Outline ·
[ Standard ] ·
Linear+
[OFFICIAL]Rig Suggestion Q&A Thread V11!
|
ikan_semilang
|
 Mar 14 2016, 12:35 AM
|
|
[Budget] RM2000
[Purpose] Rendering video
[Hardwares that will be re-use]
Samsung SSD 850 EVO 120gb
1GB Western Digital Green
Seasonic EVOII Power Supply 750w
Asus GTX 750Ti 2gb DDR5
Dell monitor u2414h
[Monitor resolution] 1920x1080
[Games & softwares that use frequently] Adobe Premiere
[Personal preferences]
Intel Core i7 6700 RM1294
GIGABYTE GA-Z170-HD3 RM594 or GIGABYTE GA-H170-HD3 RM486
Kingston HyperX Fury 8GB DDR4 2666Mhz CL15 (HX426C15FB/8) RM195
[Location] KL
This post has been edited by ikan_semilang: Mar 14 2016, 12:36 AM
|
|
|
|
|
|
ikan_semilang
|
Mar 14 2016, 09:04 AM
|
|
|
QUOTE(terence_nwb @ Mar 14 2016, 07:57 AM) If you go with non Z170 mobo, you cannot overclock the RAM and it will downclock itself to 2133MHz even though you have a 2666MHz RAM. But jumping from 2133MHz to 2666MHz doesn't bring significant improvements (mostly benchmark only), > 3000MHz is more preferred if you really keen on high speed RAM. So should i go for z170 board? |
|
|
|
|
|
ikan_semilang
|
Mar 14 2016, 09:15 AM
|
|
|
QUOTE(terence_nwb @ Mar 14 2016, 09:12 AM) If you are getting Z170 just for the sake of overclocking the RAM (from 2133 to 2666), then it is not worth, performance gain is too little (bad price/performance ratio). Ok, will take note about that.. Price for DDR4 2133mhz and 2666mhz not so much different. |
|
|
|
|
|
ikan_semilang
|
Mar 14 2016, 11:19 AM
|
|
|
Should i go performance motherboard if run non K processor?
|
|
|
|
|
|
ikan_semilang
|
Mar 14 2016, 11:37 AM
|
|
|
QUOTE(Minecrafter @ Mar 14 2016, 11:33 AM) There's no such thing as a performance motherboard. No motherboard improves the gaming performance. For the motherboard, can go for the MSI B150M Bazooka D4, around RM399-419 and for the RAM, Corsair or Kingston Value RAM 1x8GB DDR4 2133MHz, should be around RM190-210..but since you render videos, would be better to go for 2 sticks of 8GB. I'm looking for atx motherboard. |
|
|
|
|
|
ikan_semilang
|
Mar 14 2016, 12:30 PM
|
|
|
QUOTE(terence_nwb @ Mar 14 2016, 12:24 PM) The Gigabyte ATX mobo (Z170 & H170) you listed earlier is good enough for daily use. If you are looking for so-called "performance" mobo, then it depends on how you define "performance", but they don't really provide any extra/significant "performance" to the system. About ram, any significant difference performance if using 2133mhz or 2666mhz? Price not so much different. |
|
|
|
|
|
ikan_semilang
|
Mar 14 2016, 05:02 PM
|
|
|
Ok, i'm decide to go this setup since price not so much different h170 and z170
Intel skylake core i7 6700 - RM1294
Gigabyte z170-hd3 - RM594
Kingston hyperx fury 8gb ddr4 2133mhz - RM175
This post has been edited by ikan_semilang: Mar 14 2016, 05:14 PM
|
|
|
|
|
|
ikan_semilang
|
Mar 15 2016, 03:37 PM
|
|
|
[Budget] - RM 4000
[Purpose] - Editing and rendering video
[Hardwares that will be re-use] none
[Monitor resolution] - using old monitor S2410L
[Games & softwares that use frequently] Adobe Premier
[Personal preferences] - prefer I7 skylake, dedicated graphic card minimum 2gb vram, 16gb ddr4 memory
[Location] - KL
This for my office.
|
|
|
|
|
|
ikan_semilang
|
Mar 15 2016, 05:09 PM
|
|
|
QUOTE(terence_nwb @ Mar 15 2016, 04:40 PM) Intel Core i7 6700 - RM 1294 Gigabyte H170-HD3 (D4) - RM 486 Corsair 16GB (8GB x 2) DDR4 2133MHz Value RAM - RM 324 Zotac GTX750Ti 2 GB GDDR5 ZT-70605-10M - RM 509 Kingston HyperX Fury 120GB SSD - RM 209 WD Blue 1TB HDD - RM 215 FSP Hexa+ 550W - RM 188 Thermaltake Versa H25 - RM 185 Total: RM 3410 (ETech price inclusive of GST) Thanks bro  |
|
|
|
|
|
ikan_semilang
|
May 3 2016, 11:33 AM
|
|
|
Between this two spec, which should i go for rendering video?
Intel Core i7-5820K Processor - RM1574.00
MSI X99A Raider socket 2011-3 motherboard - RM999.00
or
Intel Core™ i7-6700K Processor - RM1395.00
MSI Z170A Gaming M3 motherboard - RM710.00
|
|
|
|
|
Quote
0.0733sec
0.39
7 queries
GZIP Disabled