[/b]why pay more for branded stuff when what we have works just as well? performance brake pads, available for most makes, at half the price of leading brands, but works just as good! another afforadable performance product from maddriver's garage

Rapid Stop SS550 - 550c Super Street Series. Working temperature from 0c to 550c, recommended for driver who demand better braking ability, instant biting brake feel and weekend small track use. Recommended for light to medium weight car below 200hp.

Rapid Stop ST800 - 800c Super Track Series. Working temperature from 0c to 800c, recommended for driver who are looking for some serious braking performance, ability to withstand high temperature and several hour of abuse. Recommended for 200hp+ fast street, touge junkie, and weekend track use. These pads doesn't fade easily !

Rapid Stop ST900 - 900c Super Attack Series. Working tempreature 0c to 900c, recommended for those who want a more progressive pedal feel but still need high tempreature tolerance. recommended for those who want silent operation and serious braking performance. the choice of rally drivers!





RECOMMENDED RETAIL PRICE LIST

TEMPREATURE RATING
550 800 900
PRICE RM


PROTON

SAGA / WIRA / SATRIA 1.3/1.5 160.00 310.00 390.00

WIRA / SATRIA / PUTRA 180.00 340.00 430.00
1.6/1.8 PERDANA (F)

WAJA 1.6 / GEN2, PERSONA 180.00 360.00 440.00
SATRIA NEO / SAGA BLM
SAVVY (F)

PREVE / EXORA (F) 230.00 460.00 540.00

INSPIRA (F) 280.00 560.00 640.00

WIRA / SATRIA / PUTRA 140.00 260.00 340.00
1.6/1.8 ®

PERDANA / GEN2 / SATRIA 150.00 300.00 380.00
NEO / WAJA ®

INSPIRA ® 198.00 396.00 476.00



PERODUA

MYVI 1ST & 2ND GEN 160.00 320.00 400.00

KANCIL 160.00 320.00 400.00

KELISA / KENARI 150.00 300.00 380.00

ALZA 180.00 360.00 440.00

VIVA 190.00 380.00 460.00

DAIHATSU (F)

MIRA L2 168.00 336.00 416.00

MIRA L5 225.00 450.00 530.00

MOVE L9 249.00 498.00 578.00



NISSAN

LATIO / GRAND LIVINA / SYLPHY (F) 250.00 500.00 580.00

SENTRA B15 / N16 (F) 230.00 460.00 520.00

S15 / R32/33/34 250.00 500.00 580.00
FAIRLADY (F)

S15 / R32/33/34 180.00 360.00 440.00
FAIRLADY ®



TOYOTA

VIOS / ALTIS 1ST GEN (F) 280.00 560.00 640.00

VIOS / ALTIS 2ND GEN (F) 290.00 580.00 660.00

CELICA / WISH 1.8 (F) 300.00 600.00 680.00

CALDINA GT4 (F) 340.00 680.00 740.00

GT86 (F) 300.00 600.00 730.00


HONDA

JAZZ / CITY / CIVIC SO4 (F) 240.00 480.00 540.00

CIVIC FD2 1.8/2.0 (F) 310.00 620.00 700.00

CIVIC FD2 TYPE R (F) 380.00 760.00 800.00

EK9 / H22A (F) 230.00 460.00 540.00



SUZUKI

SWIFT M15A (F) 300.00 600.00 680.00



KIA

FORTE 1.6/2.0 (F) 280.00 460.00 540.00



SUBARU

WRX (SUMITOMO 4 POT) (F) 250.00 500.00 580.00
WRX STI (BREMBO) (F) 250.00 500.00 580.00



FORD

FIESTA 230.00 460.00 540.00



MITSUBISHI

EVO 1/2/3 260.00 480.00 560.00
EVO 7 280.00 530.00 590.00

call 013 3420849 for more info
C.O.D / installation / POS LAJU available



NOW AVAILABLE FOR PROTON PREV'E AND EXORA!



