interested in narDA there..

btw i already got obs crius,would billow v3 better than crius?

buy 2 for both, one for me thanks

No idea, try watch the review and decide

Hmmm...
30ml lasts u 3 weeks....so each week you use 10ml. Very light vaper.

Maybe...just maybe, the juice is not the problem. It could be that you need to clean the coil(s) and rewick with fresh cotton. If u leave the juice in the tank for a few days (or a week), it could start to get funky and make for poorer taste when u add more juice.

Since you consume very little juice on a daily basis, maybe a dripper is more suitable for you. Less wastage than if an entire tank of juice gets funky.

Thanks snake1983 for the SS316L Clapton.

Ok noob question on TC since this is my first TC try.
I had set my temp to 200F and locked resistance to 0.28 Ohms. But when i fire the resistance still grows. Whats the deal? Up to 0.32 Ohms or at least where i stopped firing. Is it supposed to?

Ru-Lo DNA200
Dual Clapton SS316L
8 wraps each (6 inner)
2.5mm

PS: Not a master coiler. Supposed to get 0.3 right?

What wire gauge is that?

It supposed to lock your wire resistance once you locked it but 0.28 to 0.32 is not a to far high I guess plus, its SS316L so...

Not sure, perhaps others will give you a better insight on this

26g + 32g.

Found in some forum that the resistance IS locked but whats increasing is the current resistance. The chip will adjust voltage accordingly. - im not quite buying this or i mustve misunderstood the statement. Its not an actual quote but from my sleepy memory last night.

I cant seem to find a guide on rulo+clapton ss.

Resistance increase is normal on tc.

The resistance permanently locked once you installed the tank or RDA. Try plugging in other tank or RDA to change the resistance then put back your SS 316L tank or RDA.

Spaced coil is recommended for temperature control.

This post has been edited by TristanX: Mar 31 2016, 10:44 AM

By normal you mean the display will increase especially with SS coils right?

Did that swap. My actual room temp reading is 0.26. Found an app Vape Tool from google store which has options for clapton. Calculated, got 0.26. Im happy.

Spaced coil...this i was contemplating. I guess ill just go power mode for a while till my next build. Will try spaced.

Tq master brewer.

This post has been edited by Hamsom: Mar 31 2016, 01:32 PM

DNA or YiHi which to choose and why?

Any TC based wire will increase.

Also, 3mm or bigger diameter is recommended for coil size. Provided if you could fit it in.

I squeeze dual 5mm Kanthal 24g on TFV4 TF-R2 and triple 3mm Kanthal 24g on TF-R3. Tank gets hot very fast due to not enough air flow though.

Any reasoning for bigger diameter?
And spacing? I suppose spacing is due to the heat generated?

Testing on my dripper first as for now.
No wonder the TF-R3 prebuilt SS was wide spaced.

spaced coil they are better, contact coils will heat up pretty quick. especially clapton the reason why I purchased SS clapton is to overcome to heating issue but since I have twisted kanthal I don't it a SS clapton. 3mm and space it 5 wrap is what you might want to look into. don't go too many wrap if heating is an issue here. My ideal set up for dual coils built will be 5 wraps 3mm spaces u should able to hold down the heat issue. Try not firing too high too since the coils it still get heat pretty fast you should able to get tons of vapors and flavors no reason to go higher wattage.

It depend the wire you using too, if normal kanthal don't bother space la LOL kanthal just go maximum wraps only. special wire then have to concern what built to use. I rarely go down to .3 my own preference now .4 to .7 is more than enough. Firing 30w-40w already enough to generated fck tons of flavors and density. solid clouds production plus density of flavors. so good until I keep refreshing my cotton everyday just to maintain my juice flavors intensity.

do you guys use a jig when making a spaced coil? My spacing is always uneven

Use a coiling kit la, or screw driver 3mm diameter also can but I use coiling kit and space them.


Here built with coiling kit, you get the idea .47 38-40w ignore the cotton color chain vaping + half day gone cotton still good.


This post has been edited by snake1983: Mar 31 2016, 02:32 PM

Thanks. Ill try these on my next build. Heat isn't really an issue for me right now.
I like a little warmth in my clouds. Adds to the feeling, if not i wouldn't get enough satisfaction.
Well that is just me. Plus my RDA is mostly plastic type of material.
Fired mine at 30w though. Now testing higher and higher. Just finding that spot.

Still not getting how these temp work. I tried firing 70w once for good 4 5 secs last nite.
And the temp didn't kick in. I wasnt inhaling at the time. Tried to smell the cloud, smell a little burnt.
Not as bad as kanthal would though. I set it at 200F the lowest there is. Locked at 0.28.
These is what i do not understand yet about TC on DNA200.

EDIT: Temp works after i chained.

As for power mode. Everything seems well.

Thanks for the heads up guys.

This post has been edited by Hamsom: Mar 31 2016, 04:18 PM

Bigger diameter allows you to put more cotton. More juice in the coil reduces the chance of dry hit or burnt cotton.

Spaced coil reduces compressed heat.

Yeap as what i had figured..so it was correct.
Ok cool. Probably recoiled tonight.

Now i understand the clean feel of firing SS compared to Kanthal.
Osam - excited.

Don't ignite the fire of war my friend

I personally played and owned both device before. Not much differences for a noob like me as I don't use TC.