Reuleaux is coming out with a new RX200 chip which is claimed to be better than DNA200 as per ECF! Hmm.

if you not fancy on TC feature
you might try ijoy a160
the smallest dual battery size claim



p/s:
found out that the new model will come out
same feature with ijoy asolo with "taste control" (TC)
http://www.gearbest.com/temperature-contro.../pp_264705.html

Hi all,

A new Premium Vape Store is opening in Plaza Damas next month and are looking for staff. If you know of anyone interested in working in Vape Store, please let me know. Experience preferred but not necessary.

Looking for Vape Advisors, Vape Specialists & Vape Ambassadors. Several positions for each category available. Attractive salary + benefits + overriding + most importantly get to Vape all day in a super fun environment.

Let me know if you or anyone you know is interested.

Currently vaping My Man by One Hit Wonder (Managed to share funds with friends )

What I can say is, this juice will gunk your coil

But sure is taste good!

Im looking for any authentic tube mechanical mod for anyone to let go new or used. Kindly PM.

arent you curious why your readings are way off the claimed resistance? Imo if its 0.25 and showed more or less .05 ohms difference still fine. Yours + .12 ohms

aw talk so nice about IPV3 Li makes me goyang /shy

This post has been edited by Vail: Nov 21 2015, 11:35 AM

What kind of screw up? Yeah was thinking of getting from joenida

milkman mi-g mik arrived!!
after this going for muffin man ??or the man ?

Calling all DIY e-juice brewers in Sg Petani, Kedah: FREE liquid agitation and heat-steeping for 1 week!!

Info and address at-
https://forum.lowyat.net/topic/3781761

Please be considerate and use only heat-safe and tightly capped plastic bottles which are well-secured in a leak-proof cushioned laundry bag.

My Radius doesnt seem to give me very accurate readings. My Vaporflask will detect my TFGT2 ohm as 1.2, but when its on my Provari, it jumps from 1.4 to even 1.5. WTF.

As for the crown.. its like +10% extra reading on the Provari. When checking on the ohm meter, the reading is the same as the DNA40.

Also, im not sure if i got a clone Crown tank with OCCs. I will try to get a new coil and see how it goes.

yeah mate i screwed up few occs on other tank just because had wrong/inaccurate readings. Not sure about clone crown, but there is authentication code paper inside the authentic box.

ps: at work now left the box at home cant show you how it look like

Thanks mate. I found a yellow card board with a QR code which brought me to an authentication site, but i cant seem to find a serial number code to key in.
Hmm.. i could have bought a clone. (But the machining and build quality looks pretty good though)

i think you have the authentic lol. love how the build quality on the crown! ill get back later and check my box

I really hope so. But the darn incompatibility of my DNA mods and the 24 hour lasting coils are frigging annoying the crap outta me.

found a heatsink to use it with ur dna40 d?

Mod Review

Original Elephone ELE P70-LAISIMO 70W TC Box Mod - SILVER AND BROWN 156022201
Variable Wattage 5 - 70W / 510 thread / Magnetic Battery Cover / Power Ni Ti Mode

Company that create this mod is from a mobile phone company (elephone).
Been using it for 1 week now .. as usual there's pro and cons on this .. this is a TC mod and the current price is quite reasonable.
Been using it on Power mod and nickel mod .. dont expect this to be on par with dna and sx chip because this their own in house chip.
For Ni and Ti mode, i only able to adjust the temperature only .. the setting is decent enough ..
All setting can be view in their manual ..

Interior of the mod is quite simple .. battery easy to pull so there's no issue

Exterior .. As u can see they are using leather for their mod sleeves .. i ask them what kind of leather but then said just leather ..
my friends ask me to check for 3 dot .. i think this is not a real leather .. this base on my touch .. but still it put a very nice look on this mod.
So here are my pro and cons ..

Pro.
1) cheap for TC (Ni and Ti) mod
2) feel sturdy when hold
3) easy for replacing battery
4) the leather sleeves of course.

Cons.
1) Gap in 510 .. i suspect their 510 threading not very smooth..
2) Gap in their sleeves .. just a small gap but still a gap
3) Chip cant be upgrade (in house chip .. watuespek)
4) USB port at the bottom .. ( some dont mind but i do mind )
5) Rattle sound when shaking it. Sound comes from the button ..

Summary.
Will i buy it? Yes .. because of the price only .. but once hits Malaysia .. dont know how much the price will be mark up.
Is it worth it? Maybe, this is a company that design mobile phones .. so i assume their wiring inside the mod is top notch ..
This mod will enter our market within this month ..

Below is the link to see the product ..

http://www.gearbest.com/temperature-contro...paign=chenxinyi

Original Elephone ELE P70-LAISIMO 70W e-cig VW TC box mod
Three kinds of atomizer modes: Power / Ni / Ti
Super upgrade version TC mod
Unique PCB design with temperature control
Perfectly ergonomic design
HD OLED screen indication
Micro USB port charging
Using one piece 18650 battery (not included in the package)
Overcharge, low-voltage, over temperature, short-circuit protection
Material: Stainless steel + authentic leather
Wattage range: 5 - 70W
Temperatures control: 212 - 662F
Spring loaded 510 thread
Magnetic battery cover
Compatible resistance: 0.05 - 2.5ohm

Thx for reading

This post has been edited by ekudz: Nov 21 2015, 03:53 PM


Attached thumbnail(s)

Thanks for ur kind words but im juz a simple plug and play guy, no time to od that complicated build haha, thats why 40w already enough. Well then im gonna try look for vaporshark then. Ohh wats ur thought on lost vape's products, the efusion, esquare and epetite. Love the fibre finish. But dont know issit gonna feel good in hand.

This new model issit? Hard to find. Better suggest me established model hehe. Anyway thanks!

as u mentioned, the feel good in hand is a big factor for u and personally i think the vaporshark dna200 would be the one u looking for as the feel in hand is great, and its a dna chip like what u seek for (much more stable than dna40). but either way i think u might wanna consider the efusion as the price factor might play into purchasing the device in retail store.

vaporshark dna200 retail should be a lot more expensive than just converting USD$200 to RM as to factor all the import tax, shop rental, etc. (made in usa), vaporshark is US company and did not outsource china company to produce hence the cost for the device will be more expensive than the ones made in china. personally i feel vaporshark quality is better but the only con is probably the battery life ~roughly equal to 2700mAH when comparing a mod that uses 18650 battery but it made up with the fast-charge 2A for the Li-Po battery. the only DNA200 that has fast-charge.

whereas the efusion dna200 price will be definitely cheaper as its made in china and prices will vary by a margin as cost of labor and parts in china is a lot lesser cost to produce. so if u want a cheaper dna200 device and the feel of efusion is ok with u, go for it.
edit: just saw the review for efusion dna200, u can't access the battery unless u peel off the carbon fiber sticker and unscrew it.. poorly design IMO.
that depends on u though.

This post has been edited by z3r0h: Nov 21 2015, 04:34 PM

Hey Fanboi, vaporshark is made in China by Sbody in Shenzen. Go look it up.

hey u got butthurt by me is it? lol, fanboi? whatever dude

edit: seems like the S-BODY only manufactured in china? correct me if im wrong?

This post has been edited by z3r0h: Nov 21 2015, 04:49 PM