Anyhow, digging back my older products to reuse and finish up. Haha.
Can't just keep buying and buying although I am surveying my next rinseless wash once my ONR finishes. Not sure if wanna get back ONR or try Osren's Rinseless Wash bottle which they are selling for around RM3x now on Shopee...
wah. just realised osren have rinseless pro for the shopee line too. I bought the rm80/1L one. Its 1:400 ratio though.
I see. Nice. Haven't been to check out Motor Mad's warehouse sales although I did visit the Meguiar's booth many years ago during some roadshow at the Mont Kiara car show and bought a few spray waxes etc. I always seem to baulk at buying in bulk cos I thought I won't have the time to finish up such a huge container. But you raised a very pertinent point. Since it's gonna be used very often [at least weekly], makes more sense cost wise to buy in bulk and slowly finish it.
At the moment, I am still contemplating going back to get Osren's 4L wash or just stick to the cheaper ones like Tupps 1L bottles which are sold at supermarkets/ACE Hardware...
dont find any difference with the osren shampoo and the much cheaper perma glass shampoo aside from slightly thicker foam
Hmm I see. What I do notice is the Osren's wash suds better la compared to let's say Kit Car wash solution.
You did raise a good point though bro. Cost wise, the 4L wash solution of nano wash that I shared with bro V429 previously was quite worth it considering how long it lasts.
4L of the perma glass only rm25 though. 😂. yeah the suds is better
Like my ride, the moment got water contact, whether drizzle, downpour or via garden hose, it will likely bead off down the bonnet, and sheets off if I use hose.
But after some time, especially after rain 'stops' - the rolling stops too and the beads will remain on the car.
That's why if time permits, I would either do 1 of the following:
1. Drive the car around to remove majority of the beads especially on the roof areas
2. Quickly wash and dry off the car with drying towel
Can't let those beads dry off otherwise causes water etching on my ride.
[attachmentid=10790392][attachmentid=10790393] They usually sell for around 15-25 IINM? the one from super cowboy (Melaka) is either fake or really ancient old stock parallel import. It works similarly, if not same as the other bottle
Will consider this, as im topping up the rain x on my front windscreen every 2-3 weeks. Seems like not as lasting as claimed.
Hmm maybe some other factors, cuz my rain X still going very strong sheeting water at stand still and 30-40 kph water start to fly away.
And that's from my mid December detailing session until now and I've yet to spray any washer fluid yet cuz Sayang the original rain X coat 😂 That's almost 2 months already though to be fair, car usually park at car porch shaded. It has however seen at least 5+ rain action since, which one was right after the detailing session completion/show case which I've shared YouTube lol
btw is this works individually from the Rain X coat or work synchronisely? apply the rain x coating d, then add the washer fluid to the wiper tank right? the washer fluid seems more expensive than the coating
I would go together cuz like you said, the original rain X coating is dirt cheap. 1 bottle can last like 5 to 10 years
And it's unknown how the rain X additives react with other coatings.
What I do know is that is reacts well with *most* washer fluid additives that focuses on cleansing such as Sonax xtreme nano pro washer fluid additives 1:100 (mouthful name lol) What I do is I half dosages for both and mix them together, and even further dilute with more water so I get even more value out of both products.
You meant you mix the rain x coating and washer fluid into the wiper tank?
No, I mix rain X washer fluid additive + Sonax washer fluid additive + water into wiper (washer fluid) tank Yeap! XD maybe current car more aero and rain X still very fresh from December
i see. okok. the washer fluid is actually to wash dirty windscreeb right, does not act like top up for the rain x coating?