Hi,

I'm looking for advice for some basic reno work for a new 1490sqft 2-storey terrace house. I planned for:
1. Kitchen cabinet (11ft concrete and tiles top, base unit only with 4ft counter)
2. Installing aircond, fans, lamps
3. Tinted and grill
4. Vinyl flooring

I will only use 1 room as bedroom (only bed inside though). Others are for laundry room, wardrobe room and home office. I won't be needed any wardrobe or tv console unit as I will not be watching tv much, and for wardrobe, I prefer DIY open closet only.

My budget is 20k-30k including furnitures and cost of buying airconds, fans and lamps. Is it possible?

Thanks..

This post has been edited by billsean: May 14 2021, 11:18 AM

normally we do mix and match material , depend the design we have to consider the loading and material size then do the design ,
for example board maximum length 8 ft , but tv panel 5 ft x 8 ft condo lift cannot masuk then we have to make some design or other material to match it

Can taiko here recommend me contractor for simple renovation like install light, painting,grill and curtain during this pandemic?

Look nice do you have photo ?

For kitchen cabinet, it has different types of cabinet door, i.e. Melamine with glass, 3G acrylic, 4G acrylic, 3G glass and 4G glass..Would like to know what are the differences and which one is suit to be installed in wet & dry kitchen? Thanks!

To all the interior designer here.. i need quotation for my new house. its a 2 1/2 storey terrace house. i prefer one stop renovator which can do Carpentry,painting,lightings and curtains too. if not separate contractors will do too.. pls pm me so that we can discuss further.

Thanks

all this material same durable ,
just the cost different may I know how much budget you plan for cabinet ?
normally I suggest melamine or aluminium for wet Kitchen
and dry kitchen suggest melamine too , because melamine got lot of colour choose .

I haven't plan my budget yet because next year 3rd quarter VP , this the quotation I get
price reasonable ?

Hi,

I'm looking for ID/contractor to do additional furnishing n some reno for my recently got my semi furnished condo, 2nd hand like 2-3 years

Appreciate your pm... Thanks

ya this company price reasonable and got very good reviews don worry .

sure please check your pm

Hi, do u know where i can go to get MDF boards in small quantity, maybe 10pcs 4x8' sized ones incld delivery? Area is cheras.
For my own DIY project
Thanks!

Hi,

yea, you can go to Cheras Sun Rite or Sun Rise Furniture Hardware,we called it Chew Yeong. My ex office stated nearby there, so mostly will go there to get it. Now move to Kajang area. So seldom go there.it nearby the kampung cheras baru.

if u come from the round about of kampung cheras baru, go will pass by a petrol station on your right. and u reach a traffic light. after that u go straight.u will noticed a field and mamak stalls on your left hand side,slightly slow down and u will see a bus stop on your left hand side, just behind of it. u will see the hardware shop. opposite is a mosque.

hi, planning to do renovation for new house. please recommend 'reliable' contractors in Klang Valley, please.

Looking for interior design contractor for house renovation. appreciate if anyone can recommend good contractor

Hi bro feifeikon,
Just have doubt. Why the plywood TV cabinet is an expensive stuff, cost around 5-6k.
Is the wood expensive or workmanship?

How much the below cost if it is 10ft width 6ft height?




This post has been edited by Vleesh: Aug 25 2021, 10:32 AM

Hi, i will be planning to do renovation to my subsale unit in bukit jalil (1003sqft), would love if anybody can introduce a good reputation ID for design and renovation. Thank you in advance

Hi guys, I am planning to purchase an 30 years-old single storey subsales house (1200 sqft) at Malacca, but the house condition seems like not really promising with wall cracks and aged wiring..
The house owner shared me their original plan layout and the so-called new layout design..
Are there any sifus can help to estimate the cost of renovation, I may pm you the layout and photos if it helps in the cost estimation

Thank a lot in advance

Hi,

From your information,

1)Wall Tv panel.

RM 80 x 60sqft (10ft w x 6ft h) = RM 48000.00

-your maximum using for pcs of lamination.cause each laminate come with 4ftx8ft.so max will use 4pcs to cover 6ft x 10ft. assume using wood grain FORMICA brand, RM 1xx.xx, Give you MAX RM 200/pcs .But if they give u Ixa, IzDexign, Mxica or those bangla brand can as low as RM 7x.xx-8x.xx/pcs = RM 800

-Sifus + medium skill, 150 sifus + 100 medium skill = RM 250 x 2 days. Fully install your TV panel. 1 days on factory , 1 days on site installation . = RM 500 .(market is RM 120-140 for situs , RM 80-100 for medium skill)

-Raw Materials , likes blockboard or plywood . RM 700

-Etc,those glue and nails , screes. RM 200

-Company profit . 40% of costing , RM 2200..- RM 880

-Grand Total RM 3,080.00, kasi u discount RM 80.00 - Final RM 3,000.00

2)Shelving

RM 120 x 10ft w = RM 1,200.00

3)Lighting T5, use 10 nos. 3ft x 3 , 1ft x 2 for top and 3ft x 3 , 1ft x 2 for bottom,

RM 50 per set x 10 nos = RM 500(any electrical hardware shop can buy , with i stated price RM 50/ set.)

4)Transportation = RM 200

Total RM 4,900.00 .

+Drawing Fees RM 300

+Saliva fees RM 100

+Commision for SalesPerson RM 400

+Your final payment request for discount RM 300

Final Total ngam ngam RM 6,000.00



Expensive or not . its all depends .

this is usefull info. thx