DEALERS WANTED!!!!! [

550 degree pads

800 degree pads

900 degree pads

This post has been edited by maddriver: Apr 13 2015, 11:00 AM

Some pictures, to get those dry mouths watering...

Initially, I thought my calipers were that of a 12v Saga, thus I went for the 550�C pads. The look like so:


Then, reality struck during installation. Mine were the old 8v Saga callipers
A quick call to the manufacturer & maddriver got me these... Saga 8v 450�C pads... and they looked HOT


Some pics of the installation (... I wish my callipers were cleaner )


I've been using them for quite a while now and trust me, they BITE No complaints so far

So, for those in the southern region interested, I'll try to get 'em for you. Here are the prices (per set) I've managed to get so far:

Saga 8v
450�C: RM100

Wira 1.5/Iswara 12v (1.3/1.5)
550�C: RM100

Wira 1.6/Wira 1.8/Perdana
550�C: RM130

Proton Waja
550�C:rm160.00

For other models, please PM either me or Mr. maddriver himself. Alternatively, you can post your questions on the thread as well

P.S: I'm warning you, they don't call him "maddriver" without a reason.... He is MAD!!!

This post has been edited by GoldenHawk: Apr 25 2007, 02:32 PM

... BLOODY double post ...

This post has been edited by GoldenHawk: Dec 5 2006, 10:57 PM

thanks for the pics!.......btw, don't say i'm mad in public......don't want men in white comming after me with straightjackets

woot finally got pics!
hoho cant wait for my turn ^^
so this saturday morning my booking is confirmed? =D
need instructions to reach to your garage tho..

got for daihatsu mira 12 inch double layer disc?

will let u know tomorrow

yup! call me for directions. see u on saturday!

Went to maddriver's garage at Shah Alam this morning. He guided me there, not too difficult to find ^^.

Did a whole brake renewal there. Got his RS 450C front disc brake pads for my kancil, and OEM Perodua rear drum shoes for the rear drum brakes. Did DOT4 bleeding too. At the same time, he found out that my rear brake pumps we're leaking. He called someone and bangs, few minutes later, they arrived with a new brake pump. Talk about speedy service =D. Workmanship was good, and maddriver himself is a very friendly chap. Gave me lots of advice for the car.

As for the brake pads, will reply back here once i bed in the pads and push the car =D. Thanks alot mad, u'll definately see me back there in the future =D

pm me price for vios.front only

yo bro got anything for Volvo 940 ?
If you have several volvo model do let me know ...
I can intro you to my VOCM kaki hehe

yay, finally got pictures!
UGPM, my car details

Please pm price for SEG AE101..tq

currently no, but with a minimum order of 5 sets per model, i can make them , no problems. s40, if it's the same as waja pads, that i have:-P

how about the dust...

Iszit as "friendly" as Project U to the disc rotor? If yes can consider! How bout the dust?

i think my brake pad oledi worn out here..

got any for Daihatsu Mira L5 13" front brake pad bro?

if got thinking of dropping by ur place

This post has been edited by moderno: Dec 14 2006, 05:25 PM

for L5, i have 550 degrees front brake pads. rm160.00. as for dust, sure to have a little. so far i find it to be quite friendly to the rotors.

any review....

just ask goldenhawk or daijoubu. or karamjit singh for that matter. he used the pads in the rally of malaysia in johor.

can post to PG?

no problem. what model?

Iswara 1.3
I'll be needing your bank acc number and total amount.

might be going up to penang after christmas. pm me your contact. rm80 for 450 degrees and rm 120 for 550 degrees. u pick the choice, we'll deliver.
cheers!

Sure thing.
But I thought the price was quoted at
Wira 1.5/Iswara 12v (1.3/1.5)
550�C: RM80

is yours a 8 valve or 12 valve engine type calipers? if it's a 12 valve type, then it's rm80. if it's a 8 valve type, then it's rm120, but i currently don't have stock for that.

