kah kah kah

Anyone interested in this set, RM900 for all. titanium stealth bought on october.

Sad to let it go, funding for valentine's day gift

This post has been edited by nles: Feb 13 2016, 12:08 PM


Attached thumbnail(s)

I don't own a cuboid...yet! But if you're feeling adventurous, you can try lowering the TCR for kanthal and try firing at a higher temperature. It may or may not work on your mod (and you do so at yr own risk!). I've experimented on using kanthal in TC mode before...for some mods, it won't work but for others, it does. You MAY have better luck with a spaced coil than contact ones.

The TCR (Temperature Coefficient of Resistance) of kanthal is very low; its' resistance does not change by much when heated (unlike nickel, titanium & ss). When you lower the TCR and fire at a higher max temp, it is in hope that the change in resistance will be large enough for the mod's chip to recognize and allow firing, instead of jumping into power mode to protek you.

For your SS's sweet spot being elusive, you may wish to play around with the TCR and temperature. Experiment in small increments/subtractions. As I said, I don't own a cuboid yet...but I have a feeling you may want to lower the TCR and temperature a bit first, and see if the vape quality improves.

Since you have stainless steel, I'd forget about using kanthal on TC mode, unless you just wanna experiment. BTW hows the cuboid holding up? Fire button still solid and rattle-free?

I saw n9ne.my selling rm260.

I had myman and muffin man before. Not bad. Just bought milkman 2 days ago. Crap. No taste. I think mylk strawberry is waaaay better in flavouring.

I have tried single and dual rba.
Triple coil and quad coil occ. I have to say quad taste better but have to fire around 120w and it sux the juice daaaamn fast.

Thanks bud, but nah I'm not using for kanthal for tc though, but thanks for the advisory


Good mod solid as fck and good handfeel, just it heavier than ipv4s but overall super fine mod. Also no rattling button.

WTA

how to make my dna200 detect my ss316 as temperature coil... currently fire like normal khantal...
when put my crown on my vt40, works like charm... but rulo dna200 cant detect my coil...

AFAIK, Evolv doesn't have ss profiles for TC yet. The DNA40's profiles are probably more lenient/have broader resistance ranges and your ss coil can be used while in TC mode (but don't let that fool you into thinking that you're getting proper protection), maybe because it's only 40W max, as opposed to 200W.

http://www.evolvapor.com/datasheet/dna200.pdf

See page 3.

adoi.... just got my rulo dna200... i tot can achieve more wattage than my vt40 with ss coil... using ss coil on rx200, always give me temperature protected msg after 1 sec puff..

Hello P4U IPV5

Maybe I'll have to partially correct myself...it seems you can create a custom profile for yr DNA200 to use SS:

http://evolvapor.forumchitchat.com/post/uw...-tcmode-7610469

Hope that helps you.

cool thanks... will try it..

Dear fellow vapers, I'm running a dual coil mini velocity at 0.18 ohms on Wismec RX200, what will be a sweet spot range be? thanks

Milkman taste fine for me.

Yeah, TFV4 TF-R3 does not have much space per coil. Running 2.5mm 5 wraps Clapton now. 3mm is a squeeze. Still, insane flavor and clouds.

Uuuh...I like the... colour? I guess..

Well, there goes my hopes and dream. Still tho, imma wait a couple of months more until P4U release an IPV 5s

Hmmm.... as usual ~ IPV still very bad in casing design... sad....

Torn wrappers? Rewrap your batteries!

If you need shrink-wrap fast, altsmo.com sells them, RM2/m. Got mine when I ordered some attys. If u can wait for the slow-boat from China, Fasttech is much cheaper and has pre-cut wrap of various colors. Maybe u can find some in Jln Pasar too, or buy from an electronics repair shop near u if it's very urgent and you have no other spare battery.

Cut to 73mm lengths for 18650 batteries, remove old wrapper, pop the insulator back on on the positive, slide on the new wrapper.
If you don't have a heat-gun, a candle will do to shrink it. I was leery of using my butane torch and opted for a slower heat source, shrinking the positive end first so the insulator stays in, then moving along the sides to the negative end. Rotate and move the battery while heating to prevent scorching. The scotch-tape's (used to secure the roll) gum residue on the shrink-wrap was not removed before I started heating, resulting in some black residue on one of the batteries.

And yes that's my old ash tray from my former smoking days, used as a candle-stand now.

VE only had it in blue. Yes better wait for the god damn next release. Im sure on the IPV5s they will fix the shitty loose magnetic battery cover.

But i do love the design. Also the "deep" (like D2-D3) screen that can be scratch free compared to 90% of shitty mods flat screen-body design the moment you put in the pocket it scratches.

Now all i neeed is Yihi SX Pure tank to test it with this mod.

i think sweet spot is differ from person to person,as for myself,i like hotter vape between 0.2 to 0.3...0.4 to 0.5 is warm and not bad tho in my opinion...

Brosss,

Need to know ur opinions about coils..spaced or tight?

Im so used to tight or close coil..but today I made a spaced coil and the taste is much better..

is it spaced coils better?