Guys, step 10-11 is actually pretty simple it's just that the language used in that guide is hard to understand. Lemme try to make it simple for you.
Just switch off your phone. No matter what step ur at, just switch off your phone. Easier this way. But before switching off, don't ever forget to enable USB debugging. This is important. Forget this and you'll brick your phone.
Then when you get to step 11, make sure your cable is already connected to the pc but do not connect your phone to the cable yet. Hit download button 1st, then just calmly but quickly pick up your phone, pressed & hold volume down only (no need to press power button cz your phone is already off). Then connect your phone to the cable quickly.
Now look at the progress bar, once it turns yellow u can let go of the volume button (though I never let go of it until the process is finished, just to make sure lol). Ur done when you see the big green tick. Your phone will then take sometime to load so don't panic if it's taking a bit too long in doing so.
How I read a few post up when phone is connected to cable after hitting download, nothing happens. Well this happened to me a few times. It's because the MTK Vcom driver is not installed correctly. Install it again, then repeat flashing until ur successful. If still no progress, try installing the driver from here
https://felixsenada.wordpress.com/2015/12/2...n-redmi-note-3/It should work. Good luck.