This is a quick simple guide on how to unlock the phone bootloader

Make sure you had register a Huawei ID first. You can do it from the phone or at its website at : https://uniportal.huawei.com/accounts/regis...Register&nls=en
For phone number - just put in any 8 digit fictitious number ( I use 12345678)

After ONLY 14 days than go to :

Log in your HW ID and go to this site :
http://emui.huawei.com/en/plugin.php?id=hw...ad&mod=list#_=_

Choose unlock bootloader tab at top right
You will than be guided how to get your unlock code
For Product ID, use dialpad and dial *#*#1357946#*#*
You will get a 8 digit Product ID

Follow the steps thereafter and you will get a 16 digit number UNLOCK CODE

Switch off phone
On PC, go to folder where you had install the SDK/Fastboot commands : browse to the folder android-sdk-windows/platform-tools : on notebook press shift and right bottom of touchpad and select Open command window here
You will go straight to ms dos mode directly to the folder

Switch off phone. Connect it to PC. Press vol down n power simultaneously and phone will boot to Fastboot/Bootloader  mode
Type in following commands :

fastboot devices ( you will see phone detected with a series of numbers)
fastboot oem unlock xxxxxxxxxxxxxxxx ( xx...xxx is your 16 digit unlock code)

Reboot phone and your phone will be 100% wipe clean and bootloader is unlock
Be WARNED you will see an annoying message about bootloader being unlock and phone is now unsecure before the actual HW boot splash screen. This warning message I noted crops out only on Marshmallow phones ( Nexus 6P too) and never in Jellybean or Lollipop firmware

Download the slim version of Android SDK here :
https://drive.google.com/file/d/0B9a0ULZKQL...DNtS3gzMFk/view

More info here on how to install TWRP and root your phone if needed :

http://forum.xda-developers.com/mate-8/gen...nstall-t3301371

If you wish to remove the annoying warning message :
MUST Factory reset phone first
Boot phone into fastboot/bootloader mode

Type :
fastboot devices
fastboot oem relock xxxxx..xxxx (xx.xxx is your unlock code)

I  tried before but failed. Will try again next time

Updated my msian set to latest b180

[attachmentid=6325337]

How to update ?
Download the update.zip n extract all its contents
Create a folder dload in either internal memory or ext sdcard
Copy the extracted contents into the dload folder
Switch off phone
Press both volup, vol down n power button simultaneously
When phone starts to boot , release only power button
Once you see emui logo than only release the vol buttons
Firmware will be updated than
You could see twice reboot before phone is fully started
The update process takes about 1+ min only
All data remain intact

Should i do this on my 3GB? I want to switch to this from my faithful note 2.

Check back yesterday posting, one 3GB ram user had reported updating it successfully as he said the model number matches the 4GB model

because you uploaded using photobucket, actually you can upload to lowyat.

[attachmentid=6336838]

not sure y they want to disable it