OMG
sure looks interesting...
it's kinda like WC Radiator
sure 1st of its kind for air cooling to have 2 x 12cm fan blowing in... that means 1 fan for 3 heat pipes
the fins also soldered to the copper base like xp-120, but this!!! hhmmm xp-240 la




would u look at that...


Source



where did u see the show at? right here in m'sia?

This post has been edited by E-J@1: Dec 6 2006, 07:09 AM

eehhh, 850g onli!!! CM hyper 6+ 795g... just another 50g onli, i'm sure any mobo can withstand that weight, otherwise why they do bother built it one

This post has been edited by E-J@1: Dec 6 2006, 12:51 PM

well some people consider looks & some don't...
for me as long it's perform well, i'll buy it... cause i don't care how it looks as long it cools my rig
for instance ur willing to place the fugly 2 x 120mm fan for ur hr-03 (don't be mad, giving my opinion onli )... i just can't wait for ur customized pci bracket

This post has been edited by E-J@1: Dec 6 2006, 01:39 PM

is it available yet?

well, every brand must got something to start with, maybe this will be CM's first product to raise to the top

hopefully this one is not too expensive lor... but then again i don't care if its expensive as long it shows promising performance (this cooler will be in my first waiting list)

This post has been edited by E-J@1: Dec 7 2006, 05:45 PM

dunno lor, but i bet i will be better cause two 120mm fan for 6 heatpipe, that means one fan for 3 heatpipe, unlike infinity and other tower cooler, although they can mount 2 x 120mm fan but front and back (blow same way), but this fujin

i wanna see ur rig too

what measurement should we be worried about (the height, length) ? here the dimension = 175x124.6x815mm 847g Source i'm sure it fits ur tsunami dream...

the height = 17.5 cm + 25 cm (fan), totaling 20cm, eeehhh same like ultra-120, then it will not fit in ur tsunami dream lor

should we also worried bout the location of the proc? ...




This post has been edited by E-J@1: Dec 8 2006, 08:58 PM

can't u flip the window upside down, making the case fan sits at the bottom near the pci slots....
or, u could just sell it to me

yep, i'm looking for a case now as currently having problem with mine now

weight = little heavy than xp-90c & little lighter than CM Hyper 6

i think for this cooler, definitely it will block GC, cause no board that places the proc socket way up near the psu, even if there is i think i will still block it...

for the rear exhaust fan, this i dunno ...

as for amd they have to recheck their socket adapter (which way does it face - like in the pic), lucky for 775 user, can mount anyway they want, don't have to worry lor

most motherboard manufacturer placed it on top-left corner, will this have a clearance issue?

r u gonna buy one?

u use what for the temp readings??? TAT or Default Temp Reader that comes with the mobo

i got the same proc with u, E6600, stock speed:
Thermaltake Golder Orb II --> idle:36~37c || load:47~49c (using EasyTune 5 --> Giga 945P-S3 mobo)

a lots of people gonna complain bout it... no manufacturer stupid enough to market their heatsink if there gonna be a helll of issues involved

damn, so big, i guess u don't need any ram fan cooler for that

why do we have to put lots of as5? mind to explain ur judgement on that

1. can't answer --> i dunno --> have to look former user of TTBT VX or a review for comparison, but if TTBT VX still wins by 1~3 degrees better take GeminII as it can cool off chipset + RAM
   
2. i don't think GeminII will bend mobos, dunno lor, i'm using it now, no benting (at the moment )
   
3. • GeminII = 175mm of Width
   • Motherboard = 244mm of Width (high-end mobo)
     
     from the measurement itself already shown that the cooler fan be fitted...
     
     but when we take fans into consideration there will be a problem
     
     fans on GeminII: 120mmx2 = 240mm
     fan on the rear case = 25mm (thickness)
     
     total space taken 240mm + 25mm + 5mm(space between rear case fan & GeminII Fans) = 270mm
     
     from the mobo stand off (the nearest to the 5" bay): make sure no chassis component (Case Parts or 5" Device) should be present within 3cm --> Cooler's Space (270mm) minus Mobo's Stand Off (240mm)
     
     i'm 100% sure GeminII can be fitted in CM5 if u do not have a device on the 5" Slot blocking it --> like old DVD-ROM place either on the 2nd, 3rd & 4th 5" bay slot

This post has been edited by E-J@1: Jul 4 2007, 07:46 PM

agre with you, doesn't mean u put 12x120mm ultra high speed fan in your chassis & get a water cooling result temp

wait till your ear drum break la, hahaha

This post has been edited by E-J@1: Jul 11 2007, 12:53 PM

interesting review

i did get the same temp like those in the review, E6600 (IDLE: 30-33 degrees | LOAD: 40-42 degrees)

TIM: AS5
Fans: All Vizo Starlet UV Fan (except for PSU fan)
GC: 6600GT
HDD: 1 unit only
OC Status: Anti-OCer no la waiting fund for new hi-performance RAM

before:
1x120mm intake (front panel
3x120mm exhaust (rear panel, psu & side panel --> GC Area)
1x80mm exhaust (top panel)

after:
1x120mm intake (front panel
3x120mm exhaust (rear panel, psu & side panel --> GC Area) 2x120mm exhaust (rear panel & psu)
1x80mm exhaust (top panel)

after 2 days changing to a new LiLi Side Panel (Full Transparent) the temps rise (IDLE: 35-37 degrees | LOAD: 45-47 degrees)

WTF weird huh just remove 1 exhaust fan the temps rise

any of u experience this? please enligh me

This post has been edited by E-J@1: Jul 12 2007, 09:36 PM