Outline ·
[ Standard ] ·
Linear+
Unifi Connect UniFi HyppTV Set Top Box Through WiFi
|
Max
|
 Jul 9 2018, 11:24 AM
|
|
QUOTE(perseides @ Jul 5 2018, 08:49 AM) [attachmentid=9897458] Hello sifus, Refer to the schematics, I need to connect my STB and PC in the living room to the router via a homeplug. Is there a way to reconfigure the router so that I do not have to change the wire to the router every time i use the PC (internet connection) and vice versa (HYppTV STB). (NOTE It might be confusing but homeplug B had 2 ports.) Does this require a VLAN trunking or smth??? Thanks if RG > homeplug A <---> homeplug B > router > pc and hypptv box.  |
|
|
|
|
|
Max
|
Jul 16 2018, 12:14 PM
|
|
|
QUOTE(yvliew @ Jul 16 2018, 11:50 AM) hypptv box connected lan from router does not utilize your actual bandwidth right? It uses a dedicated bandwidth for hypptv. So if you connect via wifi, does it use the bandwidth that is shared across other devices? The 2nd wifi already tag vlan600. So wont take internet bandwidth.. but maybe 'wifi bandwidth' ? |
|
|
|
|
|
Max
|
Sep 19 2018, 10:39 AM
|
|
|
i tried using wifi for the hypptv. using the ZTE vdsl2 modem+router+wifi.. can connect, but damn lag and stuck the hypptv..  |
|
|
|
|
|
Max
|
Sep 20 2018, 07:33 AM
|
|
|
QUOTE(amirul hafizz @ Sep 19 2018, 10:36 PM) u mean, hypptv everywhere aka unifi@playtv or unifi tv with stb box unifi hypptv stb android box. not unifi playtv on9. |
|
|
|
|
|
Max
|
Sep 20 2018, 02:58 PM
|
|
|
QUOTE(amirul hafizz @ Sep 20 2018, 09:26 AM) unifi tv can't connect via wifi. can connect via wires only at port no: 4 at ur modem.  have u notice this thread title and read all the post inside ?  |
|
|
|
|
|
Max
|
Sep 20 2018, 04:23 PM
|
|
|
QUOTE(amirul hafizz @ Sep 20 2018, 04:17 PM) no friend, b'coz i am new friends in lowyatt forum. should have read the title and some of the posts.. hypptv box with wifi is doable.. but maybe the box not enough juice to process all using wifi. |
|
|
|
|
|
Max
|
Sep 21 2018, 07:26 AM
|
|
|
QUOTE(amirul hafizz @ Sep 20 2018, 06:06 PM) if i using with wifi to stb. how about bandwith. b'coz i am unifi lite 10mbps. if i used wires to stb, bandwith can't used. picture full hd 1080 pixcel. read some of the earlier posts. equipment also must support wifi vlan tagging |
|
|
|
|
|
Max
|
Nov 28 2018, 02:43 PM
|
|
|
QUOTE(vivixeon @ Nov 27 2018, 09:24 PM) Guys, im having problem with hypp tv.. i just got the new STB from unifi.. im using router tplink archer c9.. follow all the step, internet connected but iptv no display.. it keep on showing satellite with x mark on iy New STB? U have to call TM to release ur old STB link. (mac address if not mistaken) Then can login stb with ur account. |
|
|
|
|
|
Max
|
Oct 15 2019, 10:08 PM
|
|
|
QUOTE(shiraaaaa95 @ Oct 15 2019, 04:49 PM) Mahal ke harga dia ? taktahu cara guna House 1 phase or 3 phase power supply.? If 1 phase, should be no problem use powerline adapter. Rumah 1 fasa atau 3 fasa power elektrik? Biasa klau rumah 1 fasa, bole guna powerline adapter. |
|
|
|
|
|
Max
|
May 21 2020, 09:01 AM
|
|
|
QUOTE(chron3z @ May 21 2020, 02:36 AM) I've figured it out For Netis DL4480V 1. Click WLAN at the main horizontal green bar. Choose Basic Setting for 2.4GHz. In the "Mode" line, click "Multiple AP". 2. Enable AP1. Type a custom SSID. Apply changes. 3. Choose Security under 2.4GHz. Dropdown list, click on your custom new SSID. I chose WPA2 + PSK. Apply changes. 4. Now go to Setup at the main horizontal green bar. Choose Ethernet WAN. Click on Edit for the INTERNET Service Type. 5. Scroll down to Port Mapping. Disable Guest_1. This is your new SSID. Apply changes. 6. Now click on Edit for the IPTV Service Type. Scroll down to Port Mapping. Enable Guest_1. Apply changes. 7. Connect your Set Top Box to your new SSID. 8. ??? 9. Profit! Hows ur iptv thri wifi? Any lagging or stutters on sd or hd channels? |
|
|
|
|
Quote
0.0170sec
0.42
7 queries
GZIP Disabled