ghz band while providing higher throughput, drops off significantly as you get further away from the AP compared to the 2.4Ghz band.

If you really want to have >500Mbps stable WiFi, you need to get on the 5Ghz AC band, which allows up to 1.3Gbps on a single channel, and capable of going all the way up to 7Gbps on certain router models. TIME supplied c1200 is not going to give you anything more then 200Mbps even on the AC band (unless maybe if you stand right next to the AP). The issue is a lot of routers are auto configured to switch bettern 2.4Ghz and 5Ghz, and most of the time, you are only connecting on the 2.4Ghz band instead of 5Ghz AC when you walk away from the AP.

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0255sec    0.31    7 queries    GZIP Disabled
Time is now: 2nd December 2025 - 09:02 AM