may u buy even more god stuff in the years to come..😆

Yeah I ordered those 510 stands from FT too.

Been buying far too much vaping stuff .. some of the tanks (Crius, TFV4, Crown) I have in both black and silver to match different mods 

I have a drawer full of juices etc.

And some of those Daiso boxes for wire - I think I've got some of every guage of Kanthal (ribbon, round), Ti, Ni200, 316L (but only really using 316L at the mo..) .. now looking for 317L to try

Not like that lah. I'd be really happy if the Rolex RX200 worked flawlessly. But now it feels like cheap 'pasar malam' fake Rolex.
Really frustrated that the TC is a big fail and I can't get a good vape out of it. Chip efficiency isn't very good on it either - battery life is shorter than I thought it would be.

Chipong...... Now you're laughing at others! I remember when it was so hard to make you understand how to use Joule mode to access step down. Lol!
You're supposed to pass it forward and teach the newer users.

I'm used to the D2 - a batt will get me more than a days usage. 3 batts in the Rolex gets me about 2 days plus of use.

You did not even know how to lock in the resistance. After that you were asking what resistance to set at! LOL! Go look at your old posts.

My nitecore 2 slot end up never being used, just charge my rolex using handphone charger.. Will it do any harm?

I've been using my RX200 quite a lot - SS 316L in TC on the Crius mostly. No problems on my side.... Not really tried with Ni or Ti though

whoa. quite a good offer. thanks for posting this. but have to go to kl 

p/s: my russian 91% is still available for sale. any takers? come come take it off my hands please.

i'm in the process of getting a bigger label, hence the reason current label is not tall enough. once I found one then adding other infos to the label wouldn't be an issue.
ade je. but my 3mg is like local 6/9mg, you sure you vape 12mg? 

IMO 12mg is more suitable for creamy-based, like my unicorn clone, or beard vape clone. throat-hit + creamy = OK, throat-hit + drink macam pelik. anyway to each his own la
-------

anyway, what's with the blinking POS in nebox after firing a few times, even on full batt? nak pakai 30W pon tensen. Currently vaping at 22W + .45o ni200, and after chain vaping for a few mins (or less) it'll start to blink, and I have to wait a while before firing again. So dissapointed... I don't think this is how TC mods are supposed to work, right? Coming from a regular mechmod firing at 70W-43W @ 0.25 or less, this is dissapointing. using the same batteries, samsung 25Rv5 light-blue. Are you regulated mod users used to these sorta thing, or it's just a nebox/kanger thing?

I see, thats very helpful. Yeah previously the stock space are quite big, now the space is like the kanger coil space which very small hole to fit in cotton.

Another question, what is the preferable space you guys fit in and wire selection, I just want to continuously vaping without worry the cotton burn up too fast and flavor gone.

dunno why since yesterday till today, when i recoil i always got imbalance heat on both coils.. one heat up faster than the other.. really a hassle, recoil many times.. the coil diameter suppose to be similar as i used coil jig.. this morning i was working with my coil since 10am until 12noon! finally got it glow quite evenly, but still not that perfect imo.. luckily on holiday, if during working days how am i gonna live like this? to make it worst, losing juices becoz of recoiling works.. now missing my uwell crown, less hassle on single coil..

wraps are even and tight, but maybe bcoz of the screw, the screw heads are kinda abused already (thats just for after few days usage) really dislike the hexagon screw.. another thing is that the clapton wire, maybe when i thighten the wrap, the outer wire got pulled which may results on uneven lenght of the outer wire.. i really need more practice on this
becoz i recoil many times since yesterday.. even after i think its done, cotton up and refill tank, then i kinda curious so i recheck coils, only to find it back to heat up unevenly, then recoils.. apart of that, almost ran out of clapton coils which i just bought several days ago (and its blardy expensive).. now i think its ok already.. hope this can serve me for several days..

out of all, my personal problem is that i tend to be perfectionist.. i want to ensure coil and wick done beautifully (yes i really mean beautifully).. hence it took me long time to fiddle things.. finger also hurts already doing this thing 

my money ran like no tomorrow since i play with this vape things

Waaah..... chipong become master oledi!

Ah, still wanna play.... Go find where I said the D3 is firmware upgradable.

Your HappyTetek REQUIRES lots of firmware upgrades cos its trying to fix everything thats not working. And yet theres still plenty of complaints that it still doesn't work.

Run along and go play with your other Joyetech/Happytetek fanbois.

We're having a stock clearance sale of our premium US juice brands, Blackstone and Vintage Reserve flavors.
Blackstone (was RM85) - now RM50
Vintage Reserve (was RM95) - now RM55

For more information, please visit our post @ https://forum.lowyat.net/topic/3727005

was eyeing the ipv4s, any comment on this mod? where to get this mod for cheaper price?

clone only... i bought it coz of cheap sale.. RM20 no way can resist   

vaporboy or una testa vapor

both shop is at bangi area

https://www.facebook.com/UNA-TESTA-Vapers-529106940456861/

Yes

Tried on another nebox with a new 25R, vaping at 40+ W with no issues. So either mine dah  rosak or my batt is dying (which is weird cause I have 4 25Rs and all exhibit the same issue).

Haih... Mechmod  jugak yang reliable

Why does my coil burnt faster? I just changed the coil yesterday. Is it my wicking?

Using goliath v2 24g kanthal getting 0.4ohm and vaping at 25watt