If you can't get it on 192.168.1.1
try also 192.168.31.1 (make sure your computer also 192.168.31.X)


If not mistaken your router in a state only Breed bootloader is running which is part of the process.

You need boot the bootloader mode with reset button press while powering. Release only when you see the orange light is blinking.

Lastly, you are having Xiaomi Mini right?

This post has been edited by muncheno: Nov 11 2016, 11:33 PM

Thanks for the help very much i will try it again.
Yes is xiaomi mini.

Succeeded. some how i find my reset is quite different. when i reset the router, the LED change from pink to blue blinking and that its, login into 192.168.1.1.

once again thanks to muncheno so much for guiding.

guys a quick one.
If i keep using the Prometheus to flash/upgrade the firmware, do i need to keep making backup?
i'm afraid the router will be out of storage.

Welcome and enjoy

U only need one backup and u can move the backup to other location.

The backup should be your on PC and not your router if you are using the scripts.

Ohhh... i thought the backup will be at the router itself.
Cos am always using the Prometheus to flash
Thanks

double post

This post has been edited by silrave: Nov 12 2016, 11:26 PM

any sensei here success flash asus rom in xiaomi router 3

Yes, pls read this thread from 1st post and few pages back.
Flashing Asus firmware does not come easy for beginner.

haha i yesterday stuck
i keep on fail to connect after i get the ssh

wan to ask how to reset root password?
because i find out i keep on fail on this

http://192.168.31.1/cgi-bin/luci/;stok=<...<NEWPASS>

i try to reset router still the same

Not sure you at which step or what did u do.

Read urself.

https://forum.lowyat.net/topic/3828356/+180

This post has been edited by muncheno: Nov 13 2016, 03:48 PM

haiz try my best
yesterday i manage to change the root password
then today i wan to change the root password also fail

R u running a developer firmware and make sure it is older version.

If u on xiaomi firmware, just reset it and you will ask to set password again. Choose not the same password for router.

ya i download developer firmware
i fail to login right
i try to use ssh that root password then success XD
because i try to change password it fail

now i follow your guide
thinking see how to get linux terminal

I'm still unable to telnet the router. I'm getting this error message in step 6 "{"code":1523,"msg":"参数错误"}"

U r trying to flash ur Mi-mini router?
Are you on correct developer firmware? Never one might not work.

Without much details here, I can only tell you not to telnet, instead use SSH method. Telnet is a mistake.

Ya, I'm trying to flash my Mi Mini router. But I'm not able to telnet or SSH follow the method. Even I get the SSH from Xiaomi website to gain the SSH access I still unable to get into the router SSH.

Care to provide details?

Are on developer firmware? which version?
You flash miwifissh.bin file or not? or you using <STOK> code method?

Good night.

i download the miwifi_r3_firmware_e87c6_2.13.75.bin then flash it in the router page
after that download and install apps into my mobile phone
then i get ssh root password

i try to use winscp i can login with the root password
but i try to run the url link change root password failed