i couldnt connect the printer using router. anyone has this problem?

Try to read the printer manual in CD/DVD that came with it OR download the printer manual from Canon website.

This post has been edited by WebWalker: Dec 11 2015, 03:19 AM

would definitely be 2 things that come to mind

1 check and recheck that your router (eg its box or manual) would show if it has this feature which is shared printing usually via the USB port on the wifi router - but dont just take for granted that just bcos your wifi router has usb ports it neans that it has printing features

2 also to do with the wifi router assuming that you have checked and confirmed point 1
then you will need to separately install a program on your laptop or desktop to enable wifi router usb port\
recognision for printting eg take this router as an eg



not only you need to START the service on your wifi router after plugging in the usb cable to your printer

but you will also need to read that manual that came in your wifi router box or online as shown

then download an initializstion program to handshake a protocol for the usb shared wifi printing to start

of course these are all very general and only an example but yours will be more or less this way too\\

\\ so do your due diligence and with this we wish you luck

I just browsing some tip to fix my issue and found this post...just wanna know how to fix my problem.. I just using unifi wifi from streamyx wifi yesterday and suddenly when I want to connect to wifi printer its wont successful. tried to unintall and reinstall back but cannot proceed due to below:

"Failed to acquire information on the driver and software. check the network connection and try again"

my connnection is ok..everything is ok..just when want to install drivers prompt above error...anyone have encountered same error?

could you specify what types & model of router that you are using?
Maybe theres a specific setting in your router manuals.

https://www.youtube.com/watch?v=70lZuWuSkMg#action=share

I believe your this Canon G3000 printer is build-in Wireless.
Have you do the setup for the wireless connection between printer to router yet?
If did, it should be can print when you connect to the router.