My engine is a 12 valve so I guess the calipers should also be the same right?
What's the size difference between them?

different sized calipers. if yours is an original 12 valve, then no problem.

ok..then I'll get one from you when you get to Penang.
Would appreciate it if you could specify exactly when you'll be arriving as well.

need your address........mainland or island? might be there next weekend.

already PM'ed you yesterday.

dude, pls let me know if you dont wanna deal. I'll look somewhere else.

it's not that i don't wanna deal, need your full address & name. will be in penang next weekend.

Back with some updates =D. To put it in layman terms (cause im a layman im afraid ), this thing bites! I've never tested to the point where brake fade might occur, but compared to stock pads i had, this thing bites! Now i enjoy scaring my passengers by zooming to a speed bump and brake at the very last seconds

be careful. the brake pads are good to stop the car only if your tyres are ok! a friendly reminder from your friendly neighbourhood madman:-P

gen2 1.6 for front ...

how much bro?

haha thanks for the reminder. still havent changed the rears. when i do a hard brake before a bump with those yellow bumpy lines, my car would go skid-brake-skid-brake-skid-brake. hoho just like abs

hw much for hondacity 03-05? for front and back?

This post has been edited by sonictheory: Dec 29 2006, 08:15 PM

for the 7th Generation Honda Civic 2.0 year 2004, how much do you cost the full set with front and rear??how good it is to compare between the original set? will results very obviously difference in between? will it cause the noises when we brakin that time???

i can answer the noise part. me personally using it, i experience no noise during braking

bro, do u have those brake pad for move l9?

honda 2l civic front 550degrees at rm 230.00
honda city front 550 degrees at rm 190.00

these pads are made only with performance in mind. which would u rather have? a slient pad that does not stop your car? of a noisy pad that stops your car on a dime?


sorry, don't have pads for Move

This post has been edited by maddriver: Dec 30 2006, 07:34 PM

how much for front kancil brake? curently im using kancil caliper with mira double layer disc....

rm80.00

Are this brake pad touted "High Temp." brake pads? meaning it won't fade out during extreme braking for downhill?

can go down genting with foot on the brake pedal, no problems

need some customer review pls...

u can read through earlier posts on this thread............

do u have any for honda eg6?front&rear
plz quote me the price
tq

should be rm 230 for the front, rm230 for the rear. price given is for 550degree pads

PM prices for B14 imported model. Whatever stuff you have for it.

I tried some local pads only RM$80/= it was a one off......damn noisy even after break in period throughout. But the bite and the feedback.........freaking awesome. Oh everything is standard except for the pads. It was like the blue pad you have but not 'RS' brand.

How long have these been used on the roads. Rally's they change whenever they need to and change every race or even stage.

PM please.

sorry, i don't carry nissan unless it's the 4 pot calipers for the 300zx, r32,33,34 skyline. these pads are made only with performance in mind. they may squeal now and then, they may be dusty, but one thing's for sure, they bite like a rabid dog

these brake pads have lasted me slightly more than a year before i started selling them, they don't call me maddriver for nothing as for your question on rallies, from my personal experience, i go through 1 set of pads for every 2 rallies

Pm me for myvi. thanks

minimum order 5 sets.
one sets consist of front and back ?
and How much is per set ?
this is 550 celcius type right ?

need to see a sample first. 5 sets meaning 5 sets of front or 5 sets of rear of the same model. 550 type no problem. in fact, whatever the tempreature rating also no problem as long as i have a sample of the size, it can be made

bro, pm me the front & rear for saga 1.3 12V

mad, price for mit galant pads. not those twin pot types, its single.

thanks bro.... btw no more GRA kah u?

no time, lah! what size pads? need to check for size, but if they're the same as perdana, then it's rm130.00

Hi maddriver,
Here's the direction to your garage, give me discount for my next visit k? My Wira need to change brake pad soon


This post has been edited by Ryo`: Jan 29 2007, 02:51 PM

thanks! no problem. sure to get discount on your next visit!

