QUOTE(duke_hunt @ Feb 18 2016, 11:59 AM)
i suspect u got the wrong gauge wire for the Titanium Grade 1.
i have no issue with 26g i'm using right now..
moreover, its not meant to be torched.
read here on Ti Grade 1 guide
Craft Vapery Ti GuideQUOTE(andyng38 @ Feb 18 2016, 12:34 PM)
Just a bit to add to duke_hunt's good post #1235...
Re: springy Ti...yes indeed it is springy. Get a good pair of flat-jaw pliers and pull the wire very VERY tight when coiling. There will still be some springback, but it can be generally negated if you use a mandrel that's 0.5mm smaller than your intended coil diameter (eg use a 2.5mm mandrel to make 3mm coils, 1.5mm mandrel to make 2mm coils so on and so forth). I use 28 gauge Ti and don't have much problem making 3mm diameter coils that way.
thnaks for the tips,im using 28gauge too,so,its not a good idea to torch it like duke said?
QUOTE(TristanX @ Feb 18 2016, 12:44 PM)
After started using SS 316L, I didnt go back to other wires. I like the clean taste. It also supports power mode if the mod doesn't have SS 316L TC.
And yes, you can dry burn SS 316L.
wanna try SS,but my tc mod doesn't support
is it safe use in power mode?