Can somebody verify that is this the correct method of checking is there any connection between 2 wall LAN/CAT socket which are at the same floor.
I do not know is there any cable inside the wall LAN/CAT socket.
Purpose is to connect the hypptv to the router which are not at the same area.

If not, what are the correct method?

Thanks!

I try before to connect the router LAN 4 to the wall RJ45 & the other end connect to my hypptv tv Ethernet port but it won't work (no connection).
That's why i want to test is there any connection between wall RJ45 of router area & hypptv area.

no light on the router.
Meaning that no connection.

Call TM, need to connect LAN cable directly from router LAN 4 port to HyppTV Ethernet port.

Will it works if i connect the LAN cable through RJ45 sockets?

Thanks.

I suspect developer only install the RJ45 sockets without cables inside.
If true, i need to install the LAN cables between two RJ45 wall sockets.

Anyway thanks for your help.

normally for new house, any idea during rj45 socket installation, does it included lan cables as well?
if included, then i suspect cabling were not done correctly.

there is connection for rj11 socket, but don't why no connection for rj45 socket.

yes, mstang52

there are 2 rj45 socket, one at the modem area, another on at the tv area.
Both at the same floor with distance about 10m.

yes, there are 3 RJ11 sockets, 1 RJ45 sockets, 1 optical fiber sockets, all installed on the wall.

another at the tv area which consist of 1 RJ11 sockets & 1 RJ45 sockets, all installed on the wall too

ok, i'll check tonight.
Thanks a lot!

There is only one rj45 port beneath the staircase.

Yes,connect to router lan 4

No connection detect when turn on the hypptv. Try connect to my pc also no connection.

No box.
Any picture?

Any recommended homeplug? Budget around rm70.

Only 2 RJ45 sockets available at my house, all at ground floor.

Remove this small box to check the wiring right?

May i know what do you mean by order of booting the machines?
i'm consider buying the powerline kit too. Any recommendation?
Thanks

i plan to buy TL-PA4010 but do not know is it compatible to my house 3 phase wiring & stability of this home plug.

Can somebody help to check is this the correct wiring connection for my wall LAN jack.
Thanks.

This is the color code for T568a & T568b wiring color code.
Look like the developer wiring man mix the wiring connection for T568a & T568b.

Problem is there are no connection from my hypptv & router port 4 (connection through wall lan jack).
Is this the causes?





Attached thumbnail(s)