Hi bro,
Regarding the brake pads that i changed last week, it start to create sharp "ngek ngek ngek" sound tis few days whenever i step on the brake pedal, the sound is quite loud, i even can hear it while cruising @ 100+-kph, is tis consider normal? Thx...

This post has been edited by Ryo`: Feb 5 2007, 01:22 AM

need to see the car. will be off line for about a week. pls call me for any enquiries.
cheers!

hi, i'm currently driving a iswara 1.5 manual, thinking of changing rear drum brakes to disc.. how much will it cost? inc installation thx

Err, I think he only deals with the pads, not the brakes itself
Anyway, no harm asking. He's quite resourceful He might be able to find a set for you
One from an old VR4 would cost you RM400 - RM500 minus mods & installation. Getting a complete front & rear set will set you back about RM1K
...but worth EVERY cent

At least that's what I feel

---

Added on March 3, 2007, 11:05 pmOh, another question:
You have anything for VR4 front & rears and Mirage c50 front & rears?

This post has been edited by GoldenHawk: Mar 3 2007, 11:05 PM

i have 550 degree pads for vr4 twin pot fronts, as for mirage, need to see the pads first

Boss...please pm me the price for the types of pads available for the saga1.5....tq...

Do you have stock for Evo4? How much?

i have stock, rm300 for front brake pads, 550 degree type

what about for the accord sm4 , front & rear. pm me for the price. tq

I'm interested in Honda City's aswell.
But you're saying the pads do make noises? Is it the embarassing "NGIIIIIIIIIIKKKK" sound.

This post has been edited by Denzy: May 1 2007, 09:28 AM

it's a low pitch sound

---

Added on May 10, 2007, 11:37 pmcurrent stock are as follows. all proton models, honda jazz, evo1/2/3/4/5/6 nissan skyline r32/33/34, mazda rx 7fd

This post has been edited by maddriver: May 10 2007, 11:37 PM

bro...
quote me with price for Gen2 1.3(A)..
front and rear brake pads...

TQ

only have front, 550 degrees, rm140.00

got pads for alfa 146 1.7 front/rear?, guess alfa 155 uses same...

is yours the selespeed model?

**** Review for Maddriver's garage

Went to chang emy Savvy's break pads at his place...

1). The map was really helpful

2). Extremely nice guy with a great and helpful personality

3). Quality, Quick and Efficient installation for the break pads.

4). Test driven by mad driver himself.

5). Can also expect a free drink

6). A really satisfied customer continues his journey and add's maddriver's garage in his highly recommended list for the automotic mechanical work (ANY SORT- FROM CRANK PULLEY TO BREAK CALLIPERS) any thing at all

Thumbs up for the great service and wish u all the best..

P.s im working on the custom's ok

no problem, take your time. thanks for the great review, and, yes, the drink's on me

Could ya PM me, the front and rear for 00 Cefiro Brougham pls? TQ

it sounds like gruuuud ..... low pitch noise...
but not noticeable unless u press the brake hard

can provide me price and temp. for one set for front disc brake and one set for rear drum shoe. Car model is Kancil EX850 yr 2000.

Btw how much does normally mechanics charge for replacing brake pad (i mean workmanship only)

Thanks.

@maddriver

remember me..come from KB-CH-ur shop?!
hope u will get 550 very soon, this wed or thursday ?!
let me know early.TQ

i'm in singapore now, the pads will be at my shop early next week. sorry for the delay.

Hi,

may i know how much for the kenari modal? may i know sec26 near which part coz i stay at sec28 only

Wat bout L2 13" Double Layer...PM me wif best price,ASAP...

rm80 for 450 degree pads

may i know what's the price both GTi n Wira 1.6 brake pads? front and rear discs... thanks..

front & rear same price. rm140 each

bro im llookign for bosch brake pad for my waja....i need 4 pieces...do u hv..thankss..pm me...

meaning the whole set it 280 or 560? huhu

bro do u hav brake pads 4 a ford laser year 92 and hw much

"Each" meaning a set for front or rear-lah
Total would be RM280.
Apa-lah!

sorry, no pads for ford