MOD..PLEASE DELETE...

This post has been edited by sempronic: Jan 11 2009, 10:04 AM

Omg, nice speed on the ram

Most X2 (Windsor/Toledo) would end up around 2.6-2.8ghz IIRC

yeah....this proc can ar....but it use really much power...
do u use one?

just upload screen of 2.6ghz....

This post has been edited by sempronic: Dec 19 2006, 05:53 PM

no one else using 3800+ Toledo core???

or someone have the experience using it can also share it together....

got a manchester core running @ 2.6GHz w/ 1.33v, have u tried to do further burn in to reduce d amount of vcore? it's a bit too high imo...

P/S: remember someone said before, if d temp wun kill ya chip, d voltage will, regardless how low d temp is...

This post has been edited by ah_khoo: Dec 19 2006, 08:18 PM

yeah...it is kinda high.....

but this is the voltage that can make the proc to boot into windows.....

did u use special vid in the bios??

nope, any combination is d same, i alwez choose d one w/ less fluctuation...

what do u mean by combination is the same??

coz my proc need to be in high voltage to make it boot into windows...

like now im using 2.521ghz = 1.5v.....

or maybe my proc not a good in OC?

try naikkn pmos/nmos, reciever impendace ngan drive strength.. setkn jadik 6...
naikkn vdimm turunkn vcore...



later will post the 2.7ghz pic...

This post has been edited by casperito: Dec 20 2006, 12:48 PM

okey...
aku try nanti.....
TQ....TQ.....

just did that....it just the same.....
maybe the proc just need more power to OC higher...

try to burn @ lower speed with lower voltage, there's no "cukin instant nudle" approach in overclokin. u mite end up hurtin ya chip if u want everything come in hurry...

bout d combinations thingy, u can have diff kind of setup of vid & vcore to a get a same voltage, just get d combo with less / no fluactuation is d best...

yeah....u have the point there.....but i already tested it...this proc just can boot at 2.5ghz at 1.5v...if the voltage is below then that it cannot boot into windows....but it is really weird..for proc to OC need really much power..

dah burn in cpu? how long?

burn in CPU also test prime right??
already done it before...and here is the best result....
here the result....



Attached thumbnail(s)

let's say 'goodbye' to our fren's rig here...
sempronic alreadi sold his mobo, proc and ram..
AM2 on the way...

f***er!!!!!!!!!!!!

what's ur problem??
got something with my fren here or me???

nice word there???

got any prob???

no need this thread anymore....

coz not using it.....just sold...

but for "quek".....what the heck???

got any problem?


This post has been edited by sempronic: Dec 25 2006, 05:31 AM