Login as root, tried the password when i install breed , message is wrong password. tried a few password that i know , butt all to no avail. Any solution? Thanks

dude... your username is admin... why you use root to login

because this is a linux device, and historically root is the username for admin so that's why he put root

Got it, thanks

Hi there,

Thank you for compiling this.
Was running one of Padavan's previous builds but did not have Hypptv & OpenVPN support.

Installed to my router , everything works fine!
Anyway to get ipv6 working ?
and also no QoS support ?

This post has been edited by zhuoyang: Jan 19 2016, 10:21 AM

Hi, just want to ask if i install follow the instructions and install the breed bootloader and padavan's firmware... can i install OpenWrt Chaos Calmer stable version directly?

Because we flash the breed bootloader , can i revert it back to stock firmware with the normal way?

And what is the <CURRENTPASS> ?

This post has been edited by ramnkc: Jan 19 2016, 07:31 PM

yes ipv6 works fine, but you have to configure it.

I didn't play with QoS yet, the version that i had compiled doesn't have QoS enabled.

if you just want to install openwrt, there are easier way, just follow the openwrt wiki.

How to configure ? I was able to get ipv6 public ip but looks like there's something wrong with DHCPv6 because ipv6 test failed

Hi I<3LYN, I've completed the setup but for strange reasons, the LAN1 port doesn't work if I change the VLAN LAN(number) for either ports. The effect could also apply to LAN2 port.

This post has been edited by UserU: Jan 20 2016, 04:32 PM

This is my config,



ignore the DNSv6 server 1 since i am running my own DNS server.

you can use google dns if you want.

what do you mean by LAN port doesn't work? what are you trying to do with it?

can you post a screenshot for the section?

I'm connecting two PCs to the router via Ethernet cables.

Will upload the screenshots soon.

I<3LYN, here they are:



Even if I were to fill in the last field for LAN1, the error switches side (Limited Connectivity). Troubleshooting the affected client returned the ("Ethernet Doesn't Have A Valid IP Configuration") error.

For instance, PC1 Ethernet (LAN2) has the limited connectivity. If I configure the settings (add values), PC2 Ethernet (LAN1) would now have the limited connectivity, with PC1 connected to the network.

This post has been edited by UserU: Jan 20 2016, 09:11 PM

hence you're not using hypptv right? then you should just disable the STB port, by selecting Choose IPTV STB Port -> No

Not using it at all.

Thanks, it worked

i had flashed the padawan successfully, however after entering my unifi id and pw, the connection status is "waiting for ppp client connection"

I tried to put in google DNS
2001:4860:4860::8888
2001:4860:4860::8844

And tried, the system show i grab but when i tried to access to Sarawak report new portal site, its still blocking it. I turn off the ipV6 setting then its working... custom DNS for ipv6 not working?

And mine to share the source file and where you made the customization? Or you have the latest padavan firmware customize build?

This post has been edited by ramnkc: Jan 22 2016, 11:18 PM

hiya, is there a way to do this for the smaller version of xiaomi router? the youth version? that one is without USB slot, so how can i perform this flashing without the USB?