Greatz to know you don't need additional router for your home.

Just to answer you question here, on 5gz repeater mode - I find it is very stable for the my Xiaomi Mini.
If I were having a direct sight between router in a distance of 3M, they always stay linking at 867mbps.
The setup is linking or repeating over 5ghz and sharing to devices on 2.4ghz. Of coz sharing on 5ghz is also possible same time, but it is connected directly to main router.

Then getting a bit of fluctuation with link speed 4XX-867mbps on my another tested setup, the main router was in the living room and my Xiaomi Mini in the last room space apart around 7-8 meters with 1 wall and door in between.
With these setup 5ghz for linking routers and running on 2.4Ghz for devices, I manage to speed around 4X-5Xmbps on speedtest.
This is as good as connecting to main router at 2.4g wifi.

http://www.lazada.com.my/xiaomi-mi-wifi-ro...k-11474236.html


is this the router that you guys are talking about

im thinking the same.. i got TP-link Archer C5 for Unifi.. but in dun know why.. thic C5 always sudden hang/restart on daily basis.. thinking on using Mi router as well...

hi
i forget my pandavan root password
can any ppl know how to retrieve that password?
cause i plan to install transmission and play on it

Default padavan firmware password?
If yes, read 1st post again.

already change
but forget the password > <

No idea on how to resolve it.
Are you having Xiaomi Mini?
If yes, maybe can boot to Breeder recovery mode to reset or reflash firmware?

i am using xiaomi router 3
i finish flash padavan already
but if i not wrong i never flash breeder this thing before

I suspect you need use the Developer ROM/firmware and flash it using the USB drive with hard reset method. Then flash again padavan with the existing procedure using Prometheus.


Good luck.

yup last time i am use promethues to do
using vmware

hi im also interested in getting a xiaomi router 3 ... do you know any website with step by step instruction to flash padavan ? so far how is your xiaomi router 3 after flashing with padavan ? more stable than the original one and can support vlan tagging ?

haha i flash before
but i follow chinese tutorial
i am use vmware to do it
yup i use 1 modem connect to my xiaomi router and then settle

Hi can share me the link for you tutorial ? maybe can use google translate for that tutorial.. thanks

actually they got photo you can follow the guide
they are quite similar as xiaomi router mini
but the guide
i forget
give me some time to find it back

For those who interested to upgrade to latest commits.

Note: At your own-risk. I compile this for my Xiaomi routers use.

Xiaomi Mini
MI-MINI_3.4.3.9-099_5aa2a75.trx
https://mega.nz/#!to4TFbLY!k3XCeOEs...cr4V65P21Pi0Vzg


Xiaomi Mi-3
MI-3_3.4.3.9-099_5aa2a75.trx
https://mega.nz/#!d1QVEZhD!bJAjTO7o...BCEHd1IimY_dy9I

Any tutorial for flash this I'm have a mi router also plan to flash

Above is for update.
To flash from original firmware pls refer post no.1 and use the search function. Lastly Google!

Cheers

bro is this mean if success im just use one device to access the unifi or i still need a router plus AP..??

bro can u do the job for me i pay u a mean .... if using the maxis fibre also can ..????plus after the job we just plug it and this only device we need for maxis fibre o we use it as a router but still need a ap ..???

To be honest here, I not experience with Maxis broadband setup.

I have only tried on unifi which using vlan tagging at ViD500 for internet and ViD600 for IPTV.

As for Maxis it is using VID621 and you should able to plug indirect to BTU LAN port 2.

Lastly, I'm sorry, I not able to help as I'm in Penang.
Maybe other user here can help you. If you will to spend, I would recommend you go for other off the shelves router that support maxis, example Asus.