Been on the 500Mbps Turbo upgrade for months now

I just got a new router, DIR-880L and technician just delivered and installed a new top box, the EC6108V8 (I was away, family still around)

Took me 1 whole night setting up and the TV box keeps saying Central and Multiplexing Connectivity errors

Then when I open up the manual I notice:

1) Connect the Ethernet cable from the TV box to the port# of Residential Gateway - wait not the router!?!

2) Pick HyppTV(Streamyx) instead of HyppTV(Unifi)

Lo and behold - the IPTV login page showed up

Must be newbie.

In TM's parlance, the residential gateway is the router.

What's your old stb looks like?

Did you use it on tv with hdmi?

Because I was hoping they would change my stb too, but before they do anything I want to install file explorer first for installing apks

DIR842 router...
almost same setup as above...
Login modem setting > Internet > VLAN > Interface Traffic Type Setting > set Wireless Guest Zone to IPTV.
Go to Wireless > Guest Zone > Enable 2.4GHz > Choose your own SSID, password and always enable.
Go to Network > Advanced Settings > IPv4 Multicast Streams > Enable multicast.
Restart modem. Connect your HyppTV STB to guest WiFi SSID, done.

But very laggy......

Have you resolved your problem? Probably the STB has a weak Wifi. You can try using this pocket router that can transfer Wifi signal to the STB's Ethernet port.

https://www.tp-link.com/my/home-networking/...uter/tl-wr810n/

I'm using TP-Link PA4010. Most of the time it's OK. Only recently some channels eg Fox sometimes got satellite icon, which is OK after a few seconds, or if I quickly change channels. Probably some channels use higher bandwidth that my Powerline can barely handle (only 28 mbps link rate).

20m without any obstacle consider long not?
still lag, open radio same also lag....
is it possible to plug in usb wifi dongle into the stb to increase wifi signal...?
the powerline plug will be my last resort....

20m open area should be OK.

Yes, USB Wifi dongle possible, but I'm not sure whether it will help.

I guess the STB, or IPTV in general? doesn't like Wifi's higher latency.

I'm considering to upgrade to AV1000 powerline, for 100% reliable HyppTV. Right now I'd say mine is 99.5%. My TP-Link PA4010 is really old tech.

What router type can support Unifitv or Hypptv over wifi? Preferably the one with easiest settings and setup

Anyways I reset the entire router and re-do the settings. This time it worked without setting up IPv6 (left at "Local Connectivity Only") - home to figure out what's the proper IPv6 setting

Hi, i having the same problem for configuration of connect HyppTv using WIFI with Netis DL4480V. Anyone know the setting using Netis DL4480V?

hi , nak tanya kalau nak pasang hypptv dekat ruang dapur, kena gunakan cable yg panjang ke? dia cable kan bersambung dengan router unifi .bolen terangkan

Use Powerline:

https://www.dlink.com.my/product/dhp-p601av...igabit-adapter/

This post has been edited by taqu: Oct 15 2019, 10:58 AM

Mahal ke harga dia ? taktahu cara guna

Rega RM 169 kat Shopee.

Ada 2 adapter. Pasang Adapter 1 kat plug dinding dekat router, sambung network cable dari router ke Adapter 1. Pasang Adapter 2 kat plug dinding dapur, sambung network cable dari Adapter 2 ke HyppTV. On kan, siap

Not so fast. If the router and dapur is not on the same electrical circuit, good luck in getting anything at all.

How to explain that in BM in simplest way?

House 1 phase or 3 phase power supply.?
If 1 phase, should be no problem use powerline adapter.


Rumah 1 fasa atau 3 fasa power elektrik?
Biasa klau rumah 1 fasa, bole guna powerline adapter.

See reply above from Max.

Post #497

Dear all can request for help

I install hyyptv apk at ny unifi stb. I am ultimate pack subscriber.

When i use wifi at the box can watch all channel.

When i conect lan to stb from router. I can watvh channel only black screeb. I have try tobchange the lan port from router 1 2 3 4 .

Still the same any advice. As i need to use lan to get faster withband.

Can help