My turn haha .. I saw a lot of expensive hi-end chassis u got there ... see how compared to my RM120 uATX casing

It a series of photos chronologically. Latest specs are as written in my signature (may change without notice)

-------------------------------------------------------------------------------------------------------------------------

Huge rig Photo just for the record, now disassembled


My desk in Kuching office. still using Gigabyte 3D Aurora 570 black, Gigabyte GA-X48-DQ6 ATX motherboard.


A look inside. Huge cooler IFX14 still there

-------------------------------------------------------------------------------------------------------------------------

HTPC rig using now

As I move to KL, I decided to make a small PC, but still the same spec but without ATX motherboard (GA-X48-DQ6). I squeezed all of them into CoolerMaster Elite 341 uATX casing including the IFX14 + HR10 cooler. Smaller casing for my small apartment and easy to move if I need to do work in Kuching (travelling). Gigabyte 3D Aurora 570 now rest at home in Kuching. Too costly to bring the heavy case.


My desk in KL


I change to GA-Q35M-S2 uATX motherboard. Squeezed everything (4 harddisks + IFX14). however harddisks too close makes it hot. Intake fan not strong enough.


I add Musketeer 1 (RM39 only at Lowyat), and can control rear FAN with it. Bluetooth 2.0 and WiFi USB are hidden inside the front cover. 3.5 nich card reader accessible here.


3/4 view of front. IFX14 has been taken out and SOLD to a forumer. Will gonna install smaller cooler soon. Regret a bit selling IFX14, it's cool n huge.


Side view with casing opened. Harddisk 1 located under the GPU, harddisk 2 hanging with custom bracket while Harddisk 3 & 4 inside the 3.5 inch slot. A lot cooler there around 40~41 celcius only during load. At the back is an IR receiver for TV remote

That's all for now. So busy downloading movies now hehe.

This post has been edited by jeopardise: Jan 31 2010, 11:58 AM

Just updated with the new Treetop L-2000 casing

Previous computer setup

Here's some photos



before ... use towel as 'casing' after selling the old CM Elite 341

Moving into new chassis Treetop L-2000















Specs:
Intel Q6600 G0 | GA-Q35M-S2 | 4GB Tracer PC2-8500 | NVIDIA GTX285 | 2 TB HDD | Samsung B2430H LCD | TEAC DVD+RW | AverTV Super007 analogue
Klipsch GMX A2.1 | MS Wireless Desktop 3000 | OdinGT 800W | Wifi+Bluetooth built-in | TreeTop L-2000 chassis

P/S: Photo quality quite bad, I only use Sony Ericsson W700i 2Megapixels as my main SLR


Current setup validation:
Q6600 3GHz + MSI P43-C51 + GTX285
http://valid.canardpc.com/show_oc.php?id=1342295

Previous setup validation:
Q6600 3GHz + Dell Nforce790i Ultra SLI + 4GB D3 + GTX285
http://valid.canardpc.com/show_oc.php?id=1539107

Q6600 2.4GHz + GA-Q35M-S2 + HD5850
http://valid.canardpc.com/show_oc.php?id=959935

Q6600 3.6GHz + GA-X48-DQ6 + HD4870X2
http://valid.canardpc.com/show_oc.php?id=522742

This post has been edited by jeopardise: Dec 22 2010, 04:06 PM

My L-2000 refresh for 2011 opening

Specs as my signature:



I just made a little mod to fit my unused Coolermaster Musketeer to fit into the compact L-2000 chassis and at the same time re-routed the monitor's power and HDMI cable into the casing to make it more clean.

I did it only with electric drill, sandpaper to smooth sharp edges, soldering iron, glue gun and iron saw.

The more photos, the merrier ...






And please enjoy my video:



or Youtube : http://www.youtube.com/watch?v=61sTrUw91pQ

I am still waiting my rotary cutting tools arrive from niclasteoh, and ... perhaps adding some cool stuffs later. Still researching ...

Sekian terima kasih.