Outline ·
[ Standard ] ·
Linear+
Plaster Ceiling Quotation, Reasonable?
|
TSforks
|
 Mar 21 2016, 11:58 AM, updated 10y ago
|
New Member
|
Hi Sifus,
Is the following quotation reasonable (for 1,600 sq ft)?
RM6,400 (@RM4.00 per sq ft)
To supply and install 12mm thk fibrous plaster board, jointing and finishing to give a flush seamless surface ready for decoration on concealed G.I support system to the approval of employer.
RM4,800 (@RM3.00 per sq ft) - painting of plaster ceiling
To supply and apply 1 coat of sealer and 2 coats of selected "Jotun" or equivalent glossy paint in selected colors (based on ID Designer / Client selection) and all works shall include surface preparation to receive paint.
is the painting overkill since 2 coats of glossy pain after the sealer?
This post has been edited by forks: Mar 21 2016, 12:02 PM
|
|
|
|
|
|
TSforks
|
Mar 21 2016, 01:26 PM
|
New Member
|
QUOTE(limo82 @ Mar 21 2016, 12:04 PM) TS, 1st item sounds reasonable. as for 2nd items, do you need glossy on plaster board? not really, but is the price reasonable if i were to choose glossy paint? somemore i thought usually rate is around 3.50 including painting white |
|
|
|
|
|
TSforks
|
Mar 21 2016, 04:21 PM
|
New Member
|
usually if flush design and painting how much?
|
|
|
|
|
|
TSforks
|
Mar 23 2016, 09:02 AM
|
New Member
|
QUOTE(ivolusion @ Mar 23 2016, 12:58 AM) RM4 per sqft is quite expensive. I just did mine for RM2.80 per sqft. Puchong area. 900 sqft for RM2,500 yours including painting? |
|
|
|
|
|
TSforks
|
Apr 14 2016, 10:04 AM
|
New Member
|
QUOTE(qitarii @ Apr 14 2016, 05:05 AM) Hi TS By right, any paint work starts with 1 undercoat and 2 coats of paints. At least that's how I do it. Maybe other painters have other skills as well  But the thought of have glossy paint for ceiling? I've never done it before as i think it's a bit risky if the ceiling works are not properly done or need touch-up. I don't mind the joining, but I think you better make sure all the holes/wiring needed for lightings/fan are done (but not yet installed) before the painting starts, cause once the ceiling needs paint touch up, the result might disappoint you. But i'm sure you hired a good ID/contractor so share us the photos once it's done ya what is a reasonable price for normal matt paint (1 undercoat and 2 coats of paint)? |
|
|
|
|
|
TSforks
|
May 8 2016, 03:03 PM
|
New Member
|
anyone know the price different between 10 mm and 12 mm fibrous board?
|
|
|
|
|
Quote
0.0181sec
0.47
7 queries
GZIP Disabled