Looking for a V spec city for my wife, the dilemma is the GPS part

memang can add GPS into the pre-existing V spec HU??

My wife not keen to use the mirror-ing function.. as phone is not that reliable, eg no more data, no gps signal, phone no battery etc, wire rosak.. etc

Not too keen to spend another rm3k+ for the upgraded ori honda multimedia system+navigator

so, any 3rd party can do it all? mirror+gps+bluetooth+reverse camera?
another option.. is to get a standalone gps..
any idea?

i have do some research and found this Sony xav-68BT
bundle city 2015 casing ,gps (not sure using wat software) ,reverse camera with nightmode ,dvd player . 6.2inc touch screen ,about rm15xx-16xx

the problem is on the cabin filter provided by Honda itself. Replace it with Bosch Activated Carbon Cabin Filter for better air filtration.

Honda cabin filter cannot filter most of the hazardous smoke from outside . u need activated carbon filter , which provide more layer of filters

Sample of items , u can get cheaper at else where . google for it

hi there..i am interested in modding some parts as well.. can i know how much u get for the fork light? and where did u purchased it? I am driving E see now and currently modified a few things. Changed to a 17inch sport rims, Touch screen panel to kenwood ddx7015bt + reverse camera. Hopefully more to come.!

the player + reverse cam + wifi dongle cost me around RM1900 and yes, steering control all no problem

gps is not included, but can add in with extra cost.  u can either use cable or a wifi dongle for mirroring. and yes u can mirror ur phone to the screen to use waze and etc

https://www.facebook.com/hinganautoparts/

*the owner of this photo is in here too
*not cheap
[attachmentid=6040136]

I bought a set of mud guards from Taobao late last year, and encountered similar issue - no hole to screw.  Not sure the mud guards design is the same or not.

For my case - it is quite simple to  the rear mud guards. if you look carefully, there are 2 "notches" aligning to the "holes" on the mud guards, and I just screw into those notches (it is quite easy to do so), plus another fastener on the bottom.

As for the front - the holes are aligned to the 2 fasteners on the car, but the problem is that those plastic fastener are not suitable to fasten the thick mud-guard to the car body, and is quite hard to remove them as well (maybe I know the procedures and/or don't have the right tool to do the job).  At the end, I decided to just leave it as it is for the front wheels, and only install rear mudguard.

Just sharing my LEDs on my GM6 - part 3

Morimoto XB LED Fogs from https://www.theretrofitsource.com/complete-...ml#.VnIcl4Z97IU
[attachmentid=6058722]

Morimoto XB LED Fogs with yellow LaminX tint...
[attachmentid=6058782]

[attachmentid=6058723]

[attachmentid=6058724]

The 21 3535 LED T15 from AliExpress
[attachmentid=6058728]

The 21 3535 LED T15 output to the wall
[attachmentid=6058735]

[attachmentid=6058740]

[attachmentid=6058742]

16 CREE LED Projector T10 from AliExpress
[attachmentid=6058747]

[attachmentid=6058751]

Using Philips Vision LED T20 Red for my 3rd brake light
[attachmentid=6058757]

My LED collections
[attachmentid=6058759]

Just completed changing all my headlights bulb. Looks much cleaner without the orange signal bulb.

- Philips Crystal Vision 4300K H11
- Philips Xtreme Vision LED T10 Ceralight 360 6000K
- Philips Silver Vision WY21W

Thanks blurjoey sharing where to get the Silver Vision signal